ECLC-HALO-0206D - Lighting Cotech - Free user manual and instructions

Product Type	Halogen Work Light with Tripod
Model	ECLC-HALO-0206D / ECLC-HALO-0206D-UK
Article Numbers	18-2160 / 36-3814
Voltage	220-240 V AC
Frequency	50 Hz
Max. Power Consumption	500 W
Light Source	Halogen R7s, 118 mm, max 500 W
Cord Length	2.5 m
Cord Type	Rubber cable H05RN-F 3×1.0 mm²
IP Rating	IP44 (indoor and outdoor)
Max. Height (Tripod Extended)	130 cm (legs in position A); higher with legs in position B
Tripod Leg Positions	Two positions (A and B)
Front Guard	Tempered glass
Adjustment	Height and tilt via screw knob
Safety Distance	Min. 1 m to nearest object
Overheat Protection	Let cool before changing bulb; do not cover
Certifications	CE (implied)

Frequently Asked Questions - ECLC-HALO-0206D Cotech

What type of bulb does the Cotech ECLC-HALO-0206D use?

The light uses a halogen R7s bulb with a length of 118 mm, rated for a maximum of 500 W. Always use a bulb of the same type and rating.

Can I use this light outdoors?

Yes, it has an IP44 rating, meaning it is splash-proof and suitable for outdoor use, but it should not be submerged or exposed to heavy rain.

How do I replace the bulb?

First, unplug the unit and let it cool down completely. Then unscrew the housing screw, open the light housing, remove the old bulb, insert the new one (R7s, 118 mm, max 500 W), and close the housing securely.

What is the maximum height of the tripod?

The tripod can be extended up to 130 cm safely with the legs in position A. For heights beyond 130 cm, you must set the legs to position B to prevent tipping.

How do I adjust the tripod legs?

To adjust the legs, push down the spring on the locking device and unfold them to the desired angle. Secure them by releasing the spring. There are two positions: A (narrower) and B (wider).

Is the light dimmable?

No, this light is not dimmable. It operates at full power when plugged in. Do not use with a timer or automatic switching device.

What safety precautions should I take?

Keep the light at least 1 m away from any objects. Do not cover it. Unplug when not in use. Let it cool before handling. Do not use near explosive gases or liquids.

Can I leave the light unattended?

No, never leave children unattended with this product. Always unplug the light when leaving it unattended.

What does the IP44 rating mean?

IP44 means the light is protected against solid objects larger than 1 mm (e.g., tools) and splashing water from any direction. It is suitable for both indoor and outdoor use.

How do I clean the light?

Unplug the light and let it cool completely. Wipe the exterior with a dry cloth. Do not use water or cleaning solvents. The tempered glass can be cleaned gently if needed.

USER MANUAL ECLC-HALO-0206D Cotech

Line drawing of a selfie stick with tripod base and camera mount (no text or symbols)

ART.NO. 18-2160 36-3814

MODEL ECLC-HALO-0206D-UK ECLC-HALO-0206D

Important!

Read the entire instruction manual carefully and make sure that you fully understand it before you use the equipment. Keep the manual for future reference.

Viktig information:

Original instructions

Bruksanvisning i original

Please read the entire instruction manual before using and save it for future use. We apologise for any text or photo errors and any changes of technical data. If you have any questions concerning technical problems please contact our Customer Service Department (see address on reverse).

Safety

• Please read the entire instruction carefully to ensure safe usage of this product.
  • Always place the tripod on a stable and solid surface where it cannot tilt.
• Ensure that the cable has not been damaged before use.
• Never place the cable against, or directly in front of the light source.
• Do not place the light angled directly toward a wall socket.
• Never cover the light in any way.
• Never leave children unattended with this product.
• Distance to nearest object in front of the light must be a minimum of 1 m.
  • Always unplug the unit when the light is not used.
• Before changing tube light, unplug the unit.
• The light becomes very hot. Let it cool down before changing tube light.
• Never use the light in areas where explosive gases or liquids are stored.
• If the protective glass, the rubber gasket or the cord is damaged, never use the unit before the damaged part is replaced.
• If the external flexible cable of this luminary is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer/his service agent.
• Never use the light with a timer or other equipment, which can turn on the light automatically.

Product Description

WARNING - RISK OF FIRE!

The three legs of the telescope stand can be set in two different positions, A and B. Note that if the telescope stand is extended more than 130 cm then the legs must be in position B, otherwise the whole telescope stand can fall over cause fire.

1. Light housing
2. Housing screw
3. Tempered glass
4. Front guard
5. Screw knob
6. Tripod pole
7. Locking nut for tripod
8. Locking device for tripod legs
9. Tripod legs
10. Rubber cord
11. Plug

Mounting

1. Before mounting check that no parts have been damaged during transport.
2. Unfold the tripod legs (9) by pushing down the spring of the locking device (8) downwards. Set the tripod legs in desired position.
3. Place the tripod on a solid surface where it cannot tilt.
4. Unscrew the housing screw (2) and open the light. Insert the tube light 500 W (R7s, 118 mm) and lock the housing screw again.
5. Open the screw knob (5) and attach the light to the tripod. Lock the screw knob carefully.
6. Adjust the height of the tripod by unscrewing the locking nuts (7) and lock after desired height is set.
7. Connect the plug (11) to a wall socket.

Specifications

Article 18-2160 / 36-3814

Type No. ECLC-HALO-0206D

Voltage 220–240 V AC, 50 Hz

Light source Max 1 × 500 W, R7s, 118 mm

Cord 2.5 m rubber cable H05RN-F 3 × 1.0 mm ²

IP class IP44 for indoor and outdoor

Halogenbelysning

ART.NR 18-2160

36-3814

MODELL

ECLC-HALO-0206D-UK

ECLC-HALO-0206D

ADVARSEL - FARE FOR BRANN!

VAROITUS - TULIPALOVAARA!

POSTAL 10 – 13 Market Place

Kingston Upon Thames

Surrey

KT1 1JZ

DEUTSCHLAND