HIVE Prodigy 3 Max - Headphones Niceboy - Free user manual and instructions

Product Type	Wireless Over-Ear Headphones
Brand	Niceboy
Model	HIVE Prodigy 3 Max
Bluetooth Version	5.3
Frequency Band	2.4 GHz
Maximum Radio Frequency Power	≤ 2.5 mW
Supported Bluetooth Profiles	A2DP, AVRCP, HFP
Supported Audio Codecs	SBC, AAC
Frequency Response	20 Hz - 20 kHz
Sensitivity	101 ± 3 dB
Playback Time	Up to 42 hours (at 100% volume)
Talk Time	Up to 35 hours
Wireless Range	Up to 10 m
Battery Capacity	380 mAh
Speaker Diameter	40 mm
Charging Time	Approximately 2 hours
Charging Port	USB-C (5V/1A)
Microphone	Yes, built-in
Controls	Multifunction button, Volume +/-, Next/Previous track
LED Indicator	Yes (charging, pairing, battery status)
Voice Assistant Support	Siri and Google Assistant (via double press)
Companion App	Niceboy ION (iOS and Android)
Safety Features	Hearing protection warning, avoid moisture and extreme temperatures
Environmental Compliance	RoHS

Frequently Asked Questions - HIVE Prodigy 3 Max Niceboy

How do I pair the headphones with my phone?

Press and hold the multifunctional button until the LED flashes blue-red and you hear an audio signal. Then activate Bluetooth on your device and select "Niceboy HIVE Prodigy 3 MAX" from the list.

How do I reset the headphones to factory settings?

Turn off the headphones, remove them from the paired devices list, and turn off Bluetooth. Power on the headphones to enter pairing mode (LED flashes blue-red). Then press and hold the "+" and "-" buttons simultaneously for 10 seconds. The LED will flash red 3 times and the headphones will power off.

How long does the battery last on a full charge?

Playback time is up to 42 hours at 100% volume, and talk time is up to 35 hours.

Can I use the headphones while they are charging?

It is not recommended to use the headphones while charging to avoid prolonging charging time and to preserve battery health.

How do I control music playback?

Play/pause: short press the multifunctional button. Next track: long press the "+" button. Previous track: long press the "-" button. Volume: short press the "+" button to decrease volume, short press the "-" button to increase volume.

How do I answer or reject calls?

To accept or end a call, short press the multifunctional button. To reject an incoming call, press and hold the multifunctional button for about 3 seconds.

How do I activate Siri or Google Assistant?

Double press the multifunctional button to activate the voice assistant on your connected smartphone.

How long does it take to charge the headphones?

Charging time is approximately 2 hours using the supplied USB-C cable with a 5V/1A charger.

Are the headphones water-resistant?

No, the headphones are not water-resistant. Avoid exposure to fluids and moisture.

Does the product come with a warranty?

Warranty information is provided by the manufacturer. Please check the product packaging or contact Niceboy support for details. Note: The battery is considered a consumable item with a lifespan of six months.

USER MANUAL HIVE Prodigy 3 Max Niceboy

User Manual / Wireless Headphones

CZ

OBSAH BALENÍ

NABÍJENÍ

https://niceboy.eu/cs/declaration/hive-prodigy-3-max

INFORMACE PRO UŽIVATELE K LIKVIDACI ELEKTRICKÝCH A ELEKTRONICKÝCH ZAŘÍZENÍ (DOMÁCNOSTI)

NABÍJANIE

Charging USB-C cable

Directions for use

PRODUCT DESCRIPTION

1. LED indicator
2. Increase volume/Next track
3. Multifunctional button
4. Decrease volume/Last track
5. Charging USB-C port
6. Microphone

CHARGING

We recommend to fully charge the battery before first use of the earphones. Use the supplied USB-C cable to charge the earphones. Maximum charging voltage and current are 5V / 1A. Charge the earphones when the LED indicator (1) flashes red. An acoustic signal warns you about the last several minutes of operation. It takes approximately 2 hours to fully charge the battery. During charging, the LED indicator remains red (1) and turns off once the charging is fully completed.

POWERING ON THE HEADPHONES AND CONNECTING TO BLUETOOTH

1. Press and hold the multifunctional button until the LED indicator starts to flash blue-red and the audio signal has sounded. The headphones can now in their pairing mode.
2. Activate Bluetooth on your device and select "Niceboy HIVE Prodigy 3 MAX" from the list of available devices. Your device will connect to the headphones. Once the pairing is successful, it will be announced by an audible queue and the LED indicator will begin to slowly flash blue.

Note: The headphones automatically connect to the device they were last connected to.

For the purpose of saving the battery, the headphones automatically power off after 5 minutes after having last connection to your device or if they are not connected to any device.

POWERING OFF THE HEADPHONES

To power off the headphones, press and hold the multifunctional button (3) until the audio signal sounds, and the LED indicator begins to shine red.

MUSIC CONTROLS

Playback/pause: short press the multifunctional button. (3)

Next track: long press the "+" button. (2)

Last track: long press the "-" button. (4)

Decrease volume: short press the "+" button. (2)

Increase volume: short press the "-" button. (4)

TELEPHONE CONVERSATIONS

To accept or end phone calls, short press the multifunctional button (3). Press the multifunctional button for about 3 seconds to reject an incoming call.

Note: Some phones have calls preferentially set to their own microphone and headphones. In such a case, change the selection according to the instructions on your mobile phone.

SIRI AND GOOGLE ASSISTANT

Activate in the emergency mode or when playing music by pressing the multifunctional button twice.

CONNECTING TO THE APP

1. Download the app by scanning the QR code using your mobile phone, or search for "Niceboy ION" in the mobile app store and download the app.
2. Start the „Niceboy ION“ app and sign up with a new account or use your existing account.
3. Proceed to the next step „Add device“ to set the password.

4. Switch on Bluetooth; nearby devices will be found based on the strength of the signal.

5. Press the „+“ button

6. Wait for the prompt „Connection“
7. Adding the device successful: „completed“ is displayed
8. Your device is successfully connected.

Note: Prior to pairing to any new device, it is necessary to reset the earphones to the factory settings each time when you wish to connect the earphones to the Niceboy ION app on the new device.

FACTORY SETTINGS

In case of technical problems, reset the earphones to the factory settings as follows.

1. Switch off the earphones, remove them from the paired devices list and turn off BT.
2. Switch on the earphones so that they are in pairing mode. The LED flashes alternately blue and red.
3. Press and hold buttons „+“ and „-“ simultaneously for a period of 10 seconds. The LED indicator flashes red 3 times, then it lights up red for one second, and the earphones will switch off.

SPECIFICATIONS

BT version: 5.3

Frequency band: 2.4GHz

Radio frequency power: ≤ 2,5mW

Supported BT profiles: A2DP, AVRCP,HFP

Supported codecs: SBC, AAC

Frequency: 20Hz - 20kHz

Sensitivity: 101+/-3dB

Playback period: up to 42 hours (on 100% volume)

Conversation period: up to 35 hours

Range: up to 10 m

Battery: 380mAh

Speaker: 40mm

Charging period: 2 hours

SAFETY INFORMATION

Listening to music at excessive volume can damage your hearing. Do not subject the equipment to fluids and moisture. Do not expose the device to excessively high/low temperatures, and do not attempt to disassemble it. Protect the device from sharp objects and falls from height. Batteries - Improper handling (prolonged charging, short circuit, breakage by other objects, etc.) may result in fire, overheating or battery leakage.

The battery or accumulator that may be included with the product has a life of six months because it is a consumable item.

Information on all frequency bands in which the radio equipment operates and intentionally transmits radio waves as well as the maximum radio frequency power transmitted in the frequency band in which the radio equipment is operated is included in the instructions and safety information.

The manual may be downloaded in its electronic form at www.niceboy.eu under the support section. NICEBOY s.r.o. hereby declares that the type of radio equipment Niceboy HIVE Prodigy 3 MAX complies with Directives 2014/53 / EU, 2014/30 / EU, 2014/35 / EU, and 2011/65 / EU. The full content of EU Declaration of Conformity is available on the following websites: https://niceboy.eu/en/declaration/hive-prodigy-3-max

USER INFORMATION FOR DISPOSING ELECTRICAL AND ELECTRONIC DEVICES (HOME USE)

This symbol located on a product or in the product's original documentation means that the used electrical or electronic products may not be disposed together with the communal waste. In order to dispose of these products correctly, take them to a designated collection site, where they will be accepted for free. By disposing of a product in this way, you are helping to protect precious natural resources and helping to prevent any potential negative impacts on the environment and human health, which could be the result of incorrect waste disposal. You may receive more detailed information from your local authority or nearest collection site. According to national regulations, fines may also be given out to anyone who disposes of this type of waste incorrectly.

User information for disposing electrical and electronic devices. (Business and corporate use) In order to correctly dispose of electrical and electronic devices for business and corporate use, refer to the product's manufacturer or importer. They will provide you with information regarding all disposal methods and, according to the date stated on the electrical or electronic device on the market, they will tell you who is responsible for financing the disposal of this electrical or electronic device. Information regarding disposal processes in other countries outside the EU. The symbol displayed above is only valid for countries within the European Union. For the correct disposal of electrical and electronic devices, request the relevant information from your local authorities or the device seller.

DE

LIEFERUMFANG

TÖLTÉS

PUNJENJE

Preporučujemo da u potpunosti napunite bateriju prije prve upotrebe slušalica. Koristite isporučeni USB-C kabel za punjenje slušalica. Maksimalni napon i struja punjenja su 5V/1A. Napunite slušalice kada LED indikator (3) treperi crvenom bojom. Zvučni signal upozorava vas na posljednjih nekoliko minuta rada. Za potpuno punjenje baterije potrebno je otprilike 2 sata. Za vrijeme punjenja LED indikator ostaje crvene boje (3) i isključuje se kada je punjenje potpuno završeno.

UKLJUČIVANJE SLUŠALICA I UPARIVANJE S BLUETOOTH

1. Pritisnite i zadržite multifunkcijski gumb (3) pritisnutim dok LED indikator ne počne treperiti plavo-crvenom bojom i dok se ne uključi zvučni signal. Slušalice se sada nalaze u režimu uparivanja.
2. Na svom uređaju aktivirajte Bluetooth i u popisu dostupnih uređaja izaberite „Niceboy HIVE Prodigy 3 MAX“. Uređaj će se priključiti na slušalice. Uspješno uparivanje najavi akustično upozorenje i LED indikator počinje polako treperiti plavom bojom.

ŁADOWANIE

POLNJENJE

https://niceboy.eu/sl/declaration/hive-prodigy-3-max

INFORMACIJE ZA UPORABNIKE GLEDE ODSTRANJEVANJA ELEKTRIČNE IN ELEKTRONSKE OPREME (GOSPODINJSTVA)

ÎNCĂRCAREA

Codecuri acceptate: SBC, AAC

Frecventa: 20Hz - 20kHz

Sensibilitate: 101+/-3dB

Timp de functionare: pana la 42 ore (la volum 100%)

Perioada de convorbire: pana la 35 ore

Distanta de transmisie: pana la 10 m.

Bateria: 380mAh

Difuzor: 40mm

Perioada de alimentare: 2 ore

INFORMATII PRIVIND SIGURANTA

ЗАРЕЖДАНЕ

Praha 4, Czech Republic, ID: 294 16 876.

Made in China.

RoHS CE 📧 ✉