Prisma Par 50 - Machine à effets lumineux Elation - Free user manual and instructions
Find the device manual for free Prisma Par 50 Elation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Can with Effects |
| Brand | Elation |
| Model | Prisma Par 50 |
| Category | Lighting Effect Machine |
| Light Source | 50W RGBW LED |
| Beam Angle | 25° |
| DMX Channels | 4, 6, or 8 selectable |
| Control Protocol | DMX512, Master/Slave, Sound Active |
| Color Mixing | RGBW additive mixing |
| Strobe | Variable speed from slow to fast |
| Dimmer | 0-100% linear |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 60W max |
| Dimensions (L x W x H) | 7.5 x 6.3 x 6.3 in (191 x 160 x 160 mm) |
| Weight | 2.2 lbs (1.0 kg) |
| Housing Material | Cast aluminum |
| Cooling | Passive convection |
| IP Rating | IP20 (indoor use only) |
| Mounting | Floor standing or truss mounting via included bracket |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Included Accessories | Power cord, DMX cable, mounting bracket, user manual |
| Maintenance | Clean lens with a soft cloth and mild detergent; avoid solvents |
| Safety | Do not expose to moisture; disconnect power before cleaning; allow cool down before handling |
| Spare Parts | LED module, power supply unit, DMX connectors available via Elation |
| Warranty | 2 years limited |
Frequently Asked Questions - Prisma Par 50 Elation
What is the beam angle of the Prisma Par 50?
The Prisma Par 50 has a 25° beam angle, making it suitable for tight spot effects and washes.
How do I set the DMX address on the Prisma Par 50?
Use the onboard control panel with LED display. Navigate to the DMX Address menu, then use the Up/Down buttons to set the desired address (1-512).
Can the Prisma Par 50 be used outdoors?
No, the Prisma Par 50 has an IP20 rating and is designed for indoor use only. Protect it from moisture and dust.
What is the power consumption of the Prisma Par 50?
The maximum power consumption is 60W at 100-240V AC, 50/60Hz.
How many DMX channels does the Prisma Par 50 use?
It supports 4, 6, or 8 DMX channels, selectable via the control panel for different operation modes (RGBW, RGBW + strobe, etc.).
Does the Prisma Par 50 have sound-activated mode?
Yes, it includes a sound-active mode that responds to music via a built-in microphone. Enable it from the control menu as Sound Active.
How do I clean the Prisma Par 50 lens?
Use a soft lint-free cloth slightly dampened with water or a mild detergent. Avoid abrasive cleaners or solvents that may damage the lens coating.
What is the warranty on the Elation Prisma Par 50?
Elation offers a 2-year limited warranty covering defects in materials and workmanship. Register your product online for warranty validation.
Can I replace the LED module in the Prisma Par 50?
Yes, the LED module is replaceable. Contact Elation support or an authorized service center for replacement parts and installation instructions.
What is the weight of the Prisma Par 50 fixture?
The fixture weighs approximately 2.2 lbs (1.0 kg), lightweight and easy to mount on truss or light stands.
User questions about Prisma Par 50 Elation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Machine à effets lumineux in PDF format for free! Find your manual Prisma Par 50 - Elation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Prisma Par 50 by Elation.