Torus T1215 - Pregnant Martin Audio - Free user manual and instructions
Find the device manual for free Torus T1215 Martin Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive 2-way loudspeaker |
| Low Frequency Driver | 12" (305 mm) neodymium |
| High Frequency Driver | 1.5" (38 mm) compression driver |
| Frequency Response (-10 dB) | 55 Hz – 20 kHz |
| Sensitivity (1W/1m) | 98 dB |
| Power Handling (AES) | 400 W continuous, 1600 W peak |
| Impedance | 8 ohms nominal |
| Maximum SPL (peak) | 131 dB |
| Enclosure Material | Birch plywood |
| Finish | Textured black paint |
| Grille | Perforated steel with acoustically transparent foam |
| Connectors | 2 x Neutrik speakON NL4 |
| Rigging Points | M10 threaded inserts |
| Dimensions (H x W x D) | 600 x 365 x 380 mm (23.6 x 14.4 x 15.0 in) |
| Weight | 22.5 kg (49.6 lbs) |
| Operating Temperature Range | 0°C to 40°C (32°F to 104°F) |
| Maintenance | Clean grille and enclosure with a soft dry cloth; avoid solvents |
| Safety | Install securely to prevent falling; use proper rigging hardware |
| Spare Parts & Repairability | Contact Martin Audio or authorized service centers for genuine replacement parts |
Frequently Asked Questions - Torus T1215 Martin Audio
What is the recommended amplifier power for the Torus T1215?
For optimal performance, use an amplifier that delivers between 800 W and 1600 W into 8 ohms (program power). The speaker can handle 400 W continuous (AES) and 1600 W peak.
Can I use the T1215 in a permanent installation?
Yes, the T1215 is suitable for both portable and permanent installations. It features M10 rigging points and a durable plywood enclosure with a textured black finish.
What is the impedance of the Torus T1215?
The nominal impedance is 8 ohms. It can also be used in parallel with other 8-ohm speakers if the amplifier load is within limits.
How do I clean the speaker grille?
Remove the grille carefully and clean with a soft brush or vacuum to remove dust. Wipe with a slightly damp cloth if needed. Do not use harsh chemicals.
What type of connectors does the T1215 use?
The speaker is equipped with two Neutrik speakON NL4 connectors wired in parallel (pin 1+ and 1- for the full-range signal).
Can I use the T1215 as a stage monitor?
While primarily a full-range cabinet, the T1215 can be used as a side fill or wedge monitor due to its compact size and 60° x 40° coverage pattern.
What is the coverage angle of the high-frequency horn?
The constant directivity horn provides a 90° horizontal by 60° vertical coverage pattern.
Is the Torus T1215 weather-resistant?
The standard version is not weather-resistant. For outdoor use, protect from direct rain and humidity. Martin Audio offers weatherized options separately.
How do I mount the speaker on a tripod pole?
The T1215 has a pole mount socket (35 mm) on the bottom. Insert a tripod pole and secure with the locking knob.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com and the Martin Audio website. It includes detailed specifications and installation instructions.
User questions about Torus T1215 Martin Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual Torus T1215 - Martin Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Torus T1215 by Martin Audio.