GS-1008PH - Switch Edimax - Free user manual and instructions
Find the device manual for free GS-1008PH Edimax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gigabit PoE+ Switch |
| Ports | 8 x 10/100/1000 Mbps PoE+ (802.3at) |
| PoE Budget | 120W total, up to 30W per port |
| Switching Capacity | 16 Gbps |
| MAC Address Table | 8K entries |
| Dimensions (W x D x H) | 235 x 105 x 27 mm |
| Weight | 0.75 kg |
| Power Supply | Internal AC 100-240V, 50-60Hz |
| Cooling | Fanless |
| Mounting | Desktop or wall-mountable |
| LED Indicators | Power, Link/Activity, PoE |
| Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3at, 802.3x |
| Operating Temperature | 0°C to 40°C |
| Housing Material | Metal |
| Certifications | CE, FCC |
| Cleaning Instructions | Wipe with dry, soft cloth. Do not use liquids or solvents. |
| Safety Precautions | Keep away from water, use proper power cord, ensure ventilation. |
| Spare Parts / Repairability | No user-serviceable parts. Contact Edimax support for repairs. |
Frequently Asked Questions - GS-1008PH Edimax
How do I reset the Edimax GS-1008PH to factory defaults?
The GS-1008PH is an unmanaged switch, so there is no reset button. Simply power cycle the device to clear temporary issues.
Does the GS-1008PH support PoE+?
Yes, it supports IEEE 802.3at PoE+ with up to 30W per port.
How do I install the switch?
Connect power, then connect your devices using Ethernet cables. No configuration is required for basic operation.
Can I mount the switch on a wall?
Yes, the switch has mounting holes for wall installation. Use appropriate screws (not included).
What is the total PoE power budget?
The total PoE budget is 120W, shared across all ports.
How can I check if a port is working?
Check the LED indicators: green for link/activity, orange for PoE. Consult the manual for LED behavior.
Is this switch managed or unmanaged?
It is an unmanaged plug-and-play switch. No configuration is needed.
What type of Ethernet cables should I use?
Use Cat5e or higher cables for Gigabit speeds and PoE.
How do I clean the switch?
Unplug the switch and wipe the exterior with a dry, lint-free cloth. Do not use liquid cleaners.
What should I do if a PoE device is not powering on?
Check the PoE LED on that port. Ensure the device requires ≤30W and the total budget is not exceeded. Try another port or cable.
User questions about GS-1008PH Edimax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual GS-1008PH - Edimax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS-1008PH by Edimax.