Z31953 - Uncategorized CRIVIT - Free user manual and instructions

Product Type	Paddling Pool
Brand	Crivit
Model	Z31953
Dimensions (inflated)	196 x 145 x 58 cm (max height)
Weight	3000 g (3 kg)
Material	Inflatable plastic (PVC)
Intended Use	Outdoor play / paddling, private use only
Valve Type	Screw-on valve with end caps
Included Accessories	2 patches for repairs, 2 screw-on valves, instruction manual
Assembly	Inflatable, no tools required
Pump Requirement	Manual pump only; do not use compressor
Operating Temperature	15 °C to 40 °C
Safety Features	Warning: risk of drowning; empty when not in use
Cleaning	Slightly damp, lint-free cloth; no abrasive cleaners
Storage	Completely dry, dark, cool place (10-20 °C), away from children
Water Change Frequency	Frequently, especially in hot weather or when visibly contaminated
Repair Patches	Included for fixing punctures
Pillow Valve	Separate valve for integrated pillow
Warranty	3 years from date of purchase
CE Marking	Yes

Frequently Asked Questions - Z31953 CRIVIT

How do I inflate the paddling pool properly?

Roll out the pool and check for damage. Open the valve by turning the end cap counterclockwise. Use a manual pump only; never use a compressor. Stop inflating when resistance increases and seams begin to stretch to avoid tearing.

Can I use a compressor to inflate the pool?

No, do not use a compressor. Only manual pumps or pumps specifically designed for inflatable plastic products should be used to prevent damage.

How do I deflate and store the pool?

Open the air valve by turning the stopper counterclockwise. Press the sides of the air valve together to release air. Ensure the pool is completely dry before folding. Store in a dark, dry place at 10-20 °C, away from children.

What is the weight capacity of the pool?

The manual does not specify a weight capacity. However, the maximum water depth should not exceed the children's shoulders when seated, and the pool is designed for paddling, not diving.

How do I clean the paddling pool?

Use a slightly damp, lint-free cloth. Do not use corrosive or scouring detergents. Change the water frequently, especially in hot weather or when visibly contaminated.

What should I do if the pool gets a puncture?

Use the included repair patches. Clean and dry the area, apply the patch firmly, and follow the instructions on the patch packaging.

Is the pool safe for children?

Never leave children unattended. The pool can cause drowning in very small amounts of water. Fill only to a depth that does not exceed children's shoulders when seated. Do not place on hard surfaces like concrete or asphalt.

What is the warranty period and what does it cover?

The warranty is 3 years from the date of purchase. It covers material or manufacturing faults. Normal wear, damage from improper use, and fragile parts like glass are not covered.

Can I use the pool in cold or hot weather?

The recommended ambient temperature is between 15 °C and 40 °C. In cold weather, air contracts, so you may need to add air. In hot weather, air expands, so you may need to release some air to avoid overinflation.

How do I adjust air pressure in different temperatures?

In cold weather, add more air if the pool appears soft. In hot weather, release some air by opening the valve slightly. Always check the pressure by feel; the pool should not be rock hard.

USER MANUAL Z31953 CRIVIT

Operation and Safety Notes

HU

FÜRDÖMEDENCE

GB Operation and Safety Notes Page 4

Line drawing of a person kneeling on a large rectangular object, holding a coiled cable or tape (no text or symbols)

Paddling Pool

- Intended use

This article is intended for use for playing / paddling. This product is intended for private, outdoor use only. The product is not intended for commercial use.

● Description of parts and features

1 End cap
2 Valve opening
3 Stopper
4 End cap
5 Valve opening
6 Valve (for pillow)
7 Patches for repairs

- Technical data

Dimensions:approx.

196×145×41/58cm

(when inflated)

Weight: approx. 3000 g

- Contents

1 paddling pool
2 screw-on-valve
2 patches for repairs
1 instruction manual

Safety advise

Avoid the risk of injury!

RISK OF

WARNING!

LOSS OF LIFE OR ACCIDENT

TO INFANTS AND CHILDREN!

Never leave children unsupervised with the packaging material or the product. The packaging material presents a suffocation hazard and there is a risk of loss of life from strangulation and / or drowning. Children often underestimate danger. Always keep the product out of reach of children.

Children can drown in very small amounts of water. Empty the pool when not in use.
- Do not install the paddling pool over concrete, asphalt or any other hard surface.
- When filling with water, the maximum depth of the water should not exceed children's shoulders in sitting position.
■ Once inflated, make sure that the product does not come in contact with stones, gravel or other sharp objects which could puncture the item.

Operation

Note: Before using the product for the first time, check it carefully for holes, porous places and seams that are not airtight.

Recommendation: Pump the product up and leave it alone for one day. Let a new product air outside in fresh air for a couple of days.

- Pumping up the product

CAUTION! Inflatable plastic products react sensitively to the cold and hot. That is why you should never use the product when the ambient temperature falls to below 15 °C and rises above 40 °C.

Otherwise damage to the product may result.

Note: Basically, only an adult should be responsible for pumping the pool up. Make sure that you do not pump too much air into the product. On no account should you use a compressor. Stop the process when resistance increases during pumping and the

seams start to stretch. Otherwise the material might tear. Only use manual pumps and / or pumps specifically designed for use with inflatable plastic products.

☐ Roll the product out first and then check for holes, tears and other damage (see Fig. A).
☐ Turn the end cap 1 of the valve opening 2 anti-clockwise off the air valve in order to open it.
☐ Take the end cap 4 off the valve opening 5 in order to open the valve 6.
□ Pump the product up.

IMPORTANT! Keep in mind that air temperature and weather conditions can affect the air pressure inside inflatable products. In cold weather the product behaves as if it has less air pressure in it because the air inside contracts. Under these conditions you may have to add air. In hot weather the air inside expands. Under these conditions you may have to remove air in order to avoid overfilling.

☐ Turn the end cap 1 of the valve opening 2 clockwise onto the air valve to close it.
☐ Place the end cap 4 onto the valve opening 5 in order to close the valve 6.

- Deflating the product

☐ Turn the stopper 3 anti-clockwise to open the air valve.
☐ Pull the end cap 4 off the valve opening 5 in order to open the valve 6.
☐ Press the sides of the air valve 6 together using your thumb and index finger.
□ Allow the air to escape completely.
□ Slowly fold the product together (see Fig. A).

Note: Make sure that the product is completely dry before folding it together.

- Cleaning and Maintenance

• On no account should you use corrosive or scouring detergents.
  ☐ Use a slightly damp, lint-free cloth to clean the product.

Change the water of paddling pools frequently (particularly in hot weather) or when noticeably contaminated.

- Storage instruction

☐ Make sure that the product is completely dry both inside and out when wishing to store it for any length of time. Otherwise mildew and mould may form.
□ Store the product in a dark, dry place – out of reach of children.
☐ The ideal storage temperature is 10 - 20 °C.
☐ Ensure that the product does not come into contact with sharp objects during storage.

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

Warranty

The device has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this device is 3 years from the date of purchase. Should this device show any fault in materials or manufacture within three years from the date of purchase, we will repair or replace it - at our choice - free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of

purchase. This warranty becomes void if the device has been damaged or improperly used or maintained.

The warranty applies to faults in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

CE

Brodzik