Multi FX 1U - Keyboard Intellijel - Free user manual and instructions
Find the device manual for free Multi FX 1U Intellijel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Multi-Effects Module |
| Module Width | 1U (single tile) |
| Dimensions (without power cable) | 45mm x 128.5mm (faceplate) |
| Depth | Approximately 30mm |
| Weight | Approximately 80g |
| Power Supply | +12V (50mA), -12V (20mA) via Eurorack bus |
| Power Connector | 10-pin ribbon cable (Doepfer standard) |
| Main Functions | Multi-effects processor with delay, reverb, chorus, phaser, pitch shift, and filter |
| Effect Parameters | Control knobs: Mix, Time, Feedback, Tone, and algorithm select |
| Audio Inputs | 1x mono input (3.5mm jack) |
| Audio Outputs | 1x mono output (3.5mm jack) |
| CV Inputs | 1x CV control (0-5V for parameter modulation) |
| Controls | Knobs: Mix, Time, Feedback, Tone; Button: algorithm select; LEDs: status |
| Construction Material | Aluminum faceplate, steel casing |
| Care and Cleaning | Wipe with dry cloth; avoid liquids and abrasive cleaners |
| Safety | Do not expose to moisture; ensure proper power before connecting |
| Spare Parts and Repairability | Contact Intellijel support for replacement knobs or power connectors |
| General Information | Designed for use in Intellijel 4U or 7U cases with 1U tile row |
Frequently Asked Questions - Multi FX 1U Intellijel
Can I use the Multi FX 1U in any Eurorack case?
The module is designed for 1U tile rows, typically found in Intellijel cases. It can be used in other cases with a 1U tile adapter, but ensure +12V and -12V power is available.
How do I select different effects?
Press the algorithm select button to cycle through effects: delay, reverb, chorus, phaser, pitch shift, and filter. The current algorithm is indicated by the LED color.
What is the maximum CV input voltage?
The CV input accepts 0-5V. Exceeding 5V may cause clipping or damage. Use a dedicated CV source to modulate parameters like Time or Feedback.
Can I use it with line-level audio sources?
Yes, the input is designed for modular-level signals (10Vpp). For line-level, adjust the source volume or use an external preamp.
How do I clean the module?
Disconnect power and wipe the faceplate with a soft, dry cloth. Do not use solvents or liquids. For stubborn dirt, lightly dampen the cloth with water.
Is the module compatible with 5V rails?
No, it requires only +12V and -12V. Connect the ribbon cable carefully: red stripe indicates -12V.
What does the Mix knob control?
The Mix knob blends the dry (unprocessed) signal with the wet (effected) signal. Fully clockwise is 100% wet.
Can I use external effects pedals with this module?
The Multi FX 1U does not have send/return loops. Use a separate I/O module to integrate external pedals.
What is the power consumption?
It draws approximately 50mA from +12V and 20mA from -12V. Check your case's power capacity before adding multiple modules.
Where can I download the user manual?
The manual is available for free on notice-facile.com and the official Intellijel website in PDF format.
User questions about Multi FX 1U Intellijel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Keyboard in PDF format for free! Find your manual Multi FX 1U - Intellijel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Multi FX 1U by Intellijel.