ORION9109S - Range hood KKT Kolbe - Free user manual and instructions
Find the device manual for free ORION9109S KKT Kolbe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Range hood (wall-mounted) |
| Brand | KKT Kolbe |
| Model | ORION9109S |
| Width | 90 cm |
| Depth | 50 cm |
| Height (adjustable) | 35–50 cm |
| Weight | Approximately 15 kg |
| Power supply | 220–240 V, 50 Hz |
| Maximum power consumption | 220 W |
| Motor type | Single motor, induction |
| Number of speeds | 3 |
| Extraction capacity | 620 m³/h |
| Noise level | 55–68 dB(A) |
| Lighting | 2 x 3 W LED (warm light) |
| Filter type | Aluminum grease filter, washable |
| Mode | Ducted or recirculating (charcoal filter optional) |
| Control type | Electronic buttons |
| Material | Stainless steel |
| Maintenance | Clean grease filter monthly; replace charcoal filter every 6 months |
| Safety features | Automatic shut-off if overheating; child lock? |
| Spare parts | Available from KKT Kolbe service center |
| Warranty | 2 years |
Frequently Asked Questions - ORION9109S KKT Kolbe
How do I install the ORION9109S range hood?
Installation should be done by a qualified professional. Ensure the hood is at least 65 cm above the hob for gas cooktops or 50 cm for electric. Follow the mounting template and secure to wall anchors.
How often should I clean the grease filter?
Clean the aluminum grease filter every month with warm water and mild detergent. It is dishwasher safe. A clogged filter reduces suction efficiency.
Can I use the hood without ducting?
Yes, you can use it in recirculating mode with an optional charcoal filter. The charcoal filter traps odors and must be replaced every 6 months.
The LED lights are not working. How do I replace them?
The LED lights are integrated and not user-replaceable. Contact KKT Kolbe service for assistance.
What is the noise level of this hood?
The noise level ranges from 55 dB(A) at low speed to 68 dB(A) at high speed. It is designed to be relatively quiet for its capacity.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the speed button for 3–5 seconds until the indicator light turns off or resets.
The hood doesn't turn on. What should I check?
First, check the power supply and circuit breaker. Ensure the plug is securely connected. If still not working, the motor or control board may be faulty.
Can I use the hood with a flexible duct?
Yes, but for optimal performance, use a rigid duct with smooth interior. Flexible ducts can reduce airflow and increase noise.
What type of charcoal filter is compatible?
Use only KKT Kolbe charcoal filter model CF-ORION. It measures 30x30 cm and fits securely into the filter panel.
How do I adjust the height of the chimney?
The upper chimney section can be extended to match ceiling height. Loosen the screws on the side, adjust, then tighten. Ensure the chimney is flush with the ceiling.
User questions about ORION9109S KKT Kolbe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual ORION9109S - KKT Kolbe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ORION9109S by KKT Kolbe.