FMM401 - Slicer BLAUPUNKT - Free user manual and instructions

Find the device manual for free FMM401 BLAUPUNKT in PDF.

BLAUPUNKT FMM401 - Slicer
📄 80 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice BLAUPUNKT FMM401 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Electric Food Slicer
Brand Blaupunkt
Model FMM401
Dimensions (H x W x D) Approximately 25 x 35 x 30 cm
Weight Approximately 3.5 kg
Power Supply 220-240 V, 50/60 Hz
Power Consumption Approximately 150 W
Blade Material Stainless Steel
Blade Diameter Approximately 17 cm
Adjustable Thickness 0 to 15 mm
Food Carriage Sliding carriage with pusher
Safety Features Safety switch, non-slip feet, blade guard
Material Housing Stainless steel and plastic
Cleaning Removable blade, dishwasher-safe parts
Warranty 2 years
Certifications CE, RoHS
Cord Length Approximately 1.2 m

Frequently Asked Questions - FMM401 BLAUPUNKT

How do I adjust the slice thickness on the Blaupunkt FMM401?
Turn the thickness adjustment knob located on the side of the slicer. The dial indicates thickness from 0 to 15 mm. Start at a low setting and increase as needed.
Can I clean the blade in a dishwasher?
Yes, the stainless steel blade is removable and dishwasher-safe. For hand washing, use warm soapy water and a soft cloth. Always handle the blade carefully due to sharp edges.
Is the slicer safe to use?
Yes, it includes a safety switch that prevents operation if the blade guard is not properly positioned. Additionally, the non-slip feet keep the slicer stable during use.
What types of food can I slice with the FMM401?
You can slice a variety of foods including meat, cheese, bread, vegetables, and fruits. For hard or frozen items, allow them to thaw slightly for optimal results.
How do I clean the slicer after use?
Unplug the slicer and remove the blade. Wash the blade, food carriage, and other removable parts in warm soapy water or a dishwasher. Wipe the main body with a damp cloth. Dry all parts thoroughly before reassembly.
What is the maximum slice thickness?
The maximum slice thickness is 15 mm (about 0.6 inches), adjustable in small increments for precision.
Does the slicer come with a warranty?
Yes, the Blaupunkt FMM401 comes with a 2-year warranty against manufacturing defects. Keep your proof of purchase for service.
Can I use the slicer for frozen meat?
It is not recommended to slice frozen meat as it may damage the blade or motor. Thaw meat partially until it is firm but not hard.
How do I assemble the slicer?
Place the slicer on a flat surface. Attach the food carriage to the sliding rails. Ensure the blade is securely fitted and the thickness knob is set to your desired level. Close the blade guard and plug in.
Where can I find replacement parts?
Contact Blaupunkt customer service or visit their official website for genuine replacement blades and other parts. Use only authorized parts for safety.

User questions about FMM401 BLAUPUNKT

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Slicer in PDF format for free! Find your manual FMM401 - BLAUPUNKT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FMM401 by BLAUPUNKT.

USER MANUAL FMM401 BLAUPUNKT

Enjoy it.

Meat mincer Fleischwolf Maszynka do mielenia Mlynek na maso Stroj na mletie mäsa Húsdaráló Aparat za mletje mesa

IMPORTANT NOTES

Before using this device, read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.

This device is for domestic use only. Do not use for any other purposes.

The device should only be connected to a socket with values corresponding to the values on the rating label.

It is necessary to check if the total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.

If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.

Do not let the cord hang over the edge of a counter, or touch any hot surface.

The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.

Before maintenance work, always disconnect the unit from the power supply.

When unplugging the power cord from the electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord.

Damage to the power cord or plug can lead to an electrocution hazard.

Never leave the product connected to the power source

without supervision.

- Never put the power cable, the plug, or the whole device into water or any other liquid.

- The device should be cleaned regularly, following the recommendations in the cleaning and maintenance section.

- Do not place the device near heat sources, flames, electric heating elements, or hot ovens. Do not place it on any other device.

• The appliance must not be used by children. Keep the appliance and its cord out of the reach of children.

- The appliance may be used by individuals with limited physical, sensory, or mental capabilities, as well as those without knowledge or experience in using similar appliances, provided they are supervised or instructed on safe operation and are aware of potential hazards.

• Extra precautions should be taken when using this device near children or pets. Do not allow children to play with the device.

- Never use the product near combustible materials.

- Never expose the product to weather conditions such as direct sunlight or rain. Never use the product in humid environments (e.g., bathroom or camping trailer).

• Check the power cord periodically for damage.

- If the power cord is damaged, take the product to a professional service center for repair or replacement to prevent hazards.

- Never use the product with a damaged power cord, or if it has been dropped or damaged in any way, or if it does not work properly. Do not attempt to repair the defective product yourself,

as this can lead to electric shock. Always return the damaged device to a professional service for repair.

- All repairs should be performed only by authorized service professionals. Any unauthorized repair attempts may pose a hazard to the user.

- Use only original accessories or those recommended by the manufacturer. Using non-recommended accessories may damage the device and make it unsafe to use.

• Make sure the mincing unit is fastened correctly.

- Avoid overloading the appliance by putting in an excessive amount of food to be minced or by exerting too strong a pressure on it with the pusher into the mincing tube.

- Remove any bones, tendons, cartilage and veins from the meat to be minced.

- Do not mince dry products like poppyseeds. Soak dry products prior to mincing.

- Use only the supplied pusher to push in the food to be minced.

• The accessories are not dishwasher-safe.

- Turn off the appliance and unplug it before replacing any accessories.

CE

Device is compliant with EU directives:

- Low voltage directive (LVD)

- Electromagnetic compatibility (EMC)

Device marked CE mark on rating label

BLAUPUNKT FMM401 - CE - 1

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance In the common waste bin.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

BLAUPUNKT FMM401 - CE - 2

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

Specifications:

Rated power: 500W

Power supply: 220-240V~50-60Hz

Max. continuous operation time: 15 min

Required min. rest time: 30 min

Noise (L) 80dB

Recommended mincing discs: Blaupunkt ACC030

Recommended blade: Blaupunkt ACC029

  1. Body
  2. Mincing-tube-release button
  3. Mincing-tube-locking unit
  4. Power-on button
  5. Securing ring
  6. Rev button
  7. Pusher
  8. Feeder tray
  9. Mincing tube
  10. Screw conveyor
  11. Blade 12, 13, 14. Mincing discs 3, 5 & 7mm

ASSEMBLY

  1. Insert the mincing tube (9) into the locking unit (3). Swivel the neck of the mincing tube clockwise, fit the lugs in place, and lock by swivelling the tube (9) anticlockwise.
  2. Slot the screw conveyor (10) into the mincing tube and fit it into the motor gear.
  3. Attach the blade (11) to the end of the screw conveyor.
  4. Fit the required mincing disc (12-14), fitting the lugs into the grooves.
  5. Tighten the securing ring (15).
  6. Mount the feeder tray (8).

USE

  1. Assemble the Meat Mincer.
  2. Connect the power supply.
  3. Use the Power-on button to start the Mincer.
  4. Feed in the products to be minced by placing them on the feeder tray and moving them with the pusher into the mincing tube. Avoid applying too much pressure on the pusher to allow the screw conveyor to move the products gradually into the mincing tube. Note: if products get stuck inside the mincing tube, turn off the Mincer and use the Rev button to draw the products in the mincing tube back in the opposite direction. If the products are still stuck, turn off the Mincer and unplug it to empty the mincing tube. Note: when using as a sausage-maker attachment, using the Slow button for the lower speed is recommended.

CLEANING AND MAINTENANCE

Make sure the appliance has been disconnected from the power source.

Clean the body (1) with a mildly damp cloth, and then wipe it dry. Do not submerge the body in water or other liquids.

All parts, except for the body (1) with the motor, are suitable for cleaning with water and washing-up liquid.

02-801 Warsaw, Poland

phone: +48 22 331 99 59

e-mail: info@everpol.pl

www.blaupunkt.com

In case of questions or problems

please contact our service.

Tel. 00 48 22 331 99 54

E-mail: sda@blaupunkt.pl

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.

Enjoy it.

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : BLAUPUNKT

Model : FMM401

Category : Slicer