IAN 279109 - Lighting Livarno Lux - Free user manual and instructions

Product Type	LED Desk Lamp
Brand	Livarno Lux
Model	IAN 279109
Item Number	14117501L (taupe), 14117506L (cream)
Operating Voltage	220-240 V ~, 50 Hz
Power Consumption	2.5 W (LED)
Bulb Type	E14, LED, 2.5 W (included)
Protection Class	II
Cable Length	Approx. 1.6 m
Switch	ON/OFF in-line switch
Dimmer Compatible	No
Night Light Use	Not suitable
Proper Use	Indoors, dry and enclosed rooms, private domestic use
Cleaning	Dry, lint-free cloth; do not use water or solvents
Maintenance	Maintenance-free
Warranty	36 months
Safety Note	Do not look directly at light source; not for damp surfaces

Frequently Asked Questions - IAN 279109 Livarno Lux

How do I replace the bulb?

Unplug the lamp, let it cool for 15 minutes, then unscrew the defective bulb anticlockwise and replace with a new 2.5W E14 LED bulb. Use a clean, lint-free cloth.

Can I use a dimmer with this lamp?

No, the lamp is not suitable for dimmers or electronic switches.

What voltage does the lamp require?

The lamp requires 220-240 V ~, 50 Hz.

How should I clean the lamp?

Always unplug before cleaning. Use a dry, lint-free cloth, brush or feather duster. Never use water or solvents.

Can I leave the lamp on unattended?

No, never leave the light unattended while in operation due to fire risk from excessive heat.

Is this lamp suitable as a night light?

No, the lamp is not suitable for use as a night light.

What should I do if the mains lead is damaged?

The external flexi-cable cannot be replaced. If damaged, the lamp must be disposed of to avoid risk of electric shock.

What is the warranty period?

The product comes with a 36-month warranty valid from the date of purchase, covering material and manufacturing defects.

What type of bulb does this lamp use?

An E14 LED bulb with a rated power of 2.5 W is included. Only use this type.

Can I use the lamp in a bathroom?

No, the lamp is designed for indoor use in dry and enclosed rooms. Do not install on damp surfaces.

USER MANUAL IAN 279109 Livarno Lux

Operation and Safety Notes

DE AT CH

LED-TISCHLEUCHTE

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

RO

GB Operation and Safety Notes Page 5

List of pictograms used
	Read instruction manual!		Observe warning and safety notes!
	Volt (AC)		Caution - electric shock! Risk of loss of life!
	Hertz (frequency)		Risk of loss of life by electric shock from damaged mains lead or mains plug!
	Watts (Effective power)		The lamp is not suitable for dimmers or electronic switches.
	Potential of serious to fatal injuries.		Dispose of packaging and appli-ance in an environmentally friendly way!

LED desk lamp

- Introduction

We congratulate you on the purchase of your new device. You have chosen a high quality product. These operating instruc-

tions form a part of this product. They contain important information on safety, use and disposal. Make yourself familiar with all the operating instructions and safety advice for the product before use. Use the product only as described and for the indicated purpose. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it. Check that the correct mains voltage is available and that all the parts have been properly assembled before bringing into use.

Properuse

This lamp is designed for use indoors only, in dry and enclosed rooms. This product is intended for use in a private, domestic environment only. Other uses or modification of the product shall be considered as improper use and could lead to injury or damage. The manufacturer accepts no liability for loss or damage arising from improper use.

Includeditems

Check that all the items and accessories are present and that the lamp is in perfect condition immediately after unpacking.

1 LED table lamp
1 Lamp shade
1 LED bulb (E14, 2.5 W)
1 Set of instructions for use

• Description of parts and features

1 Illuminant
2 Threaded ring
3 Lamp shade
4 Socket
5 Mains lead
6 ON/OFF in-line switch
7 Mains plug

●Technicaldata

Operating voltage: 220–240V\~, 50Hz

Protection class: ☐/II

Bulb: LED, E14/2.5W (included)

Rated power: 1 x 2.5 W

Length of cable: approx. 1.6 m

Model:

14117501L (taupe)

14117506L (cream)

Safety advice

The right to claim under the guarantee shall be rendered invalid in respect of damage caused by the non-observance of these operating instructions! No liability is accepted for consequent damage! No liability is accepted for damage to property or persons caused by improper handling or non-observance of the safety advice!

RISK OF WORNING!

OF LIFE AND ACCIDENT TO INFANTS AND CHILDREN! Never

leave children unsupervised with the packaging materials. Packaging materials present a suffocation hazard. Children often underestimate danger. Always keep the product out of reach of children.

We assume no liability for material damage or personal injury due to improper handling or failure to comply with the safety instructions!

To avoid danger to life from electric shock

Before connecting the lamp to the mains, always check it and the mains lead / plug for any damage. Never use your lamp if you discover that it is damaged in any way.

CAUTION! A damaged mains

lead presents a serious danger to life from electric shock. The external

flexi-cable cannot be replaced, if the cable is damaged then the lamp must be disposed of.

Never let the lamp come into contact with water or other liquids.
Do not install the lamp on damp if conductive surfaces.

Never open any electrical devices such as switches, fittings etc. or allow any object to be inserted into them. This sort of interference can lead to a serious danger to life from electric shock.
■ Touch only the insulated part of the plug when connecting to or disconnecting from the mains supply.
Before installation ensure that the available mains voltage agrees with the operating voltage required for the lamp (220-240 V \~).

To avoid danger of fire and injury

DANGER OF BURNS! Ensure the lamp has been switched off and allowed to cool before you touch it. In this way you will avoid the danger of burns. Light bulbs develop a great deal of heat.

• Replace defective bulbs immediately. Before replacing the bulb, always remove the mains plug from the mains socket.
  Allow the lamp to cool for at least 15 minutes before replacing a defective bulb.
  Do not allow any objects to cover the lamp. Fire can result from the development of too much heat.
  ■ Position the lamp so that it is protected from moisture and dirt.
  ■ Never leave the light unattended whilst in operation. Excessive heat can result in a fire.
  ■ Only use the light bulb indicated.
  Do not look directly into the light source (light bulb, LED etc.).
  ■ This lamp is not suitable for use as a night light.
  ■ The lamp is not suitable for dimmers
  or electronic switches.

Before Initial Use

□ Unscrew the threaded ring 2, turning counterclockwise.
☐ Lift the lamp shade 3 off the socket 4.

Place the lamp shade 3 onto the socket 4 the correct way around.
☐ Tighten the threaded ring 2 clockwise.
☐ Use a clean, lint-free cloth to insert the lamp 1.
□ Screw the lamp 1 clockwise into the socket 4.

Your light is now ready to use.

Operation

• Using the lamp

□ Unwind the mains cable completely before use.
☐ Insert the mains plug into the socket.
☐ Turn the light on and off with the ON/OFF switch 6.

- Replacing a bulb

CAUTION! DANGER TO LIFE BY ELECTRIC SHOCK! Unplug the mains plug 7 from the socket.

☐ Allow the lamp to cool down for 15 minutes before replacing.
☐ Turn the defective light bulb 1 anti-clockwise out of the bulb socket 4.
☐ Use a clean, fluff-free cloth when you are replacing a bulb.
☐ Screw the light bulb 1 clockwise into the light bulb socket 4.

- Cleaning and maintenance

CAUTION! DANGER TO LIFE FROM

ELECTRIC SHOCK! Before cleaning, always pull out the mains plug 7 out of the socket.

Do not use solvents such as petrol and the like as they could damage the lamp.
For electrical safety reasons, never clean the lamp with water or other fluids or immerse it in water.

☐ Only clean with a dry, lint-free cloth, a brush or a feather duster.
☐ The lamp is maintenance-free.

- Disposal

The packaging consists entirely of environmentally friendly materials. They can be disposed of at your local recycling

facility.

The symbol of the wheelie bin with a cross through It means that, in the European Union, the product has to be

disposed of in a separate refuse collection. This applies to the product and to all components bearing this symbol. Products marked in this way may not be disposed of with normal domestic waste but have to be handed in at a recycling collection point for electrical and electronic appliances. Recycling helps to reduce the consumption of raw materials and to ease the burden on the environment.

● Warranty and Service

WarrantyDeclaration

You receive a 36 month warranty on this product, valid from the date of purchase.

The device has been carefully produced under strict quality control.

Within the warranty period we shall rectify without charge all material and manufacturing defects. In the event of a defect arising during the warranty period, please send the device to the listed Service Centre address, making reference to the following article number: 14117501L/14117506L.

Wear parts (such as bulbs) and damage caused by improper handling, non-observance of the operating instructions or unauthorised interference are excluded from the warranty.

The performance of services under the warranty does not extend or renew the warranty period.

Serviceaddress

Please have your receipt and the product number (e.g. IAN 12345) available for all queries as proof of purchase.

- Declaration of conformity CE

This product fulfils the requirements of the applicable European and national directives. Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.

Manufacturer

59929 Brilon (Germany)

Last Information Update