SK2020 - Kitchen scale BLACK & DECKER - Free user manual and instructions

Product Type	Kitchen Scale
Brand	Black & Decker
Model	SK2020
Capacity	3 kg
Power Source	1 x CR2032 battery
Auto Shut-Off	After approx. 60 seconds
Tare Function	Yes
Weighing Units	Grams (g) and Ounces (oz)
Display Type	Digital LCD
Overload Indication	Shows "o-Ld"
Low Battery Indication	Shows "Lo"
Operating Temperature Range	10°C to 30°C
Cleaning Method	Mild soap and damp cloth; do not immerse
Safety Features	Overload protection, do not use near heat
Intended Use	Household only
Warranty	24 months from purchase date

Frequently Asked Questions - SK2020 BLACK & DECKER

How do I turn the scale on and off?

Press the On/Off button (1) to switch on. Press again to switch off; hold until the display goes blank. The scale also has an auto shut-off after about 60 seconds of inactivity.

How do I change the weighing unit?

With the scale on, press the weighing unit button (2) to toggle between grams (g) and ounces (oz). You can change units at any time while weighing.

What is the tare function and how do I use it?

The tare function zeros the display. Press the tare button (1) to reset to zero. For example, place an empty bowl on the scale, press tare, then add ingredients to weigh only the contents.

What does 'o-Ld' on the display mean?

'o-Ld' indicates the weight exceeds the maximum capacity of 3 kg. Remove the weight immediately to prevent damage.

What does 'Lo' on the display mean?

'Lo' means the battery is low and needs to be replaced. Open the battery compartment and insert a new CR2032 battery.

How do I clean the scale?

Use only mild soap and a damp cloth. Do not use abrasive or solvent-based cleaners. Never immerse any part of the scale in water or other liquids.

What type of battery does the scale use and how do I replace it?

It uses one CR2032 battery. Open the battery compartment, remove the old battery, and insert a new one matching the (+) and (-) terminals. Dispose of old batteries properly.

Does the scale have an auto shut-off feature?

Yes, the scale automatically switches off after approximately 60 seconds of inactivity to save battery.

What is the warranty period for this scale?

Black & Decker provides a 24-month warranty from the date of purchase against defects in materials or workmanship. Proof of purchase is required for claims.

Where can I get my scale repaired?

Contact an authorized Black & Decker repair agent. Visit www.2helpU.com to find the nearest agent or check the local Black & Decker office. Do not attempt repairs yourself beyond battery replacement.

USER MANUAL SK2020 BLACK & DECKER

Your Black & Decker kitchen scale have been designed for weighing food and food products. This product is intended for household use only.

Important safeguards

Warning! When using battery-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, leaking batteries, personal injury and material damage.

◆ Read this entire manual carefully before using the appliance.
- The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of material damage.
◆ Retain this manual for future reference.

Using your appliance

• Do not place the appliance on or near heat sources.
  ◆ Do not use the appliance near flammable materials.
  ◆ Do not use the appliance outdoors.
• Always protect the appliance from water or excessive humidity.
  ◆ Do not overload the appliance.
• Do not use the appliance at ambient temperatures below 10 °C or above 30 °C.

Safety of others

- Do not allow children or any person unfamiliar with these instructions to use the appliance.

After use

• Remove the batteries when the appliance is not going to be used for a longer period of time.
• When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances.

Inspection and repairs

• Before use, check the appliance for damaged or defective parts. Check for breakage of parts and any other conditions that may affect its operation.
• Do not use the appliance if any part is damaged or defective.
• Have any damaged or defective parts repaired or replaced by an authorised repair agent.
• Never attempt to remove or replace any parts other than those specified in this manual.

Electrical safety

Warning! To avoid the risk of short circuiting, do not immerse the appliance or the batteries in water or other liquid.

◆ Use only the correct type of battery for the appliance (see technical data).

• Never attempt to charge non-rechargeable batteries.
• The electronic components inside the appliance may be affected by other devices used in close proximity, such as mobile phones or microwave ovens. If this happens, the display will show erroneous data. To remedy this, either switch the interfering device off, or move the appliance away from it.

Overview

This appliance includes some or all of the following features.

1. On/off button - Tare button
2. Weighing unit button
3. Display
4. Platform

Use

Switching on and off

◆ Press the on/off button (1) to switch the appliance on.
◆ Press the on/off button again to switch the appliance off. Hold the button until the display goes blank.
In addition, the appliance is fitted with an auto shut-off function, which automatically switches off the appliance after approximately 60 seconds.

Setting the tare weight

◆ Switch the appliance on as described previously.
- Press the tare button (1) to set the reading on the display (3) to zero.
When using a bowl, first put the empty bowl on the scale and press the tare button to set the reading on the display to zero.

Setting the weighing unit

The weighing unit can be set to grams (g) or ounces (oz).

• With the appliance turned on, press the weighing unit button (2) until the desired units are shown in the display.
• The weighing unit can be changed at any time while weighing.

Weighing

◆ Place the scale on a flat surface.
◆ Place the product to be weighed on the scale and read off the weight in the display (3).
When using a bowl, first correct the tare as described above. Put the product to be weighed in the bowl, place the bowl on the scale and read off the weight.
- If the weight exceeds the maximum capacity, the display will show "o-Ld". To prevent damage to the appliance, immediately remove the weight from the scale.

Cleaning, maintenance and storage

Warning! Before cleaning or maintenance, switch the appliance off.

◆ To clean the appliance, use only mild soap and a damp cloth.
◆ Do not use any abrasive or solvent-based cleaner.

Warning! Do not immerse any part of the appliance in water or any other liquid.

Checking and replacing the batteries

• If the display (3) shows "Lo", the batteries are too low and must be replaced.
• Periodically open the battery compartment and check the batteries for corrosion.
  ◆ Insert 1 new CR2032 battery, make sure to match the (+) positive and the (-) negative terminals correctly.
• When disposing of batteries, follow the instructions given in the section "Protecting the environment".

Protecting the environment

Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com

Batteries

At the end of their useful life, discard batteries with due care for our environment. Take them to any authorised repair agent or a local recycling station.

Technical data

SK2020 Type 1

Capacity kg 3

Batteries 1 x CR2032

EC declaration of conformity

SK2020

Black & Decker declares that these products conform to: EN61000

The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of Black & Decker.

Kevin Hewitt

Director of Consumer Engineering

Spennymoor, County Durham DL16 6JG,

United Kingdom

22/10/2010

Guarantee

Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.

If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless:

• The product has been used for trade, professional or hire purposes;
  ◆ The product has been subjected to misuse or neglect;
• The product has sustained damage through foreign objects, substances or accidents;
  ◆ Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff.

To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com

Please register at our website www.blackanddecker.co.uk to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www.blackanddecker.co.uk

Uso previsto

Spennymoor, County Durham DL16 6JG,

Regno Unito

22/10/2010

Garanzia

Kevin Hewitt

Do not forget to register your product!

www.blackanddecker.co.uk/productregistration

Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country

DEUTSCH

www.blackanddecker.it/productregistration

www.blackanddecker.nl/productregistration

www.blackanddecker.es/productregistration

www.blackanddecker.pt/productregistration