IAN 64100 - Wardrobe Livarno Lux - Free user manual and instructions

Product Type	Bedside Table with 3 Drawers
Brand	Livarno Lux
Model Number	IAN 64100
Dimensions (W x H x D)	42 x 60 x 34 cm
Material	MDF and Chipboard
Max Load on Top Panel	20 kg
Max Load per Drawer	10 kg
Number of Drawers	3
Assembly Required	Yes, with wall mounting
Recommended Tools	Electric drill (6 mm bit) and screwdriver
Care Instructions	Clean with dry or damp non-fluff cloth; avoid abrasive cleaners
Safety Warnings	Risk of tipping; do not let children climb; attach to wall; avoid heat sources
Intended Use	Indoor, dry area for storing small and lightweight objects
Included Accessories	Wooden dowels, cam pins, cam connectors, drawer handles, screws, back panel restraints, caps
Warranty	Not specified; contact service hotline

Frequently Asked Questions - IAN 64100 Livarno Lux

What is the recommended method for cleaning the Livarno Lux wardrobe?

Use a dry, non-fluff cloth for regular cleaning. For stubborn dirt, slightly dampen the cloth with water and a mild cleaning agent. Avoid abrasive or corrosive cleaners.

What maximum weight can I place on the top panel?

The maximum load on the top panel is 20 kg. Do not exceed this limit to prevent injury or product damage.

How much weight can each drawer hold?

Each drawer can hold up to 10 kg. Distribute items evenly to maintain balance.

Is wall mounting required for this bedside table?

Yes, the product requires wall mounting for safety to prevent tipping. Use suitable fixing materials for your wall type (e.g., solid masonry). Drill with a 6 mm bit.

What tools are needed for assembly?

You will need an electric drill with a 6 mm diameter drill bit and a screwdriver. Refer to your drill's operating instructions before use.

Are there any fire hazards associated with this wardrobe?

Do not place the product near open flames or radiant heaters to reduce fire risk.

How can I prevent injury from drawers?

Keep fingers away from the gap between drawers and the carcass when opening or closing. Risk of shearing or crushing injury.

What should I do if I lose a part during assembly?

Check the supply scope list to confirm all parts are present. If any part is missing, do not assemble and contact the service hotline (UK: 0871 5000 720, Malta: 80062230).

Can I use this product in a bathroom or outdoor area?

No, the product is designed for indoor, dry areas only. Moisture may damage the MDF and chipboard.

How do I dispose of the product at the end of its life?

The packaging is recyclable. For the product itself, contact your local waste disposal authority for proper disposal guidelines.

USER MANUAL IAN 64100 Livarno Lux

$$ (L \times A \times P) $$

Material: MDF, placas de aglomerado

Capacidade

Before assembling and using the product for the first time, take time to familiarise yourself with the product first. Read the following assembly instructions and safety instructions carefully. Only use the product as described and for the designated areas of application. Please keep these instructions in a safe place. If you hand this product on to a third party, you must also pass on all documents relating to the product.

- Proper Use

The product is suitable for storing and keeping safe small and lightweight objects. It is designed for use in private, dry, indoor areas. Any use other than previously mentioned or any product modification is prohibited and can lead to injuries and / or product damage. The manufacturer is not liable for any damages caused by any use other than for the intended purpose. The product is not intended for commercial use.

● Description of parts and features

1 Top panel
2 Right side panel
3 Trim
4 Bottom connection piece
5 Back panel
6 Left side panel
7 Top connection piece
8 Back / sides (drawer), preassembled component
9 Bottom (drawer)
10 Front (drawer)
11 Wooden dowel (approx. ø 7.8 x 30 mm)
12 Cam pin (approx. ø 6 x 36 mm)
13 Cam connector (approx. 15 x 12 mm)
14 Drawer handle
15 Cross-head screw (approx. ∅ 4 x 20 mm)

16 Metal drawer runner
17 Cross-head screw (approx. ø 4 x 10 mm)
18 Dowel (approx. ø 6 x 30 mm)
19 Cross-head screw (approx. ∅ 3.5 x 40 mm)
20 Wooden dowel (approx. ∅ 5.8 x 30 mm)
21 Cam pin (approx. ø 6 x 25 mm)
22 Cam connector (approx. ø 12 x 10 mm)
23 Cam pin (approx. ø 6 x 36 mm)
24 Cross-head screw (approx. ∅ 4 x 9 mm)
25 Back panel restraint
26 Cross-head screw (approx. ∅ 2.5 x 16 mm)
27 Cap

Supply Scope

Immediately after unpacking, check that the delivery is complete and that the product and all its parts are in perfect condition. Do not under any circumstances assemble the product if the delivery is incomplete.

1 Top panel
1 Right side panel
1 Trim
1 Bottom connection piece
1 Back panel
1 Left side panel
1 Top connection piece
3 Back / sides (drawer), preassembled components
3 Bottoms (drawer)
3 Fronts (drawer)
13 Wooden dowels (approx. ø 7.8 x 30 mm)
6 Cam pins (approx. ø 6 x 36 mm)
8 Cam connectors (approx. ø 15 x 12 mm)
3 Drawer handles
3 Cross-head screws (approx. ø 4 x 20 mm)
6 Metal drawer runners
18 Cross-head screws (approx. ø 4 x 10 mm)
2 Dowels (approx. ø 6 x 30 mm)
2 Cross-head screws (approx. ø 3.5 x 40 mm)
12 Wooden dowels (approx. ø 5.8 x 30 mm)
6 Cam pins (approx. ø 6 x 25 mm)
6 Cam connectors (approx. ø 12 x 10 mm)
2 Cam pins (approx. ø 6 x 36 mm)
6 Cross-head screws (approx. ø 4 x 9 mm)
4 Back panel restraints
4 Cross-head screws (approx. ø 2.5 x 16 mm)

12 GB/MT

LIVARNO

Introduction / Safety advice / Assembly

6 Caps

1 Assembly instructions

- Technical data

Dimensions: approx. 42 x 60 x 34 cm (W x H x D)

Material: MDF, chipboard

Max. load: 20 kg for top panel

10 kg per drawer

Safety advice

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

WARNING! RISK OF LOSS OF LIFE OR ACCIDENT TO INFANTS AND CHILDREN! Never

leave children unsupervised with the pa materials. Danger of suffocation. This product is not a toy!

CAUTION! RISK OF INJURY! Make sure that all parts are undamaged and assembled correctly. Improper assembly carries a risk of injury. Damaged parts may affect the safety and function of the product.

CAUTION! Do not leave children unsupervised! The product is not a climbing frame or a toy! Make sure that nobody, especially a child, climbs on or leans against the product. The wall fastenings could be torn out of the wall and the product could tip over, resulting in injury or damage.

DANGER OF ELECTRIC SHOCK! DANGER OF DAMAGE TO PROPERTY! DANGER OF IN-

JURY! Ensure that you do not strike elec cables, gas or water pipes when you are drilling into the wall. If necessary, check the wall using a suitable detector before you drill.

Examine the wall before installation and choose 6 mm diameter drill bit and a screwdriver. Refer to suitable installation fixings. We have supplied the operating instructions for your electric drill be-fixings suitable for an ordinary solid masonry wall. before assembly.

CAUTION! FIRE HAZARD! Do not position the product near an open fire and/or radiant heaters.
■ Make sure that this product is standing on a solid, level surface.
- Distribute weight upon this products' surface evenly so that it cannot overturn.
■ Regularly check the stability of all connections and retighten the screws.
- Keep the product away from water and moisture. Otherwise the product may be damaged.
The safety of the product can only be ensured if it is properly assembled and all connections are made securely.
- Check the stability of the product before you use it.

CAUTION! Do not lift or move the product if it is supporting any object.

CAUTION! RISK OF SHEARING OR CRUSHING INJURY!

Please ensure that your fingers do

not get themselves between the drawers and the carcass when you are opening or closing the drawers.

Do not exceed the allowable maximum loads on the top panel (20 kg) or the drawers (10 kg each). Failure to observe this advice may lead to injury and/or damage to the product.

- Assembly

Note: Assemble the product on a scratch-resistant floor that is sufficiently large. You may have to put a blanket or the like down in order to avoid damaging the product.

Note: This product requires wall mounting. Make sure that you position the mounting material at the right height. Otherwise you will not be able to mount the product correctly.

Note: Assembly requires an electric drill with a 6 mm diameter drill bit and a screwdriver. Refer to the operating instructions for your electric drill before assembly.

LIVARNO

13 GB/MT

Assembly/Cleaning and Care/Service/Disposal

☐ Assemble the product in accordance with Figs. A to I.

Note: Regularly check the stability of all connections and retighten the screws regularly.

Product description:

Bedside Table

Model No.: Z30846

Version: 07/2011

- Cleaning and Care

Do not under any circumstances use corrosive or abrasive cleaning agents. These may damage the product.
□ Clean the product with a dry, non-fluffing cloth.
☐ To remove more stubborn dirt, use a damp cloth and, if necessary, a mild cleaning agent.

- Service

GB

Service Great Britain

Tel.: [phone]

(0,10 GBP/Min.)

e-mail: [e-mail]

IAN 64100

MT

Service Malta

Tel.: [phone]

e-mail: [e-mail]

IAN 64100

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

14 GB/MT

LIVARNO

Einleitung

Beistellkommode

Einleitung

FAHR EINES SACHSCHADENS!

Simple line drawings of a hammer and a pencil, no text or symbols present

Necesita · Vi servono · Necessita de · You need · Sie benötigen:

graph TD
    A["1 × 1"] --> B["Box with four dots"]
    B --> C["..."]
    style A fill:#fff,stroke:#000
    style B fill:#fff,stroke:#000
    style C fill:#fff,stroke:#000

(aprox./ca. ø 7,8 x 30 mm)

(aprox./ca. ø 6 x 36 mm)

(aprox./ca. 15 x 12 mm)

[Non-Text]

(aprox./ca. 4 x 20 mm)

(aprox./ca. ø 4 x 10 mm)

(aprox./ca. ø 6 x 30 mm)

(aprox./ca. ø 3,5 x 40 mm)

(aprox./ca. ø 5,8 x 30 mm)

(aprox./ca.ø 6 x 25 mm)

(aprox./ca. ø 12 x 10 mm)

(aprox./ca. ø 6 x 36 mm)

3x

H

|

Line drawing of a single drawer cabinet with three drawers and a top shelf (no text or symbols)