ZHF5000 - Iron Zephir - Free user manual and instructions

Product Type	Steam Iron with Separate Boiler
Brand	Zephir
Model	ZHF5000
Power Consumption	2000 W
Voltage	220-240 V ~ 50/60 Hz
Water Tank Capacity	0.2 - 0.5 L
Steam Output	Continuous steam (adjustable)
Soleplate Material	Stainless steel
Cord Length	2 m
Weight	1.5 kg
Dimensions (approx.)	30 x 15 x 25 cm
Functions	Steam ironing, dry ironing, temperature control
Controls	Boiler on/off, iron on/off, temperature knob, steam button
Indicators	Boiler pilot light, iron operating light
Safety Features	Safety cap, overheating protection, earthed plug
Maintenance	Empty boiler after use, descale regularly
Accessories Included	Funnel
Usage	Household only

Frequently Asked Questions - ZHF5000 Zephir

How do I fill the boiler with water?

Unplug the appliance. Unscrew the safety cap anticlockwise and remove it. Use the funnel to pour water (min 0.2 L, max 0.5 L). Screw the cap back tightly.

Can I use tap water?

Yes, normal tap water or distilled water is recommended. Avoid hard water to prevent lime buildup.

How do I generate steam?

Turn on the boiler switch (1) and the iron switch (2). Wait for the boiler indicator light to turn on, then press the steam button on the iron.

What temperature should I select for different fabrics?

Follow the fabric label. Start with low temperature for synthetics, then silk, wool, cotton, and linen. Use steam for wool and cotton.

How do I refill the boiler during use?

Turn off the boiler, unplug, and wait 5 minutes for cooling. Slowly unscrew the cap to release residual steam, then fill with water up to 0.5 L.

Why is the iron not producing steam?

Ensure the boiler is switched on and the indicator light is on. Check that the soleplate is hot enough. Also verify the water tank is not empty.

How do I clean the appliance?

Unplug and let cool. Empty the boiler and rinse with water to remove lime deposits. Wipe the enclosure with a damp cloth. Do not use solvents.

What safety precautions should I take?

Always unplug before filling or cleaning. Do not leave unattended while connected. Keep out of reach of children. Use on a stable surface.

Can I use the iron without steam?

Yes, you can use it as a dry iron by not turning on the boiler switch. Set the iron temperature as needed.

What should I do if the appliance is not working?

Check power connection and voltage. If the safety fuse blows, contact an authorized service center. Do not attempt to repair yourself.

USER MANUAL ZHF5000 Zephir

Exterior view of a steam iron with wooden handle and black frame (no text or symbols visible)

MANUALE D'ISTRUZIONI

Illustration of a steam iron with labeled parts (no text or symbols on the iron itself)

1. Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents.

2. Let other potential users read these instructions. Keep these instructions for future use.

3. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.

4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

5. Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label. The appliance can be damaged if the voltage is not correct.

6. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

7. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

8. Keep the appliance and its cord out of reach of children less than 8 years.

9. The iron must not be left unattended while it is connected to the main supply.

10. Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label. The appliance can be damaged if the voltage is not correct.

11. After removing the packing materials, check the integrity of the appliance; if You are unsure, do not use it and ask for professional help. The packing materials (plastic bags, polystyrene foams, nails, etc) must be kept out the reach of children because they are potential source of danger.

12. Remove the plug from the socket before filling the appliance with water or before pouring out the remaining water after use.

13. The appliance must be used and placed on a stable surface.

14. When placed on its stand, make sure that the surface on which the stand is placed is stable.

15. The iron should not be used if it has been dropped, if there are visible signs of damage or if it is leakingwater. It must be checked by an authorized Technical Service Centre before it can be used again.

16. With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e.g. replacing a faulty mains cable, must only be carried out by qualified personnel from an Authorized Technical Service Centre.

17. This appliance must be connected to an earthed socket.

18. Do not use extension cables, flying socket and damaged cables.

19. If the safety fuse fitted in the appliance blows, the appliance will be rendered inoperative. To restore normal operation the appliance will have to be taken to an authorized Technical Service Center.

20. The iron must not be left unattended while it is connected to the supply mains;

21. The plug must be removed from the socket-outlet before the water reservoir is filled with water

22. The filling aperture must not be opened during use.

WARNING: This symbol means:: hot surface in normal use.

1. If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.

2. The use adaptors multiple plugs and/or extensions is not recommended.

3. Do not use the appliance if the cable or the plug shows any damages.

4. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.

5. This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous.

6. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.

7. This appliance is for HOUSEHOLD USE ONLY.

8. Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

9. Before cleaning and maintenance disconnect the unit from the power supply.

10. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.

11. Do not use the appliance near explosives, highly flammable materials, gases or burning flames.

12. Do not allow children or disabled people to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.

13. Do not hold the appliance with wet hands or feet.

14. The use of accessory attachments not recommended by the appliance manufacturer may cause hazard or injury.

15. Do not use the appliance near the bath, the shower, the wash-basin or anywhere water can turn out to be a source of danger.

16. Do not pull the mains cable or the appliance itself when disconnecting the plug from the socket.

17. Do not let cord hang over edge of table, or touch hot surface.

18. Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail.

19. Do not use outdoors.

20. Pull out the plug from the mains socket when the appliance is not used or when cleaning it. Allow to cool before cleaning.

21. If you decide not to use the appliance any longer, make it unserviceable by simply cutting the supply cable after disconnecting the plug from the socket. Also make any dangerous parts unserviceable, especially for children who could play whit the appliance.

22. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

23. .If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.

24. Do not use the appliance if the cable or the plug shows any damages.

25. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.

26. This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous.

27. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use. This appliance is for HOUSEHOLD USE ONLY.

28. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.

29. Do not use the appliance near explosives, highly flammable materials, gases or burning flames.

30. Do not allow children or disabled people to use the appliance if they are not properly watched over.

31. Close supervision is necessary when any appliance used by or near children.

32. Do not hold the appliance with wet hands or feet.

33. The use of accessory attachments not recommended by the appliance manufacturer may cause hazard or injury.

34. Do not use the appliance near the bath, the shower, the wash-basin or anywhere water can turn out to be a source of danger.

35. Do not pull the mains cable or the appliance itself when disconnecting the plug from the socket..

36. The iron must be used and rested on a stable surface, when placing the iron on its stand, ensure that the surface on which the stand is placed is stable and plane.

37. The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.

38. In the event of any abnormal situations immediately turn off the power and contact your dealer or service center.

39. Do not use this unit connected to programmers, external timer, separate remote control system, timer or any other device that can switch automatically

40. Do not use power sockets loose or damaged cables.

41. Hold the plug firmly when you pull it out from power supply to avoid electric shock, short circuit or fire

42. Move the plug from the socket before filling the boiler with water, or when you don't use the machine.

43. Never obstruct the sole plate steam holes of the iron.

44. Never direct the steam jet towards persons, pets or sources of electricity such as electrical outlets, electrical appliances in operation, light fixtures.

45. Never work with wet hands.

46. Always make sure that the materials or the surfaces to be ironed are suitable for the steam ironing e always select the right temperature.

47. Follow the manufacturer instructions about the ironing of materials. If no information is available, make always a trial on a little visible point of the material. Should any damage appear, don't use the steam iron.

48. Do not put any detergents or chemical substances into the boiler.

49. During the operation never put the iron plate on the power cord.

50. When in use, never overturn the appliance for any reason.
51. Do not unscrew the boiler cap or add water when the appliance is in operation.
52. Do not leave the appliance unattended or running unnecessarily, especially when the tank is empty as this could result in damage to the appliance.
53. Always screw on the boiler cap tightly to avoid pressure loss.

DESCRIPTION

1. Boiler turning on/off button
2. Iron turning on/off button
3. Led boiler indicator
4. Safety cap
5. Iron operating light indicator

STARTING THE APPLIANCE

Filling with water

Caution! Before filling the boiler with water, unplug the machine.

• Fill the steam ironing system only with normal tap water or with distilled water. Lime could cause overheating and the obstruction of steam holes with consequent damages to the appliance.
• The steam ironing system must rest on a flat surface.
  • Turn the cap (4) anticlockwise, unscrew it completely and remove it.
  • Empty the boiler of the possible remaining water. Pour water inside only when the boiler is empty.
• Put a funnel in the filling hole.
• Pour an adequate water quantity (when the boiler is empty min. 0.2 l - max 0.5 l) into the boiler. ATTENTION: Don't pour more than 500cc (0,5 l.) of water. Never exceed this quantity
• Remove the funnel.
• Put the cap (4) back in its place: turn it clockwise till it is completely screwed. Caution! Make sure that the machine is closed properly.

Connecting the steam ironing system - Caution!

• Connect the machine only if the mains voltage corresponds to the rated voltage reported on the rating plate.
  • The power cord and the steam tube between the boiler and the iron must not be damaged.
• The water tank must be filled with a sufficient water quantity (when the boiler is empty min. 0.2 l - max 0.5 l).
• The steam ejection must not be obstructed.
• Push the heating boiler on/off switch (1); the switch will light up (this operation is not necessary if you want to use the steam ironing system as a dry iron).
  • The machine is in operation. Water is heated and steam is generated.
• When the steam is ready, the pilot light (3) is on; wait for the iron to be hot and ready too (read the following instructions).
• The indication light will be on and off from time to time indicating that the selected temperature is being maintained.

Connecting the iron

• When the appliance is connected, push the iron on/off switch (switch 2); the switch and the pilot light on the iron will light up.
• Set the iron temperature knob according to the type of cloth.

- You can begin steam ironing when the pilot light on the iron is off and when the pilot light (3) on the steam system is on. You can press the button on the top of the steam iron to deliver steam.

Pour more water into the boiler

Caution! When the appliance is working and before the boiler has cooled down, don't open the boiler cap(4)! To refill the boiled please proceed as follows:

• Switch the boiler off (1).
  • Pull out the plug and wait at least 5 minutes to let the boiler cool down.
• Turn the cap (4) slowly 2-3 times anticlockwise, and let the remaining steam come out of the boiler. Then unscrew the cap completely and remove it.
  • Empty the boiler of the possible remaining water. Pour water inside only when the boiler is empty.
• Put a funnel in the filling hole and pour water into the boiler. ATTENTION: Don't pour more than 500cc (0,5 l.) of water. Never exceed this quantity!
• Remove the funnel.
• Put the cap (4) back in its place: turn it clockwise till it is completely screwed.

Disconnecting the steam ironing system

Caution! The steam ironing system is off and safe only after you follow this instructions:

Disconnect the boiler heating switch (1) and the iron heating switch (2). Pull out the plug and let the steam ironing system cool down.

IRONING TEMPERATURE

• Always check first to see whether a label with ironing instructions is attached to the article to be ironed. Follow these ironing instructions in all cases.
• Sort the laundry out according to ironing temperature first: wool with wool, cotton with cotton, etc.
• Start ironing the fabrics requiring the lowest temperature and progress to the higher ones because the iron heats up quicker than it cools down.
• If the fabric consists of various kinds of fibres (e.g. cotton with polyester), you must always select the lowest ironing temperature of the composition of those fibres.
• If you do not know what kind(s) of fabric(s) the article has been made of, find a spot which will be invisible when wearing or using the article. Try out the ironing temperature which is most suitable there (start at a relatively low temperature).
• Pure woollen fabrics (100% wool) may be pressed with the iron set to a steam position. Preferably set the steam control to maximum position and use a dry pressing cloth.
• When steam-ironing woollen fabrics, shining of the fabric may occur. This can be prevented by turning the article inside out and ironing the reverse side.
• Velvet and other textures which rapidly acquire shiny spots should be ironed in one direction only (with the nap) applying light pressure.
  • Always keep the iron moving.
• Silk and other fabrics likely to become shiny should be ironed on the reverse side.
  • To prevent staining do not use the spray on silk or other delicate fabrics.

CLEANING AND MAINTENANCE

Caution! Before any maintenance or cleaning, unplug the machine and let the boiler cool down.

- Pour in the boiler some water and rinse out to remove eventual limestone residues. Repeat it also after a long period of inactivity.

• Always empty the boiler. The remaining water in the boiler may build up lime deposits.

- Clean the machine enclosure with a wet cloth.

- Don't use any solvents, they may damage the machine plastic components.

	On label means:This article cannot be ironed! (e.g. chlorofibre, elastodiene)
Label	Kind of textile	Fibre material	Temperature knob position
	synthetic	acrylic modacryl polypropylene polyurethane
	synthetic	acetate triacetate
	synthetic	metallized cupro polyamide (nylon) polyester modal viscose (rayon)
	silk	silk
	wool	wool	(steam or dry)
	cotton	cotton
	linen	linen

www.uniorservice.com

WESTIM S.p.A.

Via Roberto Bracco 42/E

00137, Roma

Tel. [phone]

Italiano

Disposal of old electrical & electronic equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or in its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Français