TRENDNET TV-IP100W - Surveillance Camera

TV-IP100W - Surveillance Camera TRENDNET - Free user manual and instructions

Find the device manual for free TV-IP100W TRENDNET in PDF.

📄 13 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice TRENDNET TV-IP100W - page 9
9 / 13
View the manual : Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Wireless Internet Camera
Brand TRENDnet
Model TV-IP100W
Wireless Standard 802.11b/g (inferred)
Network Interface Ethernet (RJ-45)
Image Sensor CMOS (typical)
Lens Fixed, manual focus adjustment
Power Supply DC power adapter (included)
Mounting Base mount included
Viewing Method Web browser (Internet Explorer or Netscape) with ActiveX
Configuration Web-based interface, fixed IP or DHCP
Default IP Address 192.168.0.20
Supported Operating Systems Windows 98/ME/2000/XP
Wireless Security WEP (inferred from authentication options)
Included Accessories CD-ROM, power adapter, mounting base, antenna (integrated)
Certifications FCC, CE
Technical Support US/Canada: 1-310-626-6252; Europe: various numbers

Frequently Asked Questions - TV-IP100W TRENDNET

How do I fix a blurry image?
You can adjust the focus by rotating the lens on the camera.
Can I replace the camera lens?
No, the lens is fixed and not replaceable.
How do I view live images on my local network?
Open a web browser and type the camera's IP address (e.g., 192.168.0.20) in the address bar.
Why doesn't the image load when I enter the IP address?
Ensure ActiveX controls are enabled in Internet Explorer: go to Tools > Internet Options > Security > Custom Level and enable all ActiveX options.
How do I configure my computer's IP address for the camera?
For Windows 2000/XP: right-click My Network Places > Properties > Local Area Connection > Properties > Internet Protocol (TCP/IP) > Properties > select 'Use the following IP address' and enter an IP like 192.168.0.51 with subnet mask 255.255.255.0.
What is the default IP address of the camera?
The default IP address is 192.168.0.20.
How do I reset the camera to factory defaults?
Press and hold the reset button (if available) for 10 seconds. Refer to the user guide for exact location.
Can I use the camera without a wireless network?
Yes, you can connect via Ethernet cable to your router or switch.
What web browsers are supported?
The camera is designed for Internet Explorer and Netscape with ActiveX enabled.
Where can I find the full user manual?
The manual is included on the CD-ROM or available for download at www.TRENDnet.com.

User questions about TV-IP100W TRENDNET

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Surveillance Camera in PDF format for free! Find your manual TV-IP100W - TRENDNET and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TV-IP100W by TRENDNET.

USER MANUAL TV-IP100W TRENDNET

natural_image Blue wireless camera with antenna and black body (no visible text or symbols)

TRENDnet

TRENDware, USA What's Next in Networking

Table of Contents

Deutsch 1

natural_image Illustration of a blue TV-IP100W device with antenna and base mount (no text or symbols on the device itself)

Programm-CD

TRENDNET TV-IP100W - Deutsch 1 - 2

natural_image Black Stromadapter charger with coiled cable (no text or symbols on device)

Address http://192.168.0.20/to Welcome to the Internet Camera • Get home, Andred Make • Create new, New Style • Download/Downloaded

natural_image Close-up of a blue wireless router with black antennas and red directional arrows pointing to ports (no text or symbols visible)

Q1. The image is blurry, how do I fix this?

A1. You can adjust the Internet Camera's focus by rotating the lens.

Q2. Can I replace the camera lens?

A2. No. It cannot be replaced.

Q3. How do I view the Internet Camera's live images within my Local Network?

A3. Open a web browser (Internet Explorer or Netscape), type your Wireless Internet Camera's IP address (i.e.: 192.168.0.20) in the Address bar, and then hit the Enter key. The Welcome page of the Internet Camera will appear.

Q4. When I enter the IP address of the camera, the image does not load, why?

A4. Please make sure all the Active X features are enabled for your Internet Explorer.

  1. Go to Tool (on the Tool bar) > Internet options > Security

General Security Privacy Content Conn Internet Options General Security Privacy Content Connections Programs Advanced Select a Web content gone to specify its security settings. Internet Local Intranet Trusted sites Restricted sites Internet This zone contains all Web sites you haven't placed in other zones Security level for this zone Custom Custom settings: To change the settings, click Custom Level. To use the recommended settings, click Default Level. Custom Level Default Level OK Cancel Help

  1. Click on Custom Level and make sure all ActiveX controls are set to "Enable" and click OK.

Security Settings Settings: ActiveX controls and plugins Download signed ActiveX controls Disable Enable Prompt Download unsigned ActiveX controls Disable Enable Prompt Initimize and script ActiveX controls not marked as safe Disable Enable Prompt Pure ActiveX controls and plugins Reset custom settings Reset to: Medium Reset OK Cancel

  1. Once you save the settings, the browser will load again and the image should appear.

Q5. How do I configure my computer's IP address?

A5. For Windows 2000/XP users:

  • On the Desktop, right click on My Network Places > select Properties > right click on the Local Area Connection > select Properties, the Local Area Connection Properties Window will appear

  • Under General tab, select Internet Protocol (TCP/IP) > click on Properties button, Internet Protocol (TCP/IP) Properties Window will appear

  • Select Use the following IP address option and enter the IP, Subnet Mask and Default gateway addresses.

  • Click OK to complete

Internet Protocol (TCP/IP) Properties General! You can get IP settings assigned automatically if your network supports this capability. Otherwise, you need to ask your network administrator for the appropriate IP settings. Obtain an IP address automatically Use the following IP address: Obtain an IP address automatically Use the following IP address: IP address: 192, 168, 0, 51 Subnet mask: 255, 255, 255, 0 Default gateway: Obtain DNS server address automatically Use the following DNS server addresses: Deferred DNS server: 192, 168, 61, 1 Alternate DNS server: Advanced... OK Cancel

For Windows 98/ME users:

  • On the Desktop, right click on Network Neighborhood > select Properties > right click on the Local Area Connection > select Properties, the Local Area Connection Properties Window will appear

  • Under Configuration tab, select your Network Adapter (TCP/IP protocol) > click on Properties button, TCP/IP Protocol Properties Window will appear

  • Select Specify an IP address option and enter the IP, Subnet Mask addresses.

Specify an IP address JP Address: 192.168.0 .51 Subnet Mask: 255.255.255.0 TCP/IP Properties Bindings Advanced NAVIOS DNS Configuration Gateway WINS Configuration IP Address An IP address can be automatically assigned to this computer. If your network does not automatically assign IP addresses, ask your network administrator for an address, and then type it in the space below. Obtain an IP address automatically Specify an IP address IP Address: 192.168.0 .51 Subnet Mask: 255.255.255.0 OK Cancel

For detailed information about the TV-IP100W's configuration and advanced settings, please refer to the User's Guide on the included CD-ROM or to www.TRENDnet.com.

Certifications

This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.

TRENDNET TV-IP100W - Certifications - 1

TRENDNET TV-IP100W - Certifications - 2

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

TRENDnet®

TRENDware, USA

What's Next in Networking

Product Warranty Registration

Please take a moment to register your product online. Go to TRENDware's website at http://www.TRENDNET.com

TRENDnet Technical Support

US/Canada Support CenterEuropean Support Center
ContactTelephone: 1(310) 626-6252Fax: 1(310) 626-6267Email: support@trendnet.comTech Support Hours7:30am - 6:00pm Pacific Standard TimeMonday - FridayContactTelephoneDeutsch : +49 (0) 6331 / 268-460Français : +49 (0) 6331 / 268-461Español : +49 (0) 6331 / 268-462English : +49 (0) 6331 / 268-463Italiano : +49 (0) 6331 / 268-464Dutch : +49 (0) 6331 / 268-465Fax: +49 (0) 6331 / 268-466Tech Support Hours8:00am - 6:00pm Middle European TimeMonday - Friday

TRENDware International, Inc.

3135 Kashiwa Street. Torrance, CA 90505

http://www.TRENDNET.com

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : TRENDNET

Model : TV-IP100W

Category : Surveillance Camera