FlexScan L768 - Screen EIZO - Free user manual and instructions

Product Type	19-inch Color LCD Monitor
Screen Size	19 inches (48 cm) diagonal
Native Resolution	1280 x 1024 (SXGA)
Aspect Ratio	5:4
Contrast Ratio	500:1 (typical)
Brightness	250 cd/m² (typical)
Response Time	16 ms (typical)
Viewing Angles (H/V)	170° / 170° (typical)
Input Signals	Analog D-Sub (RGB) & DVI-D (digital)
Power Consumption (normal operation)	38 W (typical)
Power Consumption (standby)	< 1 W
Dimensions (W x H x D) with stand	Approx. 405 x 400 x 205 mm
Weight (with stand)	Approx. 6.0 kg
VESA Mount	100 x 100 mm
Certifications	TCO'99, TCO'03, FCC Class B, ICES-003, Energy Star
Plug and Play	DDC1/2B (VESA)
Kensington Lock	Yes
Power Input	100-120 Vac / 200-240 Vac, 50/60 Hz (auto-switching)
User Controls	OSD with brightness, contrast, color adjustment, etc.

Frequently Asked Questions - FlexScan L768 EIZO

How do I clean the screen of my Eizo FlexScan L768?

Use a soft, lint-free cloth slightly dampened with water or a mild screen cleaning solution. Never use alcohol, ammonia, or abrasive cleaners. Gently wipe the screen in a circular motion.

What cables are included with the Eizo FlexScan L768?

The monitor includes a D-Sub analog signal cable and a DVI-D digital signal cable, as well as an AC power cord. Use shielded cables to maintain FCC Class B compliance.

How can I adjust the screen resolution on my FlexScan L768?

Connect the monitor to your computer and go to your operating system's display settings. For best results, set the resolution to 1280 x 1024 (native). The monitor supports resolutions up to 1600 x 1200 via scaling.

What does the TCO certification mean for this monitor?

TCO'99 and TCO'03 certifications ensure ergonomic design, low energy consumption, and environmental compliance. This includes restrictions on hazardous substances like lead, mercury, and brominated flame retardants, and a guarantee of good visual ergonomics.

Why is my monitor displaying a 'No Signal' message?

Check that the signal cable is securely connected to both the monitor and the computer. Ensure the computer is powered on and the correct input source is selected via the OSD menu (analog or DVI). Try pressing any key or moving the mouse to wake the system from sleep mode.

How do I enable the energy saving mode?

The FlexScan L768 supports VESA Display Power Management Signaling (DPMS). Enable power saving in your computer's power settings. The monitor will automatically switch to standby mode (< 1 W) when no signal is detected.

Can I mount my FlexScan L768 on a VESA arm?

Yes, the monitor is VESA compatible with a 100 x 100 mm mounting pattern. Remove the stand by releasing the locking mechanism and attach the VESA bracket securely.

The image appears fuzzy or blurry. What should I do?

Set the resolution to the native 1280 x 1024. Use the Auto Adjustment feature in the OSD menu to fine-tune clock and phase. For analog connections, ensure the video cable is not damaged and is properly shielded.

How do I reset the monitor to factory defaults?

Press the Menu button to open the OSD, navigate to 'Other' or 'Tools', and select Reset. Confirm to restore all settings to factory defaults.

What are the precautions for using the monitor near medical equipment?

The monitor emits electromagnetic fields. Keep it away from sensitive medical devices (e.g., pacemakers). Follow all safety instructions in the manual, including maintaining proper ventilation and avoiding exposure to rain or moisture.

USER MANUAL FlexScan L768 EIZO

Illustration of a computer monitor with a prohibition symbol above and a pair of flowers, no text or labels present.

WARNUNG

Kensington Technology Group

2855 Campus Drive, San Mateo, CA 94403 USA

Tel.: [phone], x3348, Intl: 650-572-2700, x3348

Fax: [phone]

http://www.kensington.com

Diagram showing a checkerboard pattern inside a square frame with an arrow pointing to it, no text or symbols present.

graph LR
    A["Rectangular Box with horizontal bars labeled 'A', 'B', 'C'"] --> B["Vertical Bar Chart with horizontal lines and tick marks"]
    B --> C["Empty Rectangle"]

graph LR
    A["Document with horizontal lines"] --> B["Output"]

Two square frames with arrows indicating transformation, no text or symbols present

Pin No.	Signal	Pin No.	Signal	Pin No.	Signal
1 Red video 6 Red ground 1	1 Ground Shorted
2 Green video 7 Green ground 12			Data (SDA)
3 Blue video 8 Blue ground 13 H. Sync
4	Ground	9	No pin	14	V. Sync
5	No pin	10	Ground Shorted	15	Clock (SCL)

DVI-D-Anschluss

Pin No.	Signal	Pin No.	Signal	Pin No.	Signal
1	TMDS Data 2-	9	TMDS Data 1-	17	TMDS Data 0-
2	TMDS Data 2+	10	TMDS Data 1+	18	TMDS Data 0+
3	TMDS Data 2/4 Shield	11	TMDS Data 1/3 Shield	19	TMDS Data 0/5 Shield
4	NC*	12	NC*	20	NC*
5	NC*	13	NC*	21	NC*
6	DDC Clock (SCL)	14	+5V Power	22	TMDS Clock shield
7	DDC Data (SDA)	15	Ground (For +5V)	23	TMDS Clock+
8	NC	16	Hot Plug Detect	24	TMDS Clock-

(*NC: No Connection)

9. GLOSSAR

Auflösung

(DVI Digital Monitor Power Management)

(Transition Minimized Differential Signaling)

Based on the signal diagram shown below 20 factory presets have been registered in the monitor's microprocessor.

Congratulations!

The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment.

Some of the features of the TCO'03 Display requirements:

Ergonomics

● Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability.

Energy

● Energy-saving mode after a certain time - beneficial both for the user and environment
- Electrical safety
- Emissions Electromagnetic fields
- Noise emissions

Ecology

• The products must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14000
• Restrictions on

○ chlorinated and brominated flame retardants and polymers
○ heavy metals such as cadmium, mercury and lead.

The requirements includes in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays in 1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit

www.tcodevelopment.com

Congratulations!

You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.

Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used both in the products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these potentially damaging substances sooner or later enter nature.

There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy.

What does labelling involve?

This product meets the requirements for the TCO'99 scheme which provides for international and environmental labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration).

Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric and magnetic fields, energy consumption and electrical and fire safety.

The environmental demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy.

The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shall be reasonable for the user.

Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields, physical and visual ergonomics and good usability.

You will find a brief summary of the environmental requirements met by this product on the right. The complete environmental criteria document may be ordered from:

TCO Development

SE-114 94 Stockholm, Sweden

Fax: [phone]

Email (Internet): [e-mail]

Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/

Environmental Requirements

Flame retardants

Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur.

The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available.

Cadmium\*\*

Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses.

The relevant TCO'99 requirement states that batteries, the colour-generating layers of display screens and the electrical or electronics components must not contain any cadmium.

Mercury\*\*

Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high doses.

The relevant TCO'99 requirement states that batteries may not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit.

CFCs (freons)

The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.

Lead\*\*

Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning.

The relevant TCO'99 requirement permits the inclusion of lead since no replacement has yet been developed.

* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are haevy metals which are Bio-accumulative.

For U.S.A, Canada, etc. (rated 100-120 Vac) Only

FCC Declaration of Conformity

We, the Responsible Party EIZO NANAO TECHNOLOGIES INC.

5710 Warland Drive, Cypress, CA 90630

Phone: [phone]

declare that the product Trade name: EIZO

Model: FlexScan L768/L768-AS

is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note

Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device.

• AC Cord
• Shielded Signal Cable (enclosed)

Canadian Notice

This Class B digital apparatus complies with Canadian ICES-003.

Recycling Information for customers in Switzerland:

All recycling information is placed in the SWICO's website. http://www.swico.ch

Recycling Information for customers in USA:

All recycling information is placed in the EIZO Nanao Technologies, Inc's website. http://www.eizo.com/contact/index.html