6555i - Printer Triumph-Adler - Free user manual and instructions

USER MANUAL 6555i Triumph-Adler

Exterior view of a modern office typewriter with open door and control panel (no visible text or symbols)

Exterior view of a modern office typewriter with front panel and internal drive mechanism (no visible text or symbols)

Einleitung

Card Authentication Kit (B) Operation Guide

Data Security Kit (E) Operation Guide

Network Tool for Direct Printing Operation Guide

Energy Star (ENERGY STAR®) Programm 1-14

Logout/Abmelden 2-26

7 Status/Druck abbrechen 7-1

Energy Star (ENERGY STAR®) Programm 1-14

Hinweis

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT

Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [e-mail].
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

Copyright (C) 1995-1998 Eric Young ([e-mail]) All rights reserved.

This package is an SSL implementation written by Eric Young ([e-mail]). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([e-mail]).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young ([e-mail])"
   The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson ([e-mail])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

Monotype Imaging License Agreement

1 Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.
2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multiuser license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.
3 To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.
The parties agree that all other warranties, expressed or implied, including warranties of fitness for a particular purpose and merchantability, are excluded.
8 Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.
In no event will Monotype Imaging be liable for lost profits, lost data, or any other incidental or consequential damages, or any damages caused by abuse or misapplication of the Software and Typefaces.
9 Massachusetts U.S.A. law governs this Agreement.

10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging.
11 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
12 You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms and conditions. Neither party shall be bound by any statement or representation not contained in this Agreement. No change in this Agreement is effective unless written and signed by properly authorized representatives of each party. By opening this diskette package, you agree to accept the terms and conditions of this Agreement.

Knopflerfish License

This product includes software developed by the Knopflerfish Project. http://www.knopflerfish.org

Copyright 2003-2010 The Knopflerfish Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
• Neither the name of the KNOPFLERFISH project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Apache License (Version 2.0)

Apache License

Version 2.0, January 2004

http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.

"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

1. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
2. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
3. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.

You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

1. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
2. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
3. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
4. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
5. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

APPENDIX: How to apply the Apache License to your work.

To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives.

Copyright [yyyy] [name of copyright owner]

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Energiesparfunktion

Energy Star (ENERGY STAR®) Programm

Logout/Abmelden 2-26

Technical diagram of an electronic device with numbered components and labeled parts in Chinese

Isometric view of a server rack with multiple green panels and black arrows indicating movement or assembly (no text or symbols)

Diagram showing a hand inserting a device into a server rack, with a red circle highlighting the component.

Architectural line drawing of a building facade with window and doorways (no text or symbols)

Isometric view of a server rack with highlighted panel and directional arrows indicating movement (no text or symbols)

Isometric view of a server rack with green panel connectors and black arrows indicating movement or assembly (no text or symbols)

Diagram showing a device panel with a highlighted switch and magnified view of the internal components.

Architectural line drawing of a building facade with window and doorways (no text or symbols)

Isometric view of a server rack with highlighted internal components and directional arrows indicating movement (no text or symbols)

Illustration of a computer monitor with a hand pressing a button on the right panel (no text or symbols visible)

Illustration of a computer monitor with a hand pressing a button on the right panel (no text or symbols visible)

Illustration of a hand holding a CD with an open screen, next to a laptop (no text or symbols present)

HINWEIS

Illustration of a hand holding a CD with an open screen, next to a laptop (no text or symbols visible)

Illustration of a green robotic arm with directional arrows indicating motion or feedback (no text or symbols)

Illustration of a hand inserting a green plastic tray into a rack, with an arrow indicating the process (no text or symbols present)

HINWEIS

Illustration of a hand holding a green mechanical component next to an open printer (no text or symbols visible)

Diagram showing a printer file being inserted into a green paper with an arrow indicating the process, accompanied by a software interface with a red progress bar and directional arrows.

WICHTIG

Pure architectural floor plan lines without any text, numbers, or symbols

Diagram illustrating printer press operation with lock, printer, and card display steps

Illustration of a hand inserting a device into a computer tower (no text or symbols visible)

Diagram showing a printer's internal structure with an icon and directional arrow, indicating print direction or orientation.

Diagram illustrating a file transfer or storage operation on a computer, showing hand positioning and directional arrows.

Diagram illustrating the process of file transfer or viewing, showing hand positioning and playback controls on a computer.

Statement 5½ Letter Legal Off/Off 12.10mm ADD A3C B4D ADD ADD FolbD 5½

3 Papier einlegen.

Diagram showing hands installing a device with an upward arrow and a label indicating '35%+'

1 2 3 A A A → A 1 2 3

Illustration of hands holding a green document with an upward arrow, no text or symbols present

Illustration of a hand using a green paper filter to press documents into a printer (no text or symbols visible)

Illustration of a hand inserting a green plastic tray into a computer case (no text or symbols visible)

Diagram showing a device with a component being inserted, labeled with arrows and a small inset image.

Diagram of a printer drawer with two arrows indicating movement or assembly (no text or symbols present)

Diagram illustrating a mechanical or electrical system with rotating components and directional arrows indicating motion or flow.

Illustration of hands installing or adjusting a printer's cover panel with arrows indicating process (no text or symbols present)

WICHTIG

Diagram showing printer operation with labeled parts and directional arrows indicating movement or assembly.

WICHTIG

3D diagram of a printer with arrows indicating motion or movement, no text or symbols present

Diagram showing printer paper processing with a red arrow indicating the number of units and an upward arrow pointing to the paper.

Illustration of a hand inserting a card into a printer (no text or symbols visible)

Illustration of hands operating a printer with a computer monitor in the background (no text or symbols visible)

HINWEIS

Illustration of a hand inserting a card into a printer (no text or symbols visible)

Illustration of hands operating a printer with a monitor on top (no text or symbols visible)

graph TD
    A["Printer"] -->|Red Arrow| B["Phone"]
    A -->|Red Arrow| C["Computer"]
    A -->|Red Arrow| D["Email"]

Illustration of a hand inserting a card into a printer (no text or symbols visible)

Illustration of hands operating a printer with a monitor and paper roll (no text or symbols visible)

Illustration of a hand inserting a card into a printer (no text or symbols visible)

Illustration of hands operating a printer with an open lid and a monitor, no text or symbols present

3 Auf [WSD-Scan/DSM-Scan] tippen.

Illustration of a hand inserting a card into a printer (no text or symbols visible)

Illustration of hands operating a printer with a monitor on top (no text or symbols visible)

Illustration of a hand inserting a card into a printer (no text or symbols visible)

Illustration of hands operating a printer with a monitor and paper nearby (no text or symbols visible)

Illustration of a hand inserting a component into a device (no text or symbols visible)

Illustration of a hand inserting a card into a printer (no text or symbols visible)

Illustration of hands operating a printer with an open lid and a monitor nearby (no text or symbols visible)

Illustration of a printer's door panel being inserted into a device, showing the left side with a hand inserting a cable (no text or symbols present)

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none should exist in the GT. Hence, the OCR result is inconsistent with the Ground Truth.

Funktionen

graph LR
    A["Star Rating"] --> B["Rating Indicator"]
    B --> C["Final Rating"]

[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]

Originalvorlage

Bildqualität

Senden

Two leaf icons: a green leaf with white veins and a gray leaf with white vein, separated by a red play triangle (no text or symbols)

m = 311

qualität

Funktionen

[Non-Text]

Colorful paperclip fragments scattered on a light background (no text or symbols visible)

Colorful paperclip samples scattered on a white background (no text or symbols visible)

Close-up of colorful paperclip fragments scattered on a white background (no text or symbols visible)

Diagram showing a split pie chart before and after transformation, with a red arrow pointing to the right side.

Diagram showing a document splitting into two pie charts, indicating a structural change or data visualization.

Original Kopie

Diagram showing transformation from an open book to a blank document with placeholder text and a play button

Original Kopie

Diagram showing a document being converted to a document, with a play button indicating the process.

Original Kopie

abc def ghi Original

graph TD
    A1["Document Image"] --> B1["Blank Image"]
    B1 --> C1["Document Image with Pie Chart"]
    C1 --> D1["Blank Image"]

Original Kopie

"FAX-Port 1", "FAX-Port 2"

ABR.-BERICHT MFP Firmware Version 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 12.12.23.24.25.26.27.28.29.30.31.32.33.34.35.36.37.38.39.40.41.42.43.44.45.46.47.48.49.50.51.52.53.54.55.56.57.58.59.60.61.62.63.64.65.66.67.68.69.70.71.72.73.74.75.76.77.78.79.80.81.82.83.84.85.86.87.88.89.90.91.92.93.94.95.96.97.98.99.10 11:12:13:14:15:16:17:18:19:20:21:22:23:24:25:26:27:28:29:30:31:32:33:34:35:36:37:38:39:40:41:42:43:44:45:46:47:48:49:50:51:52:53:54:55:56:57:58:59:60:61:62:63:64:65:66:67:68:69:70:71:72:73:74:75:76:77:78:79:80:81:82:83:84:85:86:87:88:89:90:91:92:93:94:95:96:97:98:99:10 11:12:13:14:15:16:17:18:19:20:21:22:23:24:25:26:27:28:29:30:31:32:33:34:35:36:37:38:39:40:41 11:12:13:14:15:16:17:18:19[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] ABR.-BERICHT MFP Firmware Version

Illustration of a hand using a tool to clean or press a printer (no text or symbols visible)

Illustration of a printer's internal printing process with a hand cleaning the paper (no text or symbols visible)

Illustration of a hand inserting a green card into a device component (no text or symbols visible)

2

Hand cleaning a mechanical component with a blue sheet (no text or symbols visible)

Illustration of a hand inserting a green stripe into a mechanical device (no text or symbols visible)

3

Diagram showing a hand inserting a component into a car chassis, with an arrow indicating the process (no text or symbols present)

Illustration of a hand inserting a green plastic device into an open case (no text or symbols visible)

Geräteinneres

Illustration of a printer's internal structure with a no-smoking symbol (no text or labels present)

1

Diagram showing a hand inserting a green tool into a device with an arrow indicating the process, alongside a magnified view of the component.

Illustration of a printer internal structure with a hand inserting a green folder into it (no text or symbols visible)

2

Illustration of a hand inserting a green component into a computer drive (no text or symbols visible)

3

CLICK!

Separator

Diagram illustrating printer operation with labeled parts and directional arrows indicating process steps

2

Technical diagram showing printer internal structure and assembly process with Chinese annotations

3

CLICK!

Illustration of hands installing or adjusting a green-labeled printer into a stack top (no text or symbols visible)

2

Illustration showing a hand inserting a device into an open file, with a red arrow indicating the process (no text or symbols present)

3

Illustration of a green electronic device wrapped in a plastic sheet, with an arrow indicating the component (no text or symbols present)

4

Diagram of a green and white vehicle with a black arrow indicating motion or force (no text or symbols)

5

5~ 5~

5~

6

Illustration of hands installing a green mechanical device into a computer chassis (no text or symbols visible)

CLICK!

7

Illustration of hands operating a printer with a green cover and arrow indicating a process (no text or symbols present)

HINWEIS

Illustration of a hand inserting a device into a rack with a green arrow indicating the direction (no text or symbols present)

2

Diagram showing a hand inserting a device into a server rack, with an arrow indicating the process.

3

Diagram showing a mechanical assembly with labeled parts and directional arrows indicating movement or assembly.

Diagram of a mechanical device with a downward arrow indicating motion or force, no text or symbols present

4

Illustration of a green electronic device mounted on an open box, with an upward arrow indicating motion (no text or symbols present)

5

Illustration of a hand inserting a green folder into a computer drive (no text or symbols visible)

CLICK!

6

Illustration of a hand pressing down on a server rack with a green vertical line (no text or symbols)

HINWEIS

Illustration of a hand inserting a green folder into an office machine (no text or symbols visible)

Interior view of a mechanical device showing internal components and a downward arrow indicating a specific part (no text or symbols present)

2

1 2 1

Diagram showing two 3D mechanical components with arrows indicating assembly or transformation (no text or symbols present)

HINWEIS

Diagram showing two steps of a printer or printer operation: left panel with green device and black directional arrows, right panel with green device and black directional arrows.

2

Technical diagram of a mechanical device showing internal components and a close-up view with an arrow indicating a specific section (no text or symbols present)

3

graph TD
    A["Assembly Step 1: Green Vehicle Body"] --> B["Assembly Step 2: Internal Components"]
    B --> C["Assembly Step 3: Internal Components with Component 1, 2, 1, 1"]
    C --> D["Assembly Step 4: Internal Components with Component 1, 2, 1, 1"]
    D --> E["Assembly Step 5: Internal Components with Component 1, 2, 1, 1"]

HINWEIS

Diagram illustrating a process of file transfer or handling, showing hand positioning and directional arrows on a green folder.

Diagram illustrating a printer's internal mechanism with labeled parts and directional arrows indicating process flow.

HINWEIS

Illustration showing a person cleaning a green plastic bag while opening the internal machine (no text or symbols present)

3

Illustration of a hand opening a green folder with an arrow indicating left motion (no text or symbols)

Störungsbeseitigung

Fehler beseitigen

Illustration of a printer with an open lid and a QR code inserted into the page (no text or symbols present)

Illustration showing two steps of inserting a computer into a rack, with hands operating the component (no text or symbols present)

2

Illustration showing two steps of inserting a device into a rack, with no visible text or symbols.

HINWEIS

Illustration of a hand using a green tool to adjust a green tray (no text or symbols visible)

Kassette 2

1

Illustration showing a hand inserting a green card into a computer tower, with no text or symbols present.

2

Two-step diagram showing a hand inserting a device into a rack, with a red arrow indicating the process (no text or symbols present)

HINWEIS

Illustration of a hand using a green tool to adjust or install a green tray (no text or symbols visible)

Kassetten 3 und 4

1

Diagram showing a hand pressing a button on a device with labeled parts and directional arrows

2

Illustration of a hand inserting a green component into a server rack (no text or symbols visible)

Illustration of a hand using a tool to adjust or install a component inside a device (no text or symbols visible)

3

Illustration of a hand inserting a green device into an open storage unit (no text or symbols visible)

Illustration of a hand inserting a green folder into a file organizer (no text or symbols visible)

4

3D rendering of an open computer drive with a green circuit board inside, labeled B1 (no text or symbols on the device itself)

B2

Universalzufuhr

1

Illustration of a hand inserting a card into a computer drive (no text or symbols visible)

Illustration of a hand inserting a device into a computer tower (no text or symbols visible)

2

Illustration of a hand inserting a green card into a computer tower (no text or symbols visible)

3

Illustration of a hand inserting a green device into a computer tower (no text or symbols visible)

4

Illustration of a hand inserting a card into a computer drive (no text or symbols visible)

Two-step diagram showing a hand inserting a green card into a computer case, with a red play button and black arrows indicating motion (no text or symbols)

2

Illustration showing hands inserting a green computer into an open storage unit, with a red arrow indicating the process (no text or symbols present)

Illustration of a printer's internal structure and assembly process, showing part being inserted into a device (no text or symbols present)

2

Illustration of a hand inserting a device into a server rack with a warning symbol (no text or labels)

Illustration of a printer's internal structure showing a green cover being inserted into a machine, with no visible text or symbols.

2

CLICK!

3

Hand inserting a green card into a printer's case, showing mechanical components and a downward arrow (no text or symbols)

Illustration of a hand inserting a card into a computer drive (no text or symbols visible)

4

Illustration of a hand using a tool to clean or discard material inside a printer (no text or symbols visible)

HINWEIS

Illustration of a hand using a green tool to adjust a green tray (no text or symbols visible)

Heizung

1

Illustration of a printer's internal circuit board with a hand inserting a green folder (no text or symbols visible)

Illustration of a hand inserting a card into a computer drive (no text or symbols visible)

2

Diagram showing hands installing a green component labeled A1 with warning symbol and arrow indicating process

Person installing or adjusting a green component on an electronic device panel (no text or symbols visible)

Vorlageneinzug

1

Illustration of a hand inserting a green card into a printer (no text or symbols visible)

2

Illustration of a printer with a hand inserting a component into the cover, next to a monitor and paper (no text or symbols visible)

3D diagram of a printer internal structure showing a green cover and paper tray, with no visible text or symbols.

3

Diagram showing mechanical assembly with gear and tool, annotated with directional arrows and a magnified inset highlighting the gear component.

Illustration of a hand inserting a green card into an open printer (no text or symbols visible)

2

Illustration of a printer's internal circuit with a green open door and a hand inserting a cable (no text or symbols visible)

3

A1

Person inserting a green card into a computer rack (no text or symbols visible)

Übergabeeinheit

1

Diagram illustrating the process of inserting a device into an open file, with Chinese annotations indicating the process sequence.

2

Illustration of a printer's internal structure before and after assembly, showing green cover and black arrows indicating motion (no text or symbols)

4.000 Blatt Dokumentenfinisher (optional)

Illustration of a hand inserting a green folder into an office machine (no text or symbols visible)

2

D1

Illustration of a person inserting a device into a computer case, showing internal components and a hand holding a green button (no text or symbols present)

Ablage A

1

Illustration of a hand inserting a card into a computer interface (no text or symbols visible)

Illustration of a hand inserting a green folder into an office machine (no text or symbols visible)

2

D6

Diagram of a hand inserting a device into a machine, showing internal components and a green arrow indicating direction (no text or symbols present)

3

D4

HINWEIS

Illustration of a hand inserting a green component into a mechanical device (no text or symbols visible)

2

Diagram showing a hand inserting a green folder into a printer, with an arrow indicating leftward movement.

D2

3

Diagram showing a hand inserting a component into a computer motherboard with labeled parts D3 and directional arrows indicating process flow.

Ablage C

1

Illustration of a printer's internal structure showing paper feeding into a printer (no text or symbols visible)

Illustration of a hand pressing a green triangular object onto a printer's base (no text or symbols)

Papierführung

1

Illustration of a hand inserting a green folder into a printer (no text or symbols visible)

D2

2

D3

Mailbox Sorter (optional)

1

Diagram showing a printer or printer with labeled parts and directional arrows indicating process flow or movement.

Falteinheit (optional)

Ausgabeeinheit

1

Diagram showing two labeled steps (1 and 2) of a mechanical assembly or cleaning process with green components being inserted.

Diagram showing a hand inserting a component into a mechanical device, with labeled parts 1 and 2.

2

Technical diagram showing mechanical assembly with labeled parts and directional arrows indicating motion or movement

D9

3

Close-up of a hand inserting a green plastic component into a mechanical device (no text or symbols visible)

D9

Papierführung

1

Diagram showing a hand inserting a green label into a printer, with an arrow indicating leftward movement.

2

D7

D5

Illustration of a server rack with a hand inserting a cable into the rack (no text or symbols visible)

4

D8

Illustration of a hand inserting a component into a device housing (no text or symbols visible)

5

Illustration of a hand inserting a green component into a device casing (no text or symbols visible)

Kassette 5 (optional)

Hand inserting a green card into a computer drive (no text or symbols visible)

2

Illustration of a computer tower with an open door and internal compartments (no text or symbols)

Illustration of a hand inserting a green packet into a computer tower (no text or symbols visible)

Diagram showing a hand pressing a button labeled '1' to press a device, with a numbered arrow indicating step 2.

Hand inserting a green card into a computer drive (no text or symbols visible)

2

Illustration of a printer with green circuitry and black arrows indicating process flow (no text or symbols)

Illustration of hands inserting or removing a green card into an open printer (no text or symbols visible)

HINWEIS

Illustration of a hand inserting a green plastic tray into an open printer (no text or symbols visible)

Illustration of a printer being inserted into a paper airplane, showing the green cover (no text or symbols present)

Diagram showing a hand pressing a button on a device with labeled parts and directional arrows

Hand inserting a green card into a computer drive (no text or symbols visible)

3

Illustration of a hand inserting a small electronic device into a machine (no text or symbols visible)

Hand inserting a green card into a device (no text or symbols visible)

4

Illustration of a hand inserting a green internal component into a device casing, with an arrow indicating the component's direction (no text or symbols present)

Illustration of a printer's internal structure with a hand inserting a component (no text or symbols visible)

HINWEIS

Illustration of a hand pressing down on a green mechanical component with an arrow indicating motion (no text or symbols)

Diagram illustrating a file transfer process: adding a folder to a green filing box, then using a green folder to remove it.

3

Illustration showing a hand inserting a device into a device with a green cover, before and after the next step (no text or symbols present)

4

Illustration showing a hand inserting a green folder into an internal storage unit, with a red arrow indicating the process (no text or symbols present)

5

B1 B2

Illustration of a hand inserting a green folder into an office machine (no text or symbols visible)

Technical diagram of an open industrial machine with internal components and a downward arrow indicating motion (no text or symbols present)

2

Technical diagram of a mechanical component with numbered parts and directional arrows indicating flow or movement.

Technical line drawing of a mechanical component with internal channels and mounting brackets (no text or symbols)

3

CLICK!

Illustration of a hand inserting a green folder into a printer (no text or symbols visible)

Illustration of a hand inserting a device into a server rack with a green arrow indicating left motion (no text or symbols)

2

Technical diagram of a mechanical device showing internal components and a close-up view (no text or symbols)

3

Technical diagram of a mechanical assembly with numbered components and directional arrows indicating motion or flow.

3D mechanical assembly diagram showing internal components and a green component (no text or labels)

4

CLICK!

11 Anhang

(12) Card Authentication Kit(B) "Kartenleser-Kit"

Illustration of a hand inserting a green folder into a gray container with a downward arrow (no text or symbols)

(20) UG-33 "ThinPrint Option"

(21) UG-34 "Emulation Upgrade Kit"

Grate Grate

DHCP (Dynamic Host Configuration Protocol)

KPDL (Kyocera Page Description Language)

NetBEUI (NetBIOS Extended User Interface)

TWAIN (Technology Without Any Interested Name)

WIA (Windows Imaging Acquisition)

Data Security Kit 11-6

Datei

Format 6-62

PDF 6-64

Trennung 6-65

Dateiformat

Standard 8-16

Memory Diagnostics 8-58

Emulation Upgrade Kit 11-6

Energiemanagement 1-13

Energy Star (ENERGY STAR®) Programm 1-14

Enhanced WSD

Enhanced WSD over SSL

Memory Diagnostics 8-58

Memoseite 6-48

Monotype Imaging License Agreement 1-9

N

Negativbild 6-56

Card Authentication Kit (Kartenleser Kit) 11-5

Copy Tray(D) 11-4

Data Security Kit 11-6

Emulation Upgrade Kit 11-6

Falteinheit 11-4

Printed Document Guard Kit 11-5

OptionPrinted Docmuent Guard Kit 11-5

Original

Einstellungen 8-10

Format xiv

Original anlegen

Original Stopper 2-2

Originalausrichtung

Printed Document Guard Kit 11-5

Printed Document Guard Kit (Kopierschutz-Kit) 11-5

Printed Document Gurad Kit 11-5

Product Library ix

Programm 5-7

Status/Druck abbrechen 7-1

Statusseite 11-33

Stromkabel

Anschließen 2-11