37FLHD846 - Television Finlux - Free user manual and instructions

Product Type	LCD Television
Brand	Finlux
Model	37FLHD846
Screen Size	37 inches (94 cm)
Display Resolution	1366 x 768 pixels (HD Ready)
Aspect Ratio	16:9
Tuner	DVB-T/C (MPEG-4), Analog
Connectivity	HDMI (1.3) x2, VGA x1, SCART x1, Component (YPbPr) x1, Composite (AV) x1, USB 2.0 x1, RF x1, Headphone out
Power Supply	AC 100-240V, 50/60Hz
Power Consumption (Typical)	110 W
Standby Power	< 1 W
Dimensions (W x H x D) with Stand	900 x 580 x 220 mm
Dimensions (W x H x D) without Stand	900 x 530 x 90 mm
Weight (with stand)	12.5 kg
Weight (without stand)	10.5 kg
VESA Mount	200 x 200 mm
Energy Efficiency Class	B (EU)
Additional Features	Teletext, Sleep Timer, Child Lock, Picture Modes, Sound Modes
Cleaning Instructions	Clean the screen with a soft, dry cloth. Do not use water or cleaning agents directly on the screen. Wipe the cabinet with a damp cloth and mild detergent.
Safety Warnings	Do not block ventilation openings. Avoid prolonged static images. Keep away from heat sources. Do not expose to rain or moisture.
Spare Parts & Repairability	Spare parts (e.g., power board, screen) may be available through authorized service centers. Contact Finlux customer support for repairs.

Frequently Asked Questions - 37FLHD846 Finlux

How do I connect my TV to a cable or satellite box?

Use an HDMI cable for best quality. Connect the HDMI output of your box to one of the HDMI ports on the TV (usually labelled HDMI1 or HDMI2). Then select the corresponding HDMI source using the Source button on the remote.

How can I perform a channel scan?

Press the Menu button on the remote, go to Setup or Installation, select Auto Tuning or Channel Scan. Choose your signal type (DVB-T or DVB-C) and start the scan. The TV will automatically store available channels.

What should I do if there is no picture but sound is working?

Check that the correct input source is selected. Ensure the video cables are securely connected. Try adjusting the brightness and contrast settings. If the issue persists, perform a factory reset from the Settings menu.

How do I clean the screen safely?

Turn off the TV and let it cool. Use a soft, dry microfiber cloth to gently wipe the screen in a circular motion. Do not apply liquid directly; if needed, lightly dampen the cloth with water. Avoid using alcohol, ammonia, or abrasive cleaners.

Why is the remote control not working?

First, check the batteries: replace them if low. Make sure there are no obstructions between the remote and the TV’s IR sensor. Try pointing the remote directly at the sensor. If still not working, reset the TV by unplugging it for 30 seconds.

What are the recommended picture settings for best quality?

For general viewing, select Standard or Cinema picture mode. Adjust brightness to your preference (around 50-60%), contrast at 80-90%, and sharpness to 50%. Reduce backlight for darker rooms. Use Warm color temperature for more natural tones.

Can I mount this TV on a wall?

Yes, the TV is VESA compatible with a 200 x 200 mm pattern. Use a suitable wall mount rated for at least 15 kg. Ensure the wall can support the weight and follow the installation guide provided with the mount.

How do I connect a USB device to play media?

Insert the USB drive into the USB port on the side of the TV. Press the Source button and select USB. Use the remote to navigate and select media files (photo, music, video). The TV supports common formats like MP4, JPEG, and MP3.

Why is the TV turning off by itself?

This could be due to the Sleep Timer being set. Press Menu, go to Timer and disable it. Also check if Auto Power Off is enabled (turns off after no signal). If the problem persists, try a factory reset or contact support.

How do I enable subtitles?

While watching a channel, press the Subtitle button on the remote. If not available, go to Menu > Setup > Subtitle Language and select your preferred language. Ensure the broadcast includes subtitles (e.g., Teletext page 888).

USER MANUAL 37FLHD846 Finlux

Black-and-white photo of a man and woman relaxing on a sofa in an office setting, with no visible text or symbols.

Diagram of a device with labeled parts and directional arrows (no text or symbols)