20A5T - TV DAEWOO - Free user manual and instructions

Product Type	CRT Television
Brand	Daewoo
Model	20A5T
Screen Size	20 inches (diagonal)
Power Supply	220V AC, 50Hz
Remote Control	Included, uses 2x AA batteries
Tuning System	Automatic and manual, 70 program positions (0-69)
Teletext	With TOP/FLOF, subpage support, hold, double size, cancel
Timer Functions	Clock, wake-up, sleep (up to 180 min), auto-off in no signal
Child Lock	Can be activated via remote control sequence
Picture Adjustment	Brightness, color, contrast, sharpness, tint (NTSC), three picture modes
Sound Control	Volume adjustment, mute function
Aerial Connection	75 ohm coaxial cable, indoor or outdoor aerial
Language Options	English, French, German, Italian, Spanish
Standby Indicator	Red LED, illuminates in standby mode
Main Power Switch	Located on the TV, turns set completely off
Battery Requirement	Two 1.5V AA batteries for remote control
Safety Note	After moving the set, wait at least 15 minutes before switching on to avoid color stains
Working Life	7 years from production date, may become hazardous after expiry

Frequently Asked Questions - 20A5T DAEWOO

How do I insert batteries into the remote control?

Press down the battery compartment grip and slide the cover off. Insert two 1.5V AA batteries, making sure the polarity matches the (+) and (-) marks inside. Slide the cover back into place. Dispose of used batteries properly.

How do I connect the aerial to the TV?

Use a 75 ohm coaxial cable to connect your outdoor or indoor aerial to the aerial input on the back of the TV. For strong signal areas, an indoor aerial may suffice. Ensure the connection is secure for best picture and sound.

How do I automatically tune channels?

Press the MENU button, then select PRESET from the MAIN MENU. Place the cursor on the right arrow and press and hold the OK button until the tuning screen appears. The set will scan through VHF-L, VHF-H, and UHF bands automatically. Wait until the EDIT menu appears to confirm channels are stored.

How do I set the clock on my Daewoo TV?

Press MENU, select TIMER. Choose CLOCK and use the number buttons (0-9) to enter the hour and minute. Press OK to confirm. Note: if you turn off the TV with the main power button, the clock resets and must be set again.

How do I activate the child lock?

With the TV on, press the Y, C, and TELETEXT (POWER) buttons in sequence on the remote control within 5 seconds. The standby indicator will flash, indicating child lock is active. The TV can only be turned on using the remote control.

How do I use teletext?

Press the TELETEXT button to view the last index page. Use number buttons to enter a page number, or use color buttons (red, green, yellow, blue) for quick access if TOP/FLOF is broadcast. Press HOLD to freeze a subpage, SUBPAGE to enter a specific subpage, and CANCEL to watch TV while teletext is displayed. Press TELETEXT again to exit.

How do I adjust picture settings?

Press MENU, select PICTURE. Use UP/DOWN to choose BRIGHTNESS, COLOUR, CONTRAST, SHARPNESS, or TINT (NTSC only). Use LEFT/RIGHT to adjust each value. The settings are stored in FAVOURITE mode. You can also press NORMAL repeatedly to cycle through picture presets.

How do I set the sleep timer?

Press the SLEEP button repeatedly to cycle through options: 30, 60, 90, 120, 150, 180 minutes, or OFF. The TV will automatically turn off after the selected time. The timer can be cancelled by selecting OFF or by pressing SLEEP until the display shows '0'.

What should I do if the TV does not turn on?

First, ensure the main power switch on the TV is set to ON. Check that the power cord is securely plugged into a 220V/50Hz AC outlet. If the standby indicator is lit, press the POWER button on the remote or a channel button. If the TV still does not respond, try unplugging it for a few minutes and then plugging it back in.

How do I change the language of the on-screen menus?

Press MENU, then select LANGUAGE from the MAIN MENU. Use UP/DOWN to highlight your preferred language (English, French, German, Italian, or Spanish). Press OK to confirm. The menus will now display in the chosen language.

USER MANUAL 20A5T DAEWOO

AFTER MOVING THE SET

If the used set is moved or placed in a different direction, the MAIN POWER button must be switched off for at least 15 minutes in order to take out a colour strain on the screen.

INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT

Press down the battery compartment grip and slide the cover, Insert the batteries supplied(two 1.5v, type AA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment.

Used batteries should be disposed of properly.

AERIAL CONNECTION

For better picture and sound quality, an effective aerial installation is the most important. If you are located in a relatively strong area, you will be able to use the indoor aerial. When using an outdoor aerial, it is usually connected to the set by means of 75 ohm coaxial cable.

The working life of this set is 7 years since its production date and this set may be dangerous for the life, health and the property of the consumer, and for the environment on expiry of its working life.

MAINS CONNECTION

Plug the mains cable into the power socket with 220V/50Hz AC.

SWITCHING THE SET ON AND OFF

Switching On

Switch the set on with the MAIN POWER button, ( )The set will turn on.

If not, press either : - PR UP or DOWN button on the front of set - or POWER button or the UP/DOWN button or one of the NUMBER button 0..9 on the remote controller.

The STAND-BY INDICATOR will turn off and a picture will appear on the screen.

Switching off

Press POWER button ( ) on the remote controller to return the set to its stand-by mode.

The STAND-BY INDICATOR will illuminate.

If you don't use the set for extended period of time, turn it off with MAIN POWER button ①

TUNING THE TV CHANNELS

MAIN MENU

Press the MENU button to call up the MAIN MENU.

The MAIN MENU is consist of 5 sub-menus:

PICTURE, TIMER, LANGUAGE, PRESET, EDIT menu.

LANGUAGE SELECTION

Select a LANGUAGE menu at the MAIN MENU by placing the cursor on the LANGUAGE with UP/DOWN button and pressing the OK button. You can choose language you require with UP/DOWN button.

Press the MENU button to return to the MAIN MENU.

Select the PRESET menu at the MAIN MENU.

Place the cursor to "with the RIGHT button.

Press and hold down OK button until the tuning screen appears above the PRESET menu.

The cursor will move from left to right on the VHF-L line, then VHF-H, then UHF.

Please wait until EDIT menu appears.

EDIT

The EDIT menu shows you the programme position assignment. You can change this programme position assignment according to your personal preferences.

SKIPPING THE CHANNELS

You can select SKIP "YES" or "NO" with the SKIP button.

A programme marked with SKIP "YES" is skipped when changing channel using the UP/DOWN button. A skipped programme number selected by NUMBER button 0..9 will be displayed in red.

DELETE PROGRAMME POSITION DATA

Position the cursor to programme number to delete with the UP/DOWN, LEFT/RIGHT buttons.

Press the DEL button. While this is being carried out the "DELETE" Prog. No." appear and the "deleted" programme is moved to the programme no. 69 and changed SKIP "YES". The programme located in the programme no. 69 will move to the programme no. 68.

CHANGING THE ORDER OF THE CHANNELS

Position the cursor to programme number to move and press the MOVE button. The "MOVE Prog. No." will appear.

Position the cursor to programme number to exchange and press the MOVE button. Two programmes will be exchanged.

ENTER A STATION NAME, CHANGING THE PROGRAMME NUMBER AND COPYING A PROGRAMME

You can go to the PRESET menu directly for entering a station name and changing the programme number and copying a programme to another programme no. by pressing the OK button.

Refer to the MANUAL CHANNEL SETTING.

MAIN MENU PICTURE TIMER LANGUAGE PRESET EDIT

LANGUAGE ENGLISH FRANCAIS DEUTSCH ITALIANO ESPAÑOL

AUTO SEARCH UHF >> PRESET P01 P---- --

EDIT
P	SKIP P	SKIP
00	N0	05	N0
01	N0	06	YES
02	N0	07	N0
03	N0	08	N0
04	N0	09	N0

EDIT
P	SKIP	P	SKIP
00	N0	05	N0
01	N0	06	N0
02	N0	07	N0
03	N0	08	N0
04	N0	09	N0

EDIT
P		SKIP	P		SKIP
00	ARD	NO	05	RTL2	NO
01	ZDF	NO	06	- - - - -	NO
02	BR3	NO	07	- - - - -	NO
03	SAT1	NO	08	- - - - -	NO
04	PR07	NO	09	- - - - -	NO

MANUAL CHANNEL SETTING

You can also call up the PRESET menu at the MAIN MENU.

Press the NUMBER button 0..9 or UP/DOWN buttons to select a programme number you want.

The screen will change according to the selected programme number.

SEARCHING A CHANNELS

Locate a cursor to with LEFT/RIGHT button and then press the UP or DOWN button.

The tuning screen will appear and the cursor will move from left to right.

Pressing and holding down the UP/DOWN button during 2 seconds, the band will change as following:

VL-VH-U (For GB, U only).

After searching a station, the tuning screen will disappear.

To stop searching, press the MENU button.

FINE TUNING

If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to adjust the fine tuning.

Move the cursor to and press UP or DOWN button to activate fine tuning up or down.

It obly operates whilst the UP or DOWN button is being pressed.

ENTER A STATION NAME

Select station name in the station name list with UP/DOWN button and press OK button.

If you want to delete a station name, select "----".

If you can't find the desired name in the list, you can enter your own.

To do so, move the cursor to the right and press OK button.

Using the UP/DOWN button, select the desired letter, number or blank.

Press the RIGHT button to select the next position.

Press the OK button to complete this procedure.

TO STORE PROGRAMME IN MEMORY

Move the cursor to the right end with the LEFT/RIGHT button.

Select the programme number that you want to store current displaying programme with station name, fine tuning data and system (FRANCE only) in memory using the UP/DOWN button or NUMBER 0..9.

Press the OK button.

SEARCH UHF PRESET P01

FINE TUNE UHF >> PREFSET P01 P- * ---- --

SELECTING A PROGRAMME NUMBER

The set has a total of 70 programme numbers, 0..69.

The NUMBER button 0..9 are used for direct programme selection.

In order to select two-digit programm, press the second numbered button within two seconds.

Switch through the programme number step by step with the UP/DOWN button.

VOLUME AND PICTURE CONTROL

VOLUME CONTROL

Adjust the volume with the VOLUME ( ) DOWN/UP buttons on the front of the set, or with the LEFT/RIGHT button on the remote control.

MUTE

Pressing the MUTE button ( ) once turns the sound off.

The sound returns if the button is pressed once more or the programme no. is changed.

NORMAL PICTURE SELECTION

When you press the NORMAL button repeatedly you can call up three picture settings'

for NORMAL I(hard picture), NORMAL II(soft picture), FAVOURITE (adjustable picture).

PICTURE CONTROL

Press the MENU button to call up the MAIN MENU.

Press the OK button to call up the PICTURE menu.

You can select each function with the UP/DOWN buttons.

Use the LEFT/RIGHT button adjust each function:

BRIGHTNESS( )-COLOUR( )-CONTRAST( )-SHARP-

NESS( )INT().

* The TINT is active only in NTSC system.

The last set value is automatically stored in FAVOURITE mode.

Note that if you set the brightness and contrast values too low, the On-screen-display become dark.

PICTURE 31 31 63 31 08

TIMER

In the MAIN MENU, Select TIMER menu.

SETTING THE CLOCK

Press the button on the CLOCK line.

Set the hours and minutes with the NUMBER button 0..9 Press the OK button to complete. The clock will start.

Note that if you turn the TV off with MAIN POWER button, the clock setting is lost and must be reset if necessary.

SETTING THE WAKE UP TIME

Set WAKE UP TIME in a same way to the above for CLOCK.

Set ACTIVATE "YES" or "NO" with the LEFT/RIGHT button.

When ACTIVATE is "YES", the function is enabled.

Set WAKE UP PROG using the NUMBER button 0..9 or UP/DOWN button.

When WAKE UP TIME is operate, the set will switch on to this programme number.

SLEEP

By pressing the SLEEP button repeatedly, you can select one of the following setting:

The set will turn off after time you select.

Automatic Switch-Off in No broadcast Signal

If a broadcasting signal is not present for about 5-30 minutes, the set will be automatically turned off.

In AV mode, however, this function dose not operate.

RECALL

The RECALL button is used to display the current status: programme number, station name and clock.

This display appear for 5 seconds unless any button is pressed.

CHILD LOCK

You can prevent the use of the TV set without the remote control.

The set is child-locked after switching off the set by pressing the Y, C, TELETEXT(POWER button() in sequence on the remote control within 5 seconds.

The child-lock function is indicated by flashing the STAND-BY-INDICATOR.

The set can only be switched back on using the remote control.

TIME

Pressing the TIME button, the current time is displayed on the screen during 5 seconds.

If the programme you are watching has no Teletext transmission, no time will be displayed

TIMER CLOCK 12:20 WACKE UP TIME --:-- ACTIVATE YES WACK UP PROG P 45

TIMER CLOCK 12:20 WACKE UP TIME 07:00 ACTIVATE YES WACK UP PROG P 45

SWITCHING TELETEXT ON/OFF

Press the TELETEXT button (The index page viewed last will appear.

Press the TELETEXT button to return to the TV mode.

COLOUR BUTTONS IN TOP/FLOF TELETEXT

A red, green, yellow and blue field is shown at the bottom of the screen.

If TOP or FLOF teletext (FASTEXT) is transmitted by the station, pressing the corresponding colour button on the remote controller, you can select the desired page easily.

SELECTING PAGES

The NUMBER button 0..9 are used to enter a page number.

The selected page number appears at the top of the screen and the page appears after a short time.

The UP/DOWN buttons increase or decrease the current page number by 1.

INDEX PAGE

You can switch directly to the programme preview (with TOP text) or the overview page of the station you are currently viewing by pressing the INDEX (Button.

PAGE HOLD

Several sub pages can be combined under a page number and are scrolled at an interval determined by the television station.

The presence of sub pages is indicated by, for example, 3/6 beneath the time, which means that you are looking at the 3rd page of a total of 6 pages.

If you want to look at a subpage for a longer period of time, press the HOLD (Button.

The contents of the subpage shown are kept on the screen and no longer updated or switched to other subpages.

The HOLD symbol (☐) will be displayed on the top left hand side instead of the page no..

Pressing the HOLD button again, the current subpage appear.

CALLING UP SUBPAGE DIRECTLY

Pressing the SUBPAGE ( [button, "Page no./--"

appears at the bottom of the screen.

Enter the subpage number that you want to call up with the NUMBER button 0..9, for example, the 2nd page, sequence 0002. The desired subpage is sought and displayed. To exit, press SUBPAGE ( Ebutton again.

WATCHING TELEVISION DURING TELETEXT MODE

Some pages are continually update, for example, stock market reports, sports announcements, and the latest news.

If you want to watch television and stay informed at the same time, press CANCEL () button.

The regular programme is still visible and the teletext symbol () appears at the top of the screen.

Pressing the CANCEL button again, the teletext page appears with the update information.

REVEAL ANSWER

This function can be used on certain pages to reveal the solution of riddles.

Press the REVEAL button ( ) to reveal a hidden answer and press again to hide it.

DOUBLING CHARACTER SIZE

Repeatedly pressing the SIZE button ( ) doubles the character size in the following order: Upper half of the page-> Lower half of the page-> Return to normal size.

VOLUME AND BRIGHTNESS CONTROL IN TELETEXT MODE

Pressing the MENU button in teletext mode, the volume and brightness control menu will be displayed in the bottom of the screen.

You can adjust volume and brightness using the corresponding colour button on the remote controller.

©