LP 4235 - Printer Triumph-Adler - Free user manual and instructions

USER MANUAL LP 4235 Triumph-Adler

Woman in office chair working at a desk with computer monitors and documents (no visible text or symbols)

Bedienungsanleitung

LP 4235 | 4240 | 4245

White paper printer with blue control panel and beige base (no visible text or symbols)

Laserdrucker s/w

Inhaltsverzeichnis

GEEA (Group for Energy Efficient Appliances)

IBM Program License Agreement

THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE PROGRAMS ("PROGRAMS") WHICH BELONG TO INTERNATIONAL BUSINESS MACHINES CORPORATION ("IBM"). THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH THE SOFTWARE IS BEING LICENSED TO YOU BY IBM. IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS LICENSE, THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE YOU MAY RETURN THE DEVICE FOR A FULL REFUND. IF YOU DO NOT SO RETURN THE DEVICE WITHIN THE 14 DAYS, THEN YOU WILL BE ASSUMED TO HAVE AGREED TO THESE TERMS AND CONDITIONS.

The Programs are licensed not sold. IBM, or the applicable IBM country organization, grants you a license for the Programs only in the country where you acquired the Programs. You obtain no rights other than those granted you under this license.

The term "Programs" means the original and all whole or partial copies of it, including modified copies or portions merged into other programs. IBM retains title to the Programs. IBM owns, or has licensed from the owner, copyrights in the Programs.

1. License

Under this license, you may use the Programs only with the device on which they are installed and transfer possession of the Programs and the device to another party.

If you transfer the Programs, you must transfer a copy of this license and any other documentation to the other party. Your license is then terminated. The other party agrees to these terms and conditions by its first use of the Program.

You may not:

1. use, copy, modify, merge, or transfer copies of the Program except as provided in this license;
2. reverse assemble or reverse compile the Program; or
3. sublicense, rent, lease, or assign the Program.

2. Limited Warranty

The Programs are provided "AS IS."

THERE ARE NO OTHER WARRANTIES COVERING THE PROGRAMS (OR CONDITIONS), EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you.

3. Limitation of Remedies

IBM's entire liability under this license is the following;

For any claim (including fundamental breach), in any form, related in any way to this license, IBM's liability will be for actual damages only and will be limited to the greater of:

1. the equivalent of U.S. \$25,000 in your local currency; or
2. IBM's then generally available license fee for the Program

This limitation will not apply to claims for bodily injury or damages to real or tangible personal property for which IBM is legally liable.

IBM will not be liable for any lost profits, lost savings, or any incidental damages or other economic consequential damages, even if IBM, or its authorized supplier, has been advised of the possibility of such damages. IBM will not be liable for any damages claimed by you based on any third party claim. This limitation of remedies also applies to any developer of Programs supplied to IBM. IBM's and the developer's limitations of remedies are not cumulative. Such developer is an intended beneficiary of this Section. Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.

4. General

You may terminate your license at any time. IBM may terminate your license if you fail to comply with the terms and conditions of this license. In either event, you must destroy all your copies of the Program. You are responsible for payment of any taxes, including personal property taxes, resulting from this license. Neither party may bring an action, regardless of form, more than two years after the cause of action arose. If you acquired the Program in the United States, this license is governed by the laws of the State of New York. If you acquired the Program in Canada, this license is governed by the laws of the Province of Ontario. Otherwise, this license is governed by the laws of the country in which you acquired the Program.

Typeface Trademark Acknowledgement

Helvetica, Palatino and Times are registered trademarks of Linotype-Hell AG. ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC Zapf Dingbats are registered trademarks of International Typeface Corporation.

Monotype Imaging License Agreement

1. "Software" shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.

2. You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols ("Typefaces") solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.

3. To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.

4. You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.

5. This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested.

6. You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.

7. Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.

8. THE PARTIES AGREE THAT ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE EXCLUDED.

9. Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.

10. IN NO EVENT WILL MONOTYPE IMAGING BE LIABLE FOR LOST PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAUSED BY ABUSE OR MISAPPLICATION OF THE SOFTWARE AND TYPEFACES.

11. Massachusetts U.S.A. law governs this Agreement.

12. You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging.

13. Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).

14. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR REPRESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH PARTY. BY OPENING THIS DISKETTE PACKAGE, YOU AGREE TO ACCEPT THE TERMS AND CONDITIONS OF THIS AGREEMENT.

Open SSLeay License

Copyright © 1998-2006 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3 All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4 The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [e-mail].
5 Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
6 Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

Copyright © 1995-1998 Eric Young ([e-mail]) All rights reserved.

This package is an SSL implementation written by Eric Young ([e-mail]). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([e-mail]).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3 All advertising materials mentioning features or use of this software must display the following acknowledgment:
"This product includes cryptographic software written by Eric Young ([e-mail])"
The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-).
4 If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:
"This product includes software written by Tim Hudson ([e-mail])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

Compliance and Conformity

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The use of a non-shielded interface cable with the referenced device is prohibited.

CAUTION — The changes or modifications not expressly approved by the party responsible for compliance could void the userAfs authority to operate the equipment.

This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.

Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

* The above warning is valid only in the United States of America.

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured after August 1, 1976. Compliance is mandatory for products marketed in the United States. A label indicating compliance with the CDRH regulations must be attached to laser products marketed in the United States.

Ozononzentration

Energy Star (ENERGY STAR®) Program

300mm 300mm 200mm* 300mm 600mm

Diagram of a printer with numbered parts labeled for identification

Technical diagram of an open computer with numbered parts labeled 1, 2, 3, and 4

Diagram of an electronic device with numbered parts labeled 1 through 7, showing internal components and connectors.

Technical line drawing of a mechanical assembly with a green shaded component and dashed line indicating a curved path (no text or symbols)

Diagram of a mechanical device with a green sheet and an inset showing a rotating blade (no text or symbols)

Farbiges Papier

Legal A4 Letter B5 A5 A6

Illustration of hands installing or adjusting a green plastic device into a tray (no text or symbols visible)

Diagram showing a hand inserting a device into a device with a label 'A4' indicating a specific component.

Diagram showing a device with directional arrows indicating movement or change, alongside an inset image of a device on a surface.

Diagram of a mechanical or architectural layout with an inset showing a hand interacting with a component, labeled with directional arrows and symbols.

Diagram of a computer motherboard showing internal components and a magnified view of the keyboard mechanism (no text or labels)

Illustration showing two hand gestures: one holding a curved object with arrows indicating rotation, the other holding a rectangular block with motion arrows (no text or symbols)

Diagram illustrating a device's internal structure with a no-smoking symbol, showing part assembly and component placement.

Top-down schematic of a device layout with front, side, and top views (no text or symbols)

Technical line drawing of a device rear panel with internal components (no text or symbols)

Illustration of hands installing or adjusting a green electronic device into a folder (no text or symbols visible)

Diagram of a printer front panel with a magnified inset showing internal components (no text or symbols)

Two-step diagram showing hand positioning of a curved object with arrows indicating motion, no text or symbols present.

Diagram of a printer internal structure showing internal components and green printing process (no text or symbols)

Diagram of a printer's internal structure showing a green cover and black arrow indicating a downward motion (no text or symbols)

Illustration of hands operating a printer with a green cover and an upward arrow (no text or symbols)

Illustration of a printer's internal structure with a hand inserting a cable (no text or symbols)

Technical line drawing of a printer internal structure with two magnified views showing internal components (no text or symbols)

Illustration of hands inserting a green internal component into a computer case (no text or symbols visible)

Diagram showing a hand inserting a plug into an electrical outlet, with an arrow indicating the process.

C:\Users\Unread Laptop OS X 10.4 or higher Document OS X 10.4 or higher OS X 10.2 and 10.3 Only PDL Setup Realtime.txt

Enweiteroptionen 10.383.48.136 Options for this, also the Deutschen optionen are adopted by us, and is not widely used to use any information in a German Deutschen and optional Hardware found in the Deratuation of Deutschen. Options for this, also the Deutschen optionen are adopted by us, and is not widely used to use any information in a German Deutschen and optional Hardware found in the Deratuation of Deutschen. Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimize ISO/ISO code: Optimized: GBM Standard Abstruts: Fontalms

Status Monitor Symbol

Diagram of a printer internal structure showing top and bottom views with directional arrows indicating rotation (no text or symbols)

Diagram showing hands operating a printer with an arrow indicating process direction, including a magnified view of the device's screen.

Diagram of a mechanical component with a folded paper-like shape and internal mechanism (no text or symbols)

Illustration of hands holding a green cylindrical device with rotational arrows indicating motion (no text or symbols)

Illustration of a microwave oven with open door and internal air vent, showing a close-up view of the interior (no text or symbols)

Line drawing of a mechanical component with a green handle and circular top (no text or symbols)

Illustration of a container with a bottle inside, showing an arrow indicating flow or movement (no text or symbols present)

Line drawing of a mechanical component with a clip attached (no text or symbols)

Diagram showing a hand pressing a car seatbelt with an arrow indicating the motion direction, accompanied by explanatory text on the left.

Diagram of a printer internal structure showing internal components and directional arrows indicating rotation (no text or symbols)

Illustration of hands operating a printer with green paper being inserted (no text or symbols visible)

Line drawing of a printer's internal structure with a hand adjusting the lid (no text or symbols)

Illustration of hands using a computer to generate electronic components, showing internal structure and tool path (no text or symbols)

Diagram of a printer's internal structure with labeled parts and red circles highlighting features

Line drawing of a printer with a red circle highlighting a textured area on the cover (no text or symbols present)

Hand pressing down on a green paper sheet with a downward arrow (no text or symbols)

Illustration of two hands inserting a green paper into a printer, showing the process (no text or symbols present)

Line drawing of a printer with visible internal components and external frame (no text or symbols)

Diagram illustrating a process of printer press application, showing step-by-step assembly with arrows indicating action.

Illustration of hands operating a printer with green components and arrows indicating process flow (no text or symbols)

Diagram of a hand inserting a green component into a printer drawer (no text or symbols visible)

Illustration of hands inserting a green component into a printer holder (no text or symbols visible)

Illustration of hands operating a printer with a magnified inset showing internal components (no text or symbols)

Illustration of a printer's internal structure with a hand pressing a button (no text or symbols visible)

Illustration of hands installing or adjusting a green mechanical component inside a printer (no text or symbols visible)

Illustration of hands operating a computer monitor with a green panel and scroll (no text or symbols visible)

m = 311

1

•

2019年1月1日

(二)债券持有人类型

2.2报告期末股票明细

1. 2017年1月

(股东股东在管理委员会授权委托人

(No text)

100000000

二、债券投资组合情况

m = 311

图10-12

m = 311

1. 2017年1月1日

[Unreadable]

(1) 2017年1月1日

单位

(二)本次股东大会的召集和召开程序

m = 311

m = 311

在报告期内出现的负债和财产损失情况：

m = 311

2.2报告期末股东总数

(1) 2014年1月1日

三

(1) 本次股东大会

基金管理人负责投资研究工作

附

(No text)

表决结果：同意

(2) 本报告书全文

m = 311

请在填表中填写本表的填表中填到备注(

2019年1月1日

1.

√ 业绩考核综合评价

基金份额本报告期累计净值

1. 2018年1月1日

(1)

[Unreadable due to extreme pixelation and noise]

3.10.2

m = 311

(1) 本报告书 includes the following:

m = 311

2018年1月1日

特别提示性

m = 311

2.本报告期公司实现的利润及每股收益

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none should exist in the GT. Hence, the OCR result is inconsistent with the Ground Truth.

m = 311

(1)在2017年1月1日

m = 311

2.1.1 2017年

m = 311

m = 311

1. 本说明仅供参考。

2. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 99.

1 + u1 - 1 = ( 1 + u) u1 < 1 = u

(1) 本报告书的名称、地点和时间

表决结果：赞成9票反对0票弃权0票

(一) 2018年公司利润分配情况

Diagram showing mechanical assembly with labeled component 'A4' and magnified detail view

Line drawing of two hands holding a card (no text or symbols visible)

Illustration of a hand pressing down on a green device component with a right-hand arrow (no text or symbols)

Diagram illustrating the process of inserting a device into an open panel, with Chinese labels indicating component placement.

Diagram illustrating a device assembly process with labeled components and directional arrows indicating movement or assembly.

Line drawing of a desktop computer with front panel and drive bays (no text or symbols)

LP 4235

Line drawing of a multi-tiered computer tower with ventilation grilles and control panels (no text or labels)

LP 4240/LP 4245

CompactFlash (CF)-Karte

Technical line drawing of a mechanical assembly with no visible text or symbols

Technical line drawing of a mechanical device with a green component inserted, showing internal components and a directional arrow (no text or symbols)

Line drawing of a computer tower case with ventilation slots and control panel (no text or symbols)

LP 4235

Line drawing of a multi-tiered computer tower with ventilation grilles and control panels (no text or labels)

LP 4240/LP 4245

Weitere Optionen

High speed (max. 480 Mbit/s)

Full-Speed (max. 12 Mbit/s)

Stromversorgung

VCCI Class B, FCC Class B (U.S.), CE (Europe)

DHCP (Dynamic Host Configuration Protocol)

Administrator Passwort 7-68, 7-76, 7-81

Änderung 7-83

AES Einstellungen

SSL Server 7-73

Allgemeine Probleme

SSL (Secure Sockets Layer) Server 7-72

Status Monitor Symbol 4-21

Zugang 4-20

Status Monitor Symbol

Status Monitor 4-21