HIVE Podsie 3 - Headphones Niceboy - Free user manual and instructions

Product Type	True Wireless Earbuds
Model	Niceboy HIVE Podsie 3
Brand	Niceboy
Bluetooth Version	5.1
Frequency Band	2.4 GHz
RF Power	≤ 2.5 mW
IP Rating	IP54
Driver Size	∅8 mm
Frequency Range	20 Hz - 20 kHz
Sensitivity	110 dB ± 3 dB (1 kHz, 1 mW)
Impedance	16 Ω
Earphone Battery	Polymer, 60 mAh each
Charging Case Battery	Polymer, 500 mAh
Charging Time	2 hours
Maximum Battery Life	≥ 35 hours (combined)
Bluetooth Profiles	HFP, A2DP, AVRCP, SPP, PBAP
Bluetooth Codecs	AAC, SBC
USB Type	USB-C
Charging Port	USB-C (on case)
Controls	Multifunction button (play/pause, volume, track, call, voice assistant)
Voice Assistant	Yes (press three times)
App Support	Niceboy ION app (iOS/Android)
Factory Reset	Yes (press multifunction button three times in pairing mode)
Safety Information	Do not expose to extreme temperatures, fluids, or disassemble; avoid high volumes to prevent hearing damage.

Frequently Asked Questions - HIVE Podsie 3 Niceboy

How do I pair the earbuds with my phone?

Remove both earbuds from the charging case. They will automatically power on and pair with each other. The LED will flash blue and red. Open Bluetooth settings on your device and select Niceboy HIVE Podsie 3 from the list. Successful pairing is indicated by a sound and the LED turns off.

How can I perform a factory reset?

Turn off the earbuds and remove them from your device's Bluetooth list. Turn off Bluetooth. Power on the earbuds so they enter pairing mode (LED flashes blue/red). Press either multifunction button three times in a row. A sound indicates successful reset. Place earbuds back in the case, then take them out; they will pair automatically.

How do I charge the earbuds and the case?

Place the earbuds in the charging case; they will charge automatically. To charge the case, connect the included USB-C cable to the port on the case. The LED indicators on the case flash during charging and turn off when fully charged. Charging time is approximately 2 hours.

What is the battery life?

The combined battery life (earbuds + case) is ≥ 35 hours. The earbuds themselves have a battery capacity of 60 mAh each, and the case has 500 mAh.

Are the earbuds water-resistant?

Yes, the earbuds have an IP54 rating, meaning they are protected against dust and splashes of water. However, do not submerge them.

Can I use only one earbud?

Yes, you can use a single earbud. When you remove one earbud from the case, it will connect independently. The other earbud can be used later.

How do I control volume and tracks?

Press the right button twice to increase volume, and the left button twice to decrease. Press and hold the right button for next track, and the left button for previous track. Single press for play/pause or answer/hang up calls.

How do I answer or reject calls?

Press the multifunction button once to answer or hang up. Press and hold to reject an incoming call.

How do I connect to the Niceboy ION app?

Download the Niceboy ION app from the App Store or Google Play. Register or log in, then add a device. Ensure Bluetooth is enabled, and follow the in-app instructions to connect your earbuds.

What Bluetooth codecs are supported?

The earbuds support AAC and SBC codecs for high-quality audio streaming. They do not support aptX or LDAC.

USER MANUAL HIVE Podsie 3 Niceboy

PRVNÍ SPUŠTĚNÍ A PÁROVÁNÍ

BT profily: HFP,A2DP,AVRCP,SPP,PBAP

BT kodeky: AAC, SBC

USB typ: USB-C

Baterie nabíjecího boxu: polymer/500mAh

PRVÉ SPUSTENIE A PÁROVANIE

BT profily: HFP, A2DP, AVRCP, SPP, PBAP

BT kodeky: AAC, SBC

USB typ: USB-C

Replacement earphone tips

USB-C cable

Manual

PRODUCT DESCRIPTION

1. LED
2. Multifunction button
3. Input for charging
4. Output for charging
5. LED charging indicator
6. Battery charge level indication button
7. USB-C charging port

FIRST START-UP AND PAIRING

1. Remove both earphones from the charging box and remove the stickers protecting the earphones' charging pins (3).
2. Switch the earphones on by pressing and holding the multifunction button (2) on both earphones.
3. The earphones will switch on and pair with each other. Once the LED (1) starts to alternate between flashing blue and red, the earphones are ready for connection to Bluetooth.
4. Open Bluetooth settings on your device and search for „Niceboy HIVE Podsie 3“ in the list of available devices.
5. Successful pairing is indicated by a sound. The LED (1) will switch off.
   To reconnect to a device that has already been paired, simply remove the earphones from the box.
   They will switch on and connect to the device automatically.

SWITCHING ON AND OFF

To switch the earphones on, simply remove them from the charging box, or manually switch them on by pressing and holding both multifunction buttons (2). To switch them off, simply place the earphones in the charging box. They will automatically turn off and disconnect from your device. The earphones are placed in the box correctly when the LED (1) turns red. When the earphones are fully charged, the LED goes out.

To switch the earphones off, press and hold both multifunction buttons (2) for approx. 10 seconds.

MULTIFUNCTION BUTTON - BASIC CONTROLS

Press any button once - play/pause, answer call/hang up Press the right button twice - increase volume by one level Press the left button twice - decrease volume by one level Press and hold the right button - next song, reject call Press and hold the left button - previous song, reject call Press any button three times - activate voice assistant

CHARGING

To charge the box itself, plug the charging cable into the USB port (7). The LEDs (5) will flash during charging and turn off once the box is fully charged.

CONNECTING TO THE APP

1. Download the app by scanning the QR code using your mobile phone, or search for „Niceboy ION“ in the mobile app store and download the app.
2. Start the „Niceboy ION“ app and register a new account or sign in with your existing account.
3. Set the password and proceed to „Add device“.
4. Turn on Bluetooth; nearby devices will be detected based on the strength of the signal.
5. Press the „+“ button
6. Wait for connection
7. If the device was added successfully, "completed" appears on the screen
8. Your device is now successfully connected.

Note: Reset the earphones to factory settings before you pair them with any new device and connect them to the Niceboy ION app.

FACTORY RESET

In case of technical issues, reset the earphones to factory settings as follows.

1. Switch off the earphones, remove them from the list of paired devices and turn off Bluetooth.
2. Switch on the earphones so that they enter pairing mode. The LED alternates between flashing blue and red.
3. Press either of the multifunction buttons (2) three times in a row. Successful reset is indicated by a sound. The earphones will switch off.
4. Place both earphones in the charging box. Once removed from the box, the earphones will automatically turn on and pair with one another. The reset process is now complete.

PARAMETERS

BT version: 5.1

Frequency band: 2.4 GHz

Radio frequency power: ≤ 2.5 mW

IP rating: IP54

Battery in the earphone: polymer/60mAh*2

Speaker size: ∅8 mm

Frequency range: 20 Hz-20 kHz

Speaker sensitivity: 110 db±3 dB - 1 kHz 1 mW

Impedance: 16 Ω

BT profiles: HFP, A2DP, AVRCP, SPP, PBAP

BT codecs: AAC, SBC

USB type: USB-C

Charging box battery: polymer/500 mAh

Charge time: 2 hours

Maximum battery life: ≥ 35 hours

SAFETY INFORMATION

Listening to music at very high volume can damage your hearing. Do not expose the device to fluids or humidity. Do not expose the device to extreme temperatures or try to disassemble it. Protect the device from sharp objects and falls from height. Batteries - Improper handling (prolonged charging, short circuit, breakage by other objects, etc.) may result in fire, overheating or battery leakage.

The battery or accumulator that may be included with the product has a service life of six months, as it is a consumable.

Information on all frequency bands in which the radio equipment operates and intentionally transmits radio waves as well as the maximum radio frequency power transmitted in the frequency band in which the radio equipment is operated is included in the instructions and safety information.

The manual is available for download in electronic form at www.niceboy.eu in the support section. NICEBOY s.r.o. hereby declares that radio device type Niceboy HIVE Podsie 3 complies with Directives 2014/53/EU, 2014/30/EU, 2014/35/EU and 2011/65/EU. The full EU Declaration of Conformity is available at the following website: https://niceboy.eu/cs/podpora/prohlaseni-o-shode-mM38CtmYvX693lHvvu4CWpk3vjGrvnC

INFORMATION FOR USERS ON DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT (HOUSEHOLDS)

The above symbol on the product or accompanying documentation means that used up electrical or electronic products must not be disposed of as communal waste. To dispose of the product correctly, bring it to designated waste collection points, where it will be disposed of free of charge. Proper disposal of the product may preserve valuable natural resources and helps prevent potential negative impact on the environment and human health caused by improper waste disposal. For more information, contact local authorities or the nearest waste collection point. Improper disposal of this type of waste may result in a fine pursuant to national legislation.

Information for Users on Disposal of Electrical and Electronic Equipment (Corporate Use) To properly dispose of electrical and electronic equipment for corporate use, contact the manufacturer or importer of the product. They will provide you information on disposal methods for the product and will inform you on who is obligated to fund the disposal of the electrical device based on the date the product was put on the market. Information on Disposal in Countries outside the European Union The above symbol only applies in EU countries. To properly dispose of electrical and electronic equipment, request more information from your local authority or the seller of the product.

DE

LIEFERUMFANG

Ohrhörer Niceboy HIVE Podsie 3

Ladebox

Ersatz-Ohrstöpsel

USB-C Kabel

Anleitung

PRODUKTBESCHREIBUNG

ERSTE INBETRIEBNAHME UND PAIRING

BT Profile: HFP,A2DP,AVRCP,SPP,PBAP

BT Codecs: AAC, SBC

USB Typ: USB-C

PRVO POKRETANJE I UPARIVANJE

1. Izvadite obje slušalice iz kutije za punjenje i skinite naljepnice koje štite igle konektora za punjenje slušalica (3).
2. Uključite slušalice pritiskom i držanjem višenamjenskog gumba (2) na obje slušalice.
3. Slušalice će se uključiti i upariti jedna s drugom. Kad LED (1) počne naizmjenično treperiti plavom i crvenom bojom, slušalice su spremne za povezivanje na Bluetooth.
4. Otvorite Bluetooth postavke na svom uređaju i potražite „Niceboy HIVE Podsie 3” na popisu dostupnih uređaja.
5. Uspješno uparivanje označeno je zvučnim tonom. Isključuje se LED (1).
   Za ponovno povezivanje s već uparenim uređajem samo izvadite slušalice iz kutije. One će se automatski uključiti i povezati s uređajem.

UKLJUČIVANJE I ISKLJUČIVANJE

PIERWSZE URUCHOMIENIE I PAROWANIE

Profile BT: HFP, A2DP, AVRCP, SPP, PBAP

Kodery-dekodery BT: AAC, SBC

Typ USB: USB-C

PRVI VKLOP IN SEZNANJANJE

Profili Bluetooth: HFP, A2DP, AVRCP, SPP, PBAP

Kodeka Bluetooth: AAC, SBC

Tip USB: USB-C

Baterija polnilne škatlice: polimerna/500 mAh

PRIMA PORNIRE ŞI ASOCIEREA

Praha 4, Czech Republic, ID: 294 16 876.

Made in China.

RoHS CE 📄 📌 📋