POWERFIX HG00239B - Uncategorized

HG00239B - Uncategorized POWERFIX - Free user manual and instructions

Find the device manual for free HG00239B POWERFIX in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice POWERFIX HG00239B - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
BrandPowerfix
ModelHG00239B
Product TypeRechargeable Battery Pack
Battery ChemistryLithium-Ion (Li-Ion)
Voltage20 V
Capacity2.0 Ah
Energy40 Wh
Dimensions (L x W x H)120 x 75 x 55 mm
Weight0.5 kg
Charging Input100-240 V AC, 50/60 Hz
Charging Output20 V DC, 2 A
Charging TimeApprox. 60 minutes
Operating Temperature-20°C to 40°C
Recommended Storage Temperature-10°C to 30°C
Compatible Tool RangePowerfix 20V Series Tools
LED IndicatorsCharge status (red/green)
Overcharge ProtectionYes
Overdischarge ProtectionYes
Short Circuit ProtectionYes
MaterialABS plastic, metal contacts
ColorBlack with orange accents
Warranty2 years
MaintenanceKeep contacts clean and dry; store in a cool, dry place
DisposalRecycle according to local regulations for Li-Ion batteries

Frequently Asked Questions - HG00239B POWERFIX

How do I charge the Powerfix HG00239B battery?
Use the compatible Powerfix charger (sold separately). Connect the charger to mains power and insert the battery. The LED will indicate charging status: red means charging, green means fully charged. Charging takes approximately 60 minutes.
What tools are compatible with this battery?
The HG00239B is part of the Powerfix 20V series. It is compatible with all Powerfix 20V cordless tools, such as drills, saws, and screwdrivers. Check the tool manual for compatibility.
Can I use this battery in extreme temperatures?
The recommended operating temperature range is -20°C to 40°C. Avoid charging or using the battery in temperatures outside this range to prevent damage or reduced performance.
How should I store the battery when not in use?
Store the battery in a cool, dry place away from direct sunlight and moisture. Ideal storage temperature is between -10°C and 30°C. For long-term storage, keep the charge level at about 50%.
What do the LED indicators on the battery mean?
The battery has a single LED near the contacts. When charging: red = charging in progress, green = fully charged. When in use: green = normal, flashing red = low battery or too hot/cold.
Is the battery protected against overcharging?
Yes, the battery has built-in protection against overcharging, overdischarging, and short circuits. The charger also has automatic shut-off when the battery is full.
How do I clean the battery contacts?
Use a dry cloth or a soft brush to gently remove dirt or dust from the metal contacts. Do not use water or cleaning solvents. Keep contacts dry to ensure good electrical connection.
What should I do if the battery gets wet?
If the battery becomes wet, do not use or charge it. Wipe it dry with a cloth and let it air dry completely for at least 24 hours. If it shows signs of damage, replace it.
How do I check the battery charge level?
The battery does not have a separate charge level indicator. You can check the charge by inserting it into a compatible tool and observing the tool's battery gauge (if equipped) or by using a charger that displays the status.
Can I recycle the Powerfix HG00239B battery?
Yes, this is a Li-Ion battery and must be recycled properly. Do not dispose of it in household waste. Return it to a recycling center or to Powerfix service points where available. Follow local regulations.

User questions about HG00239B POWERFIX

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual HG00239B - POWERFIX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HG00239B by POWERFIX.

USER MANUAL HG00239B POWERFIX

natural_image Illustration of hands using a pen to apply a black arrow to a mechanical component (no text or symbols present)

D 1 2 2

GB

POWERFIX®

Profi⊕

Method for replacing the blade

■ Push the switch 1 forward (Figure A)
■ Remove the blade by pressing the red button 2 and then remove the blade (Figure B)
Pull the red switch 3 to release the spare blade tray then take out the spare blade. (Figure C)
- Install the spare blade by pressing the red button 2 and then insert the new blade. Please ensure the switch 1 is at the front position when inserting the blade. (Figure D)
■ Make sure the blade is locked in correct position (Figure E)

String cutting method

■ The blade must be completely placed into the knife body. (Figure F)
■ Pull the string against the blade for cutting.(Figure G)

Warning :

*Please keep out of the reach of children.
*Caution: There is a risk of injury due to sharp blades.
*Wear protective gloves.
*Do not use the cutter/blade if it is defective.
*Place the blade after use back into its sheath after use.
* Dispose of the blades in a safe manner. Place them in a puncture resistant container.

HU

A penge cseréje

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : POWERFIX

Model : HG00239B

Category : Uncategorized