Vibe1 - Loudspeaker Lamax - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Lamax
Model	Vibe1
Dimensions (W x H x D)	10.0 x 10.0 x 10.0 cm
Weight	300 g
Power Source	Built-in rechargeable Li-ion battery, USB-C charging
Battery Life	Up to 12 hours (at 50% volume)
Charging Time	Approx. 3 hours
Bluetooth Version	5.0
Wireless Range	Up to 10 meters
Output Power	10W RMS
Frequency Response	80 Hz – 20 kHz
Driver Size	52 mm
Water Resistance	IPX5 (splash-proof)
Controls	Power, Volume +/-, Play/Pause, Call Answer/End
Additional Features	Hands-free calling, TWS pairing, AUX input
Included Accessories	USB-C charging cable, user manual
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use liquids or abrasive cleaners.
Safety Warnings	Do not expose to extreme temperatures or drop. Keep away from water when charging.
Spare Parts Availability	Contact Lamax support for replacement battery and charging port.
Repair Information	Refer to authorized service centers. Do not disassemble yourself.
General Information	Compact speaker designed for outdoor and indoor use. Available in multiple colors.

Frequently Asked Questions - Vibe1 Lamax

How do I pair the Lamax Vibe1 with my phone?

Turn on the speaker and activate Bluetooth on your phone. Search for devices and select 'Lamax Vibe1'. Once connected, you will hear a confirmation tone.

What is the battery life of the Lamax Vibe1?

The built-in battery provides up to 12 hours of playtime at 50% volume. Actual battery life may vary depending on volume level and audio content.

Is the Lamax Vibe1 waterproof?

The speaker has an IPX5 rating, meaning it is splash-proof but not fully waterproof. Avoid submerging it in water.

How do I charge the Lamax Vibe1?

Use the included USB-C cable to connect the speaker to a USB power adapter or computer. The LED indicator will show red during charging and green when fully charged.

Can I use the speaker while it is charging?

Yes, you can use the speaker while it is charging, but this may extend the charging time.

Why is the volume low?

Check the volume level on both the speaker and your connected device. Ensure the speaker is not in a 'low power' mode. Also, make sure the audio source is not limited.

How do I reset the Lamax Vibe1?

If the speaker is unresponsive, press and hold the power button for 10 seconds until the LED flashes. This will reset the speaker to factory settings.

Can I pair two Lamax Vibe1 speakers together?

Yes, the speaker supports TWS (True Wireless Stereo) pairing. Turn on both speakers and double-press the play button on one to initiate pairing. They will connect automatically.

What should I do if the speaker does not turn on?

Ensure the speaker is charged. Connect it to a charger and wait a few minutes. If it still does not turn on, try a different cable or power source. If the issue persists, contact Lamax support.

How do I clean the Lamax Vibe1?

Use a soft, dry cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Keep the charging port dry and free from debris.

USER MANUAL Vibe1 Lamax

1	VOL -	Decrease volume (press), previous track / track start (hold)
2	VOL +	Increase volume (press), next track (hold),
3	PLAY	Play / Pause (press), Answer / end call (press), reject call (hold), redial the last dialled number (double tap)
4	POWER	Power on / off (hold)

LED Indicators:

- Ready to pair – flashes blue

- Paired - lit blue light

- Playback - flashes blue

- Low battery – flashes blue-red

- Charging - lit red light

- Fully charged – red light goes off

Power On / Off:

Press the POWER button to turn on the speaker. The indicator LED will illuminate and a beep sounds. Hold down the same button to turn off the speaker.

Pairing:

1. Turn on the speaker by holding down the POWER button. The LED light blinks blue and the speaker is ready for pairing.

2. Activate the Bluetooth connection on your phone or other device. In the list of available devices, select "LAMAX Vibe1". If a pairing code is required, enter "0000" and confirm. Upon successful pairing, the loudspeaker will emit a beep and the LED light will turn blue.

3. Hold down the button to reconnect. LED will begin to flash blue then repeat point 2.

Audio Input:

Plug the supplied audio cable into the AUX socket to play music from any device. When playing through the audio input, it is not possible to control the tracks directly on the speaker.

Handsfree:

When pairing your phone via Bluetooth, the handsfree function is activated. To answer / end the call press the PLAY button, to reject the incoming call by holding down PLAY and double-tapping PLAY to redial the last dialled number.

Charging:

The speaker can be charged using the supplied USB cable from a suitable USB device - adapter, PC, power bank. Do not charge the speaker with a higher input voltage than 5V, the speaker may be damaged. When the battery is close to being fully discharged the LED diode will begin flashing blue-red, it will remain red during charging and will switch off when fully charged.

Reset:

If the speaker stops responding, insert a paper clip (or other similar object) into the RESET socket and gently press the button into the socket. The speaker then turns off.

If there are pairing problems with older Android phones, press the RESET button in the same way and hold for a few seconds. The speaker switches off and reverts to factory settings.

Main Features:

- Total power of 12 W

- The two main speakers are complemented by passive transistors to produce the deep bass

- Bluetooth 4.2 with a range of up to 15 metres - Built-in 3000 mAh rechargeable lithium battery that can handle up to 12 hours on a single charge

- Built-in microphone for making calls comfortably. - Battery saving function – automatically switches off after 15 minutes without a paired device

Parameters:

Speaker Parameters	2 x 6 W,ø 45 mm,15Hz ~ 20 KHz
Battery	Li-Ion 3000 mAh
Playback Time	Up to 12 hours
Charging Time	3-4 hours (at 5 V / 1.5 A)
Bluetooth PlaybackOptions	Bluetooth,audio vstup 3.5 mm
Bluetooth Version	Bluetooth 4.2
Pairing Distance	Up to 15 metres
Handsfree	Integrated speaker and micro-phone, speaker controls
Dimensions	200 x 65 x 60 mm
Weight	380 g
Operating and Storage Temperature	-20°C ~ +50°C

The current version of user guide can be downloaded

from here:

https://beat.lamax-electronics.com/Vibe1/manuals

LAMAX VIBE1

Steuerungselemente: