Sentinel2 - Loudspeaker Lamax - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Lamax
Model	Sentinel2
Total Power Output	20 W (2 x 10 W)
Driver Size	48 mm each
Frequency Response	115 Hz - 15 kHz
Waterproof Rating	IP67 (immersion up to 1 m for 30 min)
Battery Type	Rechargeable Li-Ion 3600 mAh
Playback Time	Up to 24 hours
Charging Time	3 hours
Charging Port	USB-C
Wireless Technology	Bluetooth 5.0
Bluetooth Range	Up to 10 m (typical)
Audio Inputs	3.5 mm AUX, microSD card
Microphone	Yes (handsfree calling)
TWS Pairing	Yes (pair two identical speakers)
Dimensions	186 x 62 x 50 mm
Weight	525 g
Controls	Power, Volume +/-, Play/Pause, Mode
LED Indicators	Power on (white), charging (red), low battery (flashing red), Bluetooth pairing (flashing blue)
Accessories Included	USB-C cable, audio cable
Maintenance	Clean with a soft, dry cloth. Do not use harsh chemicals.
Safety	Do not charge with voltage higher than 5 V. Avoid exposure to extreme temperatures.

Frequently Asked Questions - Sentinel2 Lamax

How do I turn on the Lamax Sentinel2 speaker?

Press and hold the POWER button until the LED lights up and a beep sounds.

How do I pair the speaker with my phone via Bluetooth?

Turn on the speaker (LED flashes blue). On your phone, select 'LAMAX Sentinel2' from Bluetooth devices. If a code is needed, enter '0000'. Pairing is confirmed by a beep and steady blue LED.

How do I use the TWS function to pair two speakers?

Ensure both speakers are on and not paired to any device. On the main speaker, press and hold the MODE button until a beep. A second beep confirms pairing. The main speaker becomes the left channel. To unpair, hold MODE again.

How do I charge the speaker?

Use the included USB-C cable connected to a 5V USB adapter. The red light indicates charging; it turns off when fully charged. Do not use a voltage higher than 5V.

What are the battery life and charging time?

Playback up to 24 hours; charging time approximately 3 hours.

Can I play music from a microSD card?

Yes, insert a microSD card and press MODE to switch to microSD mode. Use the controls to play/pause and skip tracks.

How do I use the AUX input?

Connect a 3.5mm audio cable to the AUX jack. The speaker will automatically switch to line-in mode. You cannot control song playback from the speaker in this mode.

How do I make handsfree calls?

When connected via Bluetooth, press PLAY to answer/end a call, hold PLAY to reject, and double-tap PLAY to redial the last number.

Is the speaker waterproof?

Yes, it has an IP67 rating, meaning it can be submerged in up to 1 meter of water for 30 minutes. Ensure the charging port cover is closed tightly.

What should I do if the speaker is not working?

Try turning it off and on again. Ensure it is charged. If problems persist, contact Lamax support. There is no hard reset procedure.

USER MANUAL Sentinel2 Lamax

1	POWER	Turn on / off (hold)
2	VOL -	Decrease volume (press), previous track (hold)
3	PLAY	Play / pause (press)Answer / end call (press), reject call (hold),redial last called number (double tap)
4	VOL +	Increase volume (press), next track (hold)
5	MODE	Switch between Bluetooth, audio cable and microSD card (press)Switch TWS pairing on / off (hold)

Inputs:

6	AUX	For connecting audio cable
7	USB-C	For charging
8	Micro SD	For connecting microSD card

Others:

9	Power on indicator
10	Status indicator
11	Microphone

Main Features:

- Total power output of 20 W

• IP67 waterproofing
• Built-in 3600 mAh rechargeable lithium battery that lasts 24 hours on a single charge
• TWS for pairing with a second identical speaker

LED Indicators

Power On Indicators

- Speaker on – white light - Reaching minimum / maximum volume – blinks white

- Reaching minimum / maximum volume —Blinks white - Charging – red light, goes out when fully charged.

- Low battery – flashing red

Status Indicators

- Flashes blue while waiting to be paired and flashes blue during

- It lights blue when the multimedia device is connected in

stand-by

Power On / Off:

Hold the POWER button to turn the speaker on. The LED lights up and a beep sounds. Hold down the same button to turn the speaker off.

Pairing:

1. Press and hold the POWER button to turn the speaker on. The LED flashes blue and the speaker is ready to pair.

2. Activate Bluetooth connectivity on your phone or other device. Select „LAMAX Sentinel2“ from the list of available devices. If a pairing code is required, enter „0000“ and confirm. When pairing is successful, the speaker emits a beep and the LED lights up blue.

3. Playback can be controlled either with the paired device or directly on the speaker itself. While playing, the LED flashes blue

TWS:

To pair two speakers together, switch on both speakers and make sure they are not paired with any multimedia device. On one of them, which will act as the main one, press and hold the MODE button until you hear a beep. When pairing is successful, a second beep sounds and the main speaker acts as the left channel.

Unpair the speakers by holding down the same MODE button on the main speaker.

Audio Input:

Connect to the AUX jack via the supplied audio cable to play music from any device. It is not possible to control songs directly on the speaker when playing back through the audio input.

Handsfree:

The handsfree function is activated when you pair your phone via Bluetooth. Press PLAY to answer / end the call, hold down PLAY to reject the incoming call, and tap PLAY twice to redial the last number dialled.

Charging:

The speaker can be charged using the included USB cable plugged into a suitable USB device – adapter, PC, power bank. Do not charge the speaker with a higher input voltage than 5V, the speaker may be damaged. When the battery is running low, a beep sounds. When charging the light is red, and when fully charged the red light goes out.

Parameters:

Speaker Parameters	2 × 10 W, 48 mm,115 Hz - 15KHz
Battery	Li-Ion 3600 mAh
Playback Time	Up to 24 hours
Charging Time	3 hours
Playback Options	Bluetooth, 3.5mm audio, microSD card
Wireless Technology	Bluetooth 5.0
Waterproofing	IP67 – can withstand immersion up to 1m in standing water for 30 min.
Dimensions	186 × 62 × 50 mm
Weight	525 g

The current version of user guide can be downloaded from here: https://beat.lamax-electronics.com/Sentinel2/manuals/

CE RoHS

LAMAX SENTINEL2

Steuerungselemente:

multimedia with tryble stand by.

Upravljanje:

1	POWER	Uključivanje / Isključivanje (zadržavanje)
2	VOL -	Smanjivanje glasnoće (pritsnite), prethodna pesma (pritsnite i držite)
3	PLAY	Reprodukcija / pauza (pritsnuiti)Odgovor / prekid poziva (pritsnite), odbijanje poziva (pritsnite i zadržite), ponovno zvanje poslednjeg nazvanog broja (dva puta brzo pritsnite)
4	VOL +	Povećanje glasnoće (pritsnite), sledeća pesma (pritsnita i zadržite)
5	MODE	Prebacivanje između Bluetooth, audio kabla i micro SD kartice (pritsnite)Uključivanje / Isključivanje TWS uparivanje (pritsnite i držite)

Vstupy:

6	AUX	Za priključivanje Audio kabla
7	USB-C	Za punjenje
8	Micro SD	Za povezivanje micro SD kartice

Ostalo: