SWS 1500 - Thermometer SENCOR - Free user manual and instructions

Product Type	Thermometer Clock
Model	SWS 1500B, SWS 1500BU, SWS 1500GN, SWS 1500RD, SWS 1500W
Power Supply	1 x 1.5V AA battery (DC 1.5V)
Display	LCD digital display
Temperature Measuring Range	-10°C to 50°C (14°F to 122°F)
Temperature Accuracy	±1°C
Dimensions (approx.)	80 x 80 x 20 mm
Weight (without battery)	100 g
Functions	Indoor temperature measurement, time display, date display, alarm clock
Temperature Unit	Switchable between °C and °F
Battery Life	Approximately 12 months with normal use
Mounting	Stand or wall mount (keyhole)
Housing Material	Plastic
Cleaning	Wipe with a soft, dry cloth. Do not use abrasive cleaners.
Safety Precautions	Not a medical device. Keep away from water. Do not expose to direct sunlight.
Repair	No user-serviceable parts. Do not open the device. Contact authorized service.
Spare Parts	Battery only
Certification	CE compliant (EMC 2014/30/EU, RoHS 2011/65/EU)
Manufacturer	FAST ČR, a.s., Czech Republic

Frequently Asked Questions - SWS 1500 SENCOR

How do I set the time on the Sencor SWS 1500?

Press and hold the [SET] button for about 3 seconds until the hour digit flashes. Use the [UP] or [DOWN] buttons to adjust the hour, then press [SET] again to confirm and move to minutes. Repeat to set date, then press [SET] to exit.

How do I change the battery?

Open the battery compartment on the back of the device. Remove the old battery and insert a new AA 1.5V battery following the polarity markings. Close the compartment.

Can I use this thermometer outdoors?

No, the Sencor SWS 1500 is designed for indoor use only. It is not waterproof and should be kept away from moisture and direct sunlight.

Is the thermometer waterproof?

No, it is not waterproof. Avoid contact with water or high humidity. If the device gets wet, dry it immediately with a soft cloth.

How accurate is the temperature reading?

The accuracy is ±1°C in the range of -10°C to 50°C. For best results, place the thermometer away from heat sources and direct sunlight.

What does the arrow icon on the display mean?

The arrow indicates the temperature trend: up arrow means temperature is rising, down arrow means falling, and no arrow means stable.

How do I switch between Celsius and Fahrenheit?

Press and hold the [UP] or [DOWN] button for about 3 seconds to toggle between °C and °F. The unit will change on the display.

The display is dim or shows nothing. What should I do?

First, check if the battery is installed correctly and has sufficient charge. Replace the battery with a new AA 1.5V battery. If the problem persists, contact customer support.

Does this thermometer measure humidity?

No, the Sencor SWS 1500 only measures temperature and displays time. It does not have a humidity sensor.

What should I do if the thermometer does not turn on?

Ensure the battery is fresh and inserted correctly with correct polarity. Press the [RESET] button using a pointed object. If still not working, contact the store or manufacturer.

USER MANUAL SWS 1500 SENCOR

Declaration of Conformity

Product/ brand: Thermometer Clock/ SENCOR

Type/ model: SWS 1500B, SWS 1500BU, SWS 1500GN, SWS 1500RD, SWS1500W

DC 1,5V ("AA" battery)

Manufacturer: FAST ČR, a.s.

Černokostelecká 2111, 100 00 Praha 10, Czech Republic

VAT no: CZ26726548

This declaration of conformity is issued under the sole responsibility of the manufacturer.

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:

Directive EMC 2014/30/EU

Directive RoHS 2011/65/EU

The relevant harmonised standards and the other technical specifications:

EN 61326-1:2013

EN 61326-2-2:2013

EN 61000-6-1:2017

EN 61000-6-3:2007+A1

CE

Place of issuance: Prague

Chairman of the Board

Name: Ing. Zdeněk Pech

Date of issuance: 1.2.2018

Signature:

FAST" FAST CR, a.s.