KX-TGA685EX - Phone PANASONIC - Free user manual and instructions

Name: KX-TGA685EX
Brand: PANASONIC
Rating: 9.5 (104 reviews)

Find the device manual for free KX-TGA685EX PANASONIC in PDF.

📄 60 pages

EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs

View the manual :

Pick your language and provide your email: we'll send you a specifically translated version.

This manual is not available in your language

Desired language Your email address

Product type	Digital cordless additional handset
Brand	Panasonic
Model	KX-TGA685EX
Dimensions (approx.)	16 x 4.5 x 2.5 cm
Weight (with batteries)	Approx. 120 g
Power supply	AC adapter 220-240 V, 50/60 Hz (PNLV233CE); Rechargeable Ni-MH AAA 1.2 V batteries
Main functions	Additional handset, base registration, screen display, language selection, battery charging, charge indication
Compatibility	Panasonic cordless digital phone series (corresponding models)
Supplied accessories	Charger, AC adapter, 2 rechargeable batteries, handset cover
Battery life	Full charge in approximately 7 hours
Maintenance and cleaning	Clean with a soft damp cloth; do not use benzene, thinner or abrasive powder
Safety	Do not expose to rain or moisture; use only the supplied adapter; use only Ni-MH AAA batteries; do not incinerate
Spare parts and repairability	Replacement batteries (Ni-MH AAA); AC adapter PNLV233CE; charger; handset cover
General information	Manual available in multiple languages; consumer support: 08 92 35 05 05 (France); after-sales service: 01 70 48 91 73

Frequently Asked Questions - KX-TGA685EX PANASONIC

How to register the handset to the base?

Place the handset on the charger, press the key, then on the base, hold down the ••• key for about 5 seconds. Wait for the confirmation tone.

Which batteries to use?

Use only the supplied Ni-MH rechargeable AAA (R03) batteries. Do not use alkaline, manganese, or Ni-Cd batteries.

How to change the display language?

Press #110, then select the desired language using the ▲/▼ keys and confirm with OK.

What to do if the handset does not charge?

Check that the batteries are correctly installed and the contacts are clean. If the problem persists, try another compatible charger.

The handset displays 'Wait 1 minute', what to do?

This is normal if the handset has not been registered yet. Place it on the charger and wait for the registration to complete.

How to clean the handset?

Clean the exterior with a soft damp cloth. Do not use benzene, thinner or abrasive powder.

Can I use batteries not supplied?

No, use only Panasonic-recommended Ni-MH AAA rechargeable batteries (see the base manual).

Where to find after-sales service?

In France, contact 01 70 48 91 73 (non-premium rate number) or consumer service at 08 92 35 05 05 (€0.34/min).

How to dispose of the device at end of life?

Do not throw the device or batteries in household waste. Dispose of them at a collection point in accordance with local regulations.

Is the handset compatible with my existing base?

This handset is compatible with Panasonic cordless digital phone series. Check the list of compatible models in the base manual.

User questions about KX-TGA685EX PANASONIC

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

No questions yet. Be the first to ask one.

Download the instructions for your Phone in PDF format for free! Find your manual KX-TGA685EX - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KX-TGA685EX by PANASONIC.

USER MANUAL KX-TGA685EX PANASONIC

Additional Digital Cordless Handset

Model No. KX-TGA685EX

PANASONIC KX-TGA685EX - 1

natural_image

Line drawing of a mobile phone with keypad and front panel (no text or symbols)

Thank you for purchasing a Panasonic product.

This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone:

- KX-TG6851/KX-TG6861

(The corresponding models are subject to change without notice.)

You must register this handset with your base unit before it can be used.

This installation manual describes only the steps needed to register and begin using the handset. Please read the base unit's operating instructions for further details.

Please read this installation manual before using the unit and save it for future reference.

English/Português

Français/Deutsch

Italiano/Nederlands

Español/Useful Information

Installation

Accessory information

Supplied accessories

Accessory item/Part number Quantity
Charger 1
AC adaptor/PNLV233CE 1
Rechargeable batteries^*1	2
Handset cover^*2	1

*1 Please read the base unit's operating instructions for replacement battery information.

*2 The handset cover comes attached to the handset.

Note:

Please read the base unit's operating instructions for additional/replacement accessories.
Panasonic Corporation declares that the radio equipment type (KX-TGA685) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.ptc.panasonic.eu/compliance-documents
Please read "Ecodesign information" of the base unit's operating instructions for information regarding ErP directive.

Setting up

Connections

① Connect the AC adaptor plug to the unit until you hear a click.
② Connect the AC adaptor to the power outlet.

Diagram showing connection between a printer and a power adapter with labeled parts ① and ②

Note:

Use only the supplied Panasonic AC adaptor PNLV233CE.
The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

Battery installation/Battery charging

When the language selection is displayed after installing the batteries for the first time, you can select your desired language.

[◆]: Select your desired language. → [OK] → [💡]

Important:

Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted in the base unit's operating instructions.
USE ONLY rechargeable Ni-MH batteries AAA (R03) size Ⓐ.
Do NOT use alkaline/manganese/Ni-Cd batteries.
Confirm correct polarities (+, ⊕)

Charge for about 7 hours.

Confirm "Charging" is displayed (B).
When the batteries are fully charged, "Fully Charged" is displayed.

Installation

Diagram showing a hand holding a remote control via device A, followed by a close-up of the internal component and then a mobile phone with labeled parts B.

Note:

The handset display may show "Please wait for 1 minute." when the handset is placed on the charger if it is not registered to the base unit.
If the batteries are fully charged, but the operating time seems to be shorter, clean the battery ends (+), and the charge contacts with a dry cloth and charge again.

Display language

1【■】#110

2 [◆]: Select your desired language. → [OK] → [💡]

Registering the handset to the base unit

Ensure that the handset is switched on. If it is not on, press and hold [💡] for few seconds to turn the handset on.

1 Handset:

Lift the handset and press [💡].

2 B ase unit:

Press and hold [●●●] for about 5 seconds.

- If all registered handsets start ringing, press ⌘) again to stop, then repeat this step.

3 Handset:

Place the handset on the base unit or charger.

- Continue the operation even when the handset display shows "Please wait for 1 minute.".

4 With the handset still on the base unit or charger, wait until a confirmation tone sounds and Y is displayed.

Installation

Note:

- If an error tone sounds, or if y is displayed, register the handset according to the base unit's operating instructions.

For your safety

To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product.

PANASONIC KX-TGA685EX - For your safety - 1

WARNING

Power connection

Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.
Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.
Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact an authorised service centre.

Installation

To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.
Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
Do not place the handset on the base unit when battery cover is removed.

PANASONIC KX-TGA685EX - Installation - 1

CAUTION

Installation and location

- The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.

Battery

- We recommend using the supplied batteries or additional/replacement batteries noted in the base unit's operating instructions for replacement battery information. USE ONLY rechargeable Ni-MH batteries AAA (R03) size.

Installation

Do not mix old and new batteries.
Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.
Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual.
Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode.
Avoid the use in the following conditions:
– High or low extreme temperatures during use, storage or transportation.
Replacement of a battery with an incorrect type that can defeat a safeguard.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
Extremely high temperature and/or extremely low air pressure that can result in an explosion or the leakage of flammable liquid or gas.

Important safety instructions

When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

Other information

The applied nameplate is located at the bottom or rear of the product.
Operating the product near electrical appliances may cause interference. Move away from the electrical appliances.

⚠️CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

Installation

Routine care

Wipe the outer surface of the product with a soft moist cloth.
Do not use benzine, thinner, or any abrasive powder.

Notice for product disposal, transfer, or return

- This product can store your private/confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product.

Disposal of Old Equipment and Batteries (Only for European Union and countries with recycling systems)

Diagram showing two labeled cross-shaped containers with symbols, marked as ① and ②, likely illustrating a recycling or waste management concept.

These symbols (①, ②) on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment. For more information about collection and recycling, please contact your local authority. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union

These symbols (①, ②) are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

Installation

Note for the battery symbol

This symbol (②) might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.