SOLAC CT8625 - Electric Blanket / Heating Pad

CT8625 - Electric Blanket / Heating Pad SOLAC - Free user manual and instructions

Find the device manual for free CT8625 SOLAC in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SOLAC CT8625 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Electric Blanket / Heating Pad
Brand Solac
Model CT8625
Dimensions 160 x 130 cm (blanket) or 40 x 30 cm (pad)
Weight Approx. 1.5 kg
Power Supply 220-240 V ~ 50/60 Hz
Power Consumption 100 W
Material Microfiber outer, soft fleece inner
Temperature Settings 6 levels (30°C - 65°C)
Auto Shut-Off 3 hours (default)
Overheat Protection Yes
Control Type Handheld remote with LED display
Machine Washable Yes (remove controller before washing)
Detachable Power Cord Yes
Safety Certifications CE, RoHS
Warranty 2 years

Frequently Asked Questions - CT8625 SOLAC

How do I clean the Solac CT8625 electric blanket?
Unplug the blanket and detach the controller. Machine wash on a gentle cycle with cold water. Do not use bleach or fabric softener. Air dry flat, do not wring or tumble dry.
What is the maximum temperature of the heating pad?
The maximum surface temperature is approximately 65°C (149°F) on the highest setting.
Can I use the blanket overnight?
The blanket has an auto shut-off feature that turns it off after 3 hours for safety, making it suitable for overnight use.
How many heat settings does the CT8625 have?
It offers 6 heat levels, ranging from low (30°C) to high (65°C), controlled via the remote.
Is the electric blanket safe for people with sensitive skin?
Yes, the soft microfiber fabric is gentle on skin, and the even heat distribution prevents hot spots.
Can I use the heating pad as a cushion?
Yes, the CT8625 can be used either as a flat blanket or folded/rolled to function as a heating cushion.
What does the remote display show?
The LED display shows the current temperature setting and a timer indicator. It also alerts you if the blanket is overheated.
How long is the power cord?
The power cord is approximately 2 meters long, allowing flexible placement.
Does the blanket have a warranty?
Yes, the Solac CT8625 comes with a 2-year warranty covering manufacturing defects.
Can I wash the blanket with the controller attached?
No, always disconnect the controller before washing. The controller is not waterproof. Wash only the textile part.

User questions about CT8625 SOLAC

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Electric Blanket / Heating Pad in PDF format for free! Find your manual CT8625 - SOLAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CT8625 by SOLAC.

USER MANUAL CT8625 SOLAC

Both these instructions carefully define using the application

This manual is an integral part of the product. Keep it in a safe place for future reference.

IMPORTANT SAFEGUARDS

Important instructions. Retain for future use

- Important instructions. Retain for future use.

- This appliance is an overblanket, it's intended to be

used over the occupant

This appliance is not for professional or industrial or

- This appliance is not for professional or industrial or

medical/hospital use, it is intended for household use

only.

This assurance must not be used by anyone's income?

- This appliance must not be used by persons insensiti-

ve to heat or other vulnerable persons who are unable

to react to overheating

to read to overheating.

- Children under the age of three are not to use this

appliance due to their inability to react to overheating

This appliance is not to be used by young children.

- This appliance is not to be used by young children

over the age of three unless the controls have been

pre-set by a parent or guardian, or unless the child

pro set by a parent of guardian, or unhood the child has been adequately instructed on how to operate the

has been adequately instructed on how to operate the

controls safety

This appliance can be used by children aged from 8

This appliance can be used by children aged from 6

years and above and persons with reduce physical,

sensory or mental capabilities or lack of experience

2.1.1.1.2.3.4.5.6.7.8.9.10.11.12.13.14.15.16.17.18.19.20.21.

and knowledge if they have been given supervision or

instruction concerning use the appliance in a safe way

and understand the hazards involved.

and understand the hazards involved.

- Cleaning and user maintenance shall not be made by

children unless they are supervised

This appliance is not a low. Children should be owned.

- This appliance is not a toy. Children should be supervi-

sed to ensure that they do not play with the appliance.

Do not insert pins

- Do not insert pins

Do not use on adjustable bed

. Only use the appliance with the specific detacha-

able control unit provided (Type/model marked on the

ble control unit provided (Type/model marked on the

appliance)

Do not store the appliance if it is still hot: allow it to cool

Do not store the appliance in this suit not, allow it to cool down before folding.

down before folding.

. Do not crease the appliance by placing items on top of

it during storage

It during storage

- Examine the appliance frequently for signs of wear or

damage. If there are such signs, if the appliance has

been achieved or does not work it to the expiration

been misused or does not work, return it to the supplier

before switch it on again.

Do not use if wet

- Do not use if wet If the connection is destroyed it must be replaced. Solve

- If the connection is damaged it must be replaced. Take

the appliance to an authorized Technical Assistance

Service. Do not try to dismantle or repair without assic-

Service. Do not try to dismantle or repair without assistance.

tance, as this may be dangerous.

. When not in use store as explained in "STORAGE"

Remove the control before washing. The control must

- Remove the control before washing. The control must

never be submerged in water.

- Do not use any parts or accessories not supplied or recommended by SOLAC.

Before plugging the appliance into the mains, check that the indicated voltage is the same as in your home. Always unplug the appliance after use and before assembling or removing parts, and performing any

maintenance or cleaning operations. Also unplug it in the case of a power cut; The appliance must be

- Switched on before plugging or unplugging it into the stairs - Never pull the cord or use it to hang up the appliance. Always unplug the appliance by pulling the connec-

tion pin, and not the cord. • Make cross the cord sheet and come info content with share details or full conditions. Do not leave the cord

Hinge said the boss does not come into contact with sharp fingers or hot smiracles. DO NOT lease the boss hanging over the edge of a table or workshop, to prevent children from pulling it and causing the appliance

to fail. - Remove all elements from the inside or outside of the appliance used for protection during transport or fire

Tensions for customers with the trade or substance in the application used for professional hosting management for sales promotions, such as paper or plastic bags, plastic sheets, cardboard and stickers.

DO NOT use Real Data table, except, if default or default recipients do waiting water. It is taken into water, do NOT try to pick it up. Unplug it immediately.

C. 10.1.2017

The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "\_\_\_\_", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Since the OCR output incorrectly rendered a stylistic line as underscores (which should be ignored), this violates the rule. Therefore, the OCR result is inconsistent with the Ground Truth.

3 = Hohe Temperatur (V

The following table provides the information obtained from the

INSTRUCÕES IMPORTANTES.

2.1.12, 2023 and 2024

Fota averages n% days on 10 weeks post-2019.

2.1.3.4.5.6.7.8.9.10.11.12.13.14.15.16.17.18.19.20.21.22.23.24.25.26.27.28.29.30.31.32.33.34.35.36.37.38.39.40.41.42.43.44.45.46.47.48.49.50.51.52.53.54.55.56.57.58.59.60.61.62.63.64.65.66.67.68.69.70.71.72.73.74.75.76.77.78.79.80.81.82.83.84.85.86.87.88.89.90.91.92.93.94.95.96.97.98.99.100

the State Hospital of England on the transatlational list

Non-years in latti versolabili

SOLAC CT8625 - The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "\_\_\_\_", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Since the OCR output incorrectly rendered a stylistic line as underscores (which should be ignored), this violates the rule. Therefore, the OCR result is inconsistent with the Ground Truth. - 1

vat na přehřátí.

In this case, we will be able to provide a system of data and the results. The world's system provides us

inductive premie but' appearance up vode.

  1. Residual system prediction system rate system speed

UPOZORNENIE! Ak choeste pristroj odstnámíć, NIKOY ho neryhadzujla do odpadu. Odneste ho na

TOMMOKE GOAS CT6630 (Summary)

Nordita (0) 320-340

The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "\_\_\_\_", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Since the OCR output incorrectly rendered a stylistic line as underscores (which should be ignored), this violates the rule. Therefore, the OCR result is inconsistent with the Ground Truth.

The image is too blurry to recognize any text content.

  1. 2014, the period and price changes per ton

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

dots

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SOLAC

Model : CT8625

Category : Electric Blanket / Heating Pad