Scarlett

SC-EK21S12 - Kettle Scarlett - Free user manual and instructions

Find the device manual for free SC-EK21S12 Scarlett in PDF.

📄 11 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Scarlett SC-EK21S12 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeElectric Kettle
BrandScarlett
ModelSC-EK21S12
Voltage~220-240 V / 50 Hz
Power Consumption1800-2000 W
Maximum Capacity1.8 L
Minimum Capacity0.8 L
Net Weight0.8 kg
Gross Weight0.93 kg
Body MaterialPlastic (white)
Handle MaterialPlastic (black)
Heating Element MaterialStainless steel
Cord LengthApprox. 0.75 m
Automatic Shut-OffYes
Boil-Dry ProtectionYes
Indicator LightYes (illuminates when on)
Lid TypePush-button opening
FilterRemovable (inside spout)
Cord StorageYes (under base)
Base Type360-degree rotational
ColorWhite with black handle
Included AccessoriesBase unit with cord storage
Care InstructionsDescale regularly with citric acid or descaling agent

Frequently Asked Questions - SC-EK21S12 Scarlett

How to remove the smell from a new kettle?
Before first use, boil water with the juice of 1-3 lemons or a pack of citric acid. Leave the solution in the kettle for 12 hours, then boil again. Empty and rinse thoroughly with flowing water.
What are the minimum and maximum water levels?
The minimum water level is 0.8 L (marked MIN) and the maximum is 1.8 L (marked MAX). Do not overfill or underfill to avoid damage.
Why does the kettle turn off before the water boils?
This may be due to limescale buildup or insufficient water. Clean the kettle with a descaling agent and ensure the water level is above the MIN mark.
How to clean the kettle?
Unplug the kettle and let it cool. Wipe the outside with a soft damp cloth and dry. For the interior, descale regularly using a descaling agent or a mixture of water and lemon juice.
Can I use the kettle to heat other liquids?
No, the kettle is designed for heating water only. Using it for other liquids may damage the appliance and void the warranty.
What to do if the kettle does not turn on?
Check that the plug is securely connected to the power supply and that the base is dry. If the kettle has been switched on empty, allow it to cool for 10 minutes before refilling and trying again.
How to descale the kettle?
Use a commercial descaling product following its instructions, or boil water with citric acid/lemon juice. For heavy scale, leave the solution overnight, then boil and rinse thoroughly.
Is the kettle safe if it boils dry?
Yes, it has a boil-dry protection that automatically switches off the heating element. Let the kettle cool for 10 minutes before refilling with water.
How to store the power cord?
The cord can be wrapped around the base unit's cord storage compartment for neat storage.
Where can I get replacement parts or service?
Contact the nearest authorized service center for repairs or replacement parts. Do not attempt to repair the kettle yourself.

User questions about SC-EK21S12 Scarlett

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Kettle in PDF format for free! Find your manual SC-EK21S12 - Scarlett and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SC-EK21S12 by Scarlett.

USER MANUAL SC-EK21S12 Scarlett

natural_image Exterior view of a modern SCARLETT water heater with black handle and white lid (no text or symbols on body)

www.scarlett.ru

GB DESCRIPTION

  1. Base unit with cord storage compartment
  2. Body
  3. Spout
  4. Filter
  5. Lid
  6. Lid open handle
  7. On/Off switch
  8. Handle
  9. Indicator light

UA ОПИС

~220-240 V / 50 Hz1800-2000 W1.8L0.8 / 0.93 kgmm

GB INSTRUCTION MANUAL IMPORTANT SAFEGUARDS

- Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid damage due to incorrect use.

- Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.

- Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.

- Always unplug the appliance from the power supply when not in use.

- For home use only. Do not use for industrial purposes.

- Keep the base unit away from water and protect from splashes.

- Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.

- Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged. In such cases take the appliance to a qualified specialist for check and repair if necessary.

- Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.

- To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.

- Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under curtains and shelves.

- Do not leave the appliance unattended when in use.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.

- Never take the kettle from its base while in operation. Switch the appliance off first.

- ATTENTION: Do not open the lid while water is boiling.

- Close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and the hot water may overflow.

- The kettle is for heating water only, not for any other purposes and liquids.

- Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.

- If the product has been exposed to temperatures below 0^ C for some time it should be kept at room temperature for at least 2 hours before turning it on

- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

- Production date mentioned on the unit and/or on the packing materials and documentations.

BEFORE USING FOR THE FIRST TIME

- To remove the foreign smell from the new unit before the first use boil the water with added juice of 1-3 lemons or a pack of citric acid.

- Leave the fluid in the unit for 12 hours, then boil again.

- Empty the kettle and rinse it thoroughly with flowing water.

- Repeat the procedure if necessary.

INSTRUCTION FOR USE

FILLING

- Remove the kettle from the base unit.

- You can fill the kettle with water via the spout or neck with opened lid.

- Do not fill the kettle with less than 0.8 l of water (less than "MIN" mark) to prevent it from operating dry and more than 1.8 l (up to "MAX" mark) to avoid overfilling and water spilling out during the boiling.

SWITCHING ON

• After filling with water, place the kettle on the base unit.

- Connect the plug to the power supply and push On/Off switch. The appliance will turn on and indicator will light.

SWITCHING OFF

- When water begins to boil, the kettle will switch off automatically and indicator light will go off.

- NOTE: This appliance has a safety system, which automatically switches heating element off if the appliance inadvertently has been switched on when empty, or if it operates dry. In this case let the appliance cool down 10 minutes before filling with water again.

SWITCHING ON AGAIN

- If the kettle has been switched off automatically, it can be switched on again after cooling for 15-20 seconds.

CARE AND CLEANING

  • Open the lid and pour out the water through the orifice.
  • Always remove the plug from the socket and let the appliance cool down completely.
  • Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry cloth. Do not use any abrasive materials.
  • Remove scale regularly, using special descaling agents, available at the market, following given instructions.

STORAGE

  • Switch off and unplug the appliance; let it entirely cool.
  • Complete all requirements of Chapter CLEANING AND CARE.
  • The cord can be wrapped around the base area for storage.
  • Keep the appliance in a dry cool place.

Scarlett SC-EK21S12 - STORAGE - 1

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units and battery's should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.

For additional information about actual system of the garbage collection address to the local authority. Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Scarlett

Model : SC-EK21S12

Category : Kettle