SC-1025 - Kettle Scarlett - Free user manual and instructions

Product Type	Electric Kettle
Brand	Scarlett
Model	SC-1025
Capacity	0.5L (MIN) - 2L (MAX)
Power Supply	220-240V ~ 50/60Hz (estimated typical)
Power Consumption	2200W (estimated typical)
Auto Shut-off	Yes, when water boils
Boil-Dry Protection	Yes, automatic switch-off if empty
Indicator Light	Illuminates when heating
Filter Type	Removable scale filter
Cord Storage	Integrated compartment in base
Lid Operation	Manual open via handle
On/Off Switch	Push button with indicator
Safety Features	Auto shut-off, boil-dry protection, lid must be closed
Care and Cleaning	Wipe with soft damp cloth; descale regularly using descaling agents
Filter Cleaning	Remove and rinse under water; brush gently

Frequently Asked Questions - SC-1025 Scarlett

How do I clean the kettle?

Unplug the kettle and let it cool completely. Wipe the outside of the kettle and the base unit with a soft damp cloth, then dry with a dry cloth. Do not use abrasive materials. For internal cleaning, refer to descaling instructions.

How do I descale the kettle?

Remove scale regularly using special descaling agents available on the market. Follow the instructions provided with the descaling product. Alternatively, boil a mixture of water and vinegar or citric acid, then rinse thoroughly.

Why does the kettle turn off before the water boils?

If the kettle is switched on empty or without enough water (below the MIN mark), the boil-dry protection will automatically shut it off. Let it cool for 10 minutes before refilling with water. Also ensure the lid is closed properly.

Can I boil other liquids besides water?

No, the kettle is designed for heating water only. Do not use it for other liquids or purposes.

What does the indicator light mean?

The indicator light illuminates when the kettle is heating. It turns off automatically when the water boils and the kettle switches off.

How do I store the power cord?

The cord can be wound into the cord storage compartment located in the base unit. Ensure the appliance is unplugged and cool before storing.

Is it safe to open the lid while boiling?

No, do not open the lid while water is boiling to avoid burns from steam. Wait until the kettle has switched off and cooled slightly.

What should I do if the kettle doesn't turn on?

Check that the plug is properly connected to the power supply. Ensure the lid is closed securely and the kettle is placed correctly on the base. If still not working, let it cool if boil-dry protection activated. If problems persist, contact a qualified technician.

How do I install the removable filter?

Insert the filter into the spout opening until it clicks into place. To remove, gently pull it out. Clean it periodically by rinsing under water and brushing gently.

What is the boil-dry protection?

The boil-dry protection is a safety feature that automatically switches off the heating element if the kettle is accidentally switched on empty or runs dry. Let the appliance cool for 10 minutes before refilling.

USER MANUAL SC-1025 Scarlett

Line drawing of a simple electric kettle with handle and spout (no text or symbols)

www.scarlett.ru

GB DESCRIPTION

1. Base unit with cord storage compartment
2. Body
3. Spout
4. Lid
5. Lid open handle
6. On/Off switch
7. Indicator light
8. Handle
9. Removable filter

GB INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

- Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid damage due to incorrect use.

- Before the first switching on check that the voltage indicated on the rating label corresponds to the mains voltage in your house.

- Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.

- For home use only. Do not use for industrial purposes.

• Always unplug the appliance from the power supply when not in use.

- Keep the base unit away from water and protect from splashes.

- Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.

- Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged. In such cases take the appliance to a qualified specialist for check and repair if necessary.

- Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.

- To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.

- Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under curtains and shelves.

- Do not leave the appliance unattended when in use.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.

- Never take the kettle from its base while in operation. Switch the appliance off first.

- ATTENTION: Do not open the lid while water is boiling.

- Close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and the hot water may overflow.

- The kettle is for heating water only, not for any other purposes and liquids.

- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

BEFORE USING FOR THE FIRST TIME

- Remove all packing materials.

- Fill the kettle with cool water up to the maximum level mark and boil it. Empty the kettle. Repeat this operation. The appliance is ready for use.

INSTRUCTION FOR USE

FILLING

- Remove the kettle from the base unit.

- You can fill the kettle with water via neck with opened lid.

- There are "MIN" and "MAX" water level marks inside the kettle.

- Do not fill the kettle with less than 0.5 l of water (less than "MIN" mark) to prevent it from operating dry and more than 2 l (up to "MAX" mark) to avoid overfilling and water spilling out during the boiling.

SWITCHING ON

• After filling with water, place the kettle on the base unit.

- Connect the plug to the power supply and push On/Off switch. The appliance will turn on and the indicator will light.

SWITCHING OFF

- When water begins to boil, the kettle will switch off automatically and indicator light will go off.

- NOTE: This appliance has a safety system, which automatically switches heating element off if the appliance inadvertently has been switched on empty, or if it operates dry. In this case let the appliance cool down for 10 minutes before filling with water again.

SWITCHING ON AGAIN

- If the kettle has been switched off automatically, it can be switched on again after cooling for 15-20 seconds.

CARE AND CLEANING

- Open the lid and pour water out through the orifice.

- Always remove the plug from the socket and let the appliance cool down completely.

- Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry cloth. Do not use any abrasive materials.

- Remove scale regularly, using special descaling agents, available at the market, following given instructions.

FILTER CLEANING

- Remove the filter out of the kettle.

- Place it under a jet of water and rub gently with a soft brush (not included).

- Return the filter to its place.

STORAGE

- The cord could be winded into a cord storage compartment provided in the base unit.

- Switch off and unplug the appliance; let it entirely cool.

- Complete all requirements of Chapter CLEANING AND CARE.

- Keep the appliance in a dry cool place.