JoyHaul - Scooter Hiboy - Free user manual and instructions

USER MANUAL JoyHaul Hiboy

JoyHa Electric Sco

USER MANUAL

The manufacturer reserves the right to make changes to the product and update this manual at any time.

Contents

1. Package Contents 01
2. Product Overview .... 02
3. Installation Instructions .... 04
4. Charging 05
5. Operation Instructions .... 06
6. Important Safety Instructions .... 10
7. Moving and Storage Instructions .... 12
8. Dangerous Actions (No Attempting!) .... 23
9. Safety Reminder 25
10. Daily Care and Maintenance.... 26
11. Specifications 29
12. Limited Warranty Statement.... 30
13. Questions & Answer...... 32
    14 Contact Us 34

Contenidos

Line drawing of a three-wheeled electric scooter with wheels and suspension (no text or symbols)

Carefully check the package contents. If anything is missing or damaged, please contact Hibcy customer service for support at [e-mail].

Charger Hexagon Wrench [amm, 5mm]

Handle Head light Stem tube Front fender Fork Front Solid Tire Frame Display panel Throttle Brake lever Seat Storage Bag Rear fender Rear Solid Tire Rear wheel motor Charging port Kickstand

Display Panel

Battery sensor Speed 1st gear speed indicator 2nd gear speed indicator 3 d gear speed indicator Light indicator Functional button Klampeter and inductor Oral ball icon Metal load indicator Instrument set

Power Button	Press 2.3s	Turn on/off
	One click	Switch speed
Function button	One click	LED lighting on/off
	Double click	Toggle metric/imperial

Power On/OFF: Press and hold the "①" button for 2 seconds to turn the device on or off.

-Lighting Control: Click the "■" button to toggle the lights and off.

When lights are on, the "icon" icon illuminates; lights default to off after power - on.

-Unit Switch (Kilometers/Miles): Double - click the "U" button to switch between distance units.

-Gear Shift: Click the "button to cycla through gears 1-3.

Available modes are:

ECO mode | energy-saving|: Limits speed to 4 mph

D mode [standard]: Limits speed to 6 mph

5 mode (sport): Limits speed to 9.2 mph

1. Installation Instructions
   

Take the stem out of the box and use the three screws provided to tighten and secure the stem to the body.

4. Charging 5. Operation Instructions

Changing Adapter

Your senator will be fully charged when the LED light on the charger changes from red learning to progress fully charged.

The charging, to \$201 (low) charge.

Even so, we think, do not recommend to share your socket for alone

- Even so, we and do it, because to bring your subscriber for doing me. - Do not grow with changes if the champion can is up. Come the champion out when

-Do not not use

-Leave it indoor when charging or not riding.

Charging at the carcopter shall only be performed with the manufacturer's

recommended changer.

Always wear a helmet and safety gear in seatl falling and injury during the driving learning, as shown in the figure.

Line drawing of a scooter with a water tank and a digital display showing 98% (no text or symbols on the main diagram)

1. Turn the power on, and check the power indicator.

2. Make sure your brakes are functioning properly before riding

3. Make sure the handlebar is not loose or wobbly before riding.

e. Please put the foot brace away before riding

7. Please ensure the tires are in good condition before use

4. Make sure the seat is not loose before riding. 5. Please use the original charger.

8. Step on the deck with one foot, and slowly kicks off thater on the ground

9. When the scooter starts to coast, put both feet on the deck and press the throttle will engage once the coasting speed exceeds 3.1 mph.

10. Release the throttle to reduce the speed slowly Squeezethe brake lever for a sudden brake.

11. Till your body to the steering direction as you turn, and turn the handlebar slowly.

1. Important Safety Instructions
   

Simple line drawing of a person standing in the rain with falling water (no text or symbols)

Do not ride in the rain.

Keep your speed between 3.1-6.2 mph when you ride through speedbumps, elevator door slits, bumpy roads or other uneven surfaces. Slightly band your knee to better adjust mentioned surfaces.

Simple line drawing of a person standing inside a door, viewed from the side (no text or symbols)

Look out for doors, elevators and other overhead obstacles.

Do not accelerate when you go downhill.

Do not press the throttle when you're walking alongside the scooter. Do not hang bags or other heavy stuff on the handle

Always stay clear of obstacles. Keep both feet on the deck all the time.

WARNING - When using this product, basic precautions should always be followed, including the following:

1. Read all the instructions before using the product.

2. To reduce the risk of injury, close supervision is necessary when the product is used near children.

3. Do not put fingers or hands into the product.

4. Do not use this product if the electrical cord or output cable is damaged, has broken insulation, or any other signs of

damage

1. This equipment is not intended to be used at ambient temperatures less than -10^ [14°F] or above ambient

2. This equipment is not intended to be used at ambient temperatures less than 10°C (114°F) or above ambient temperature of 50°C (106°F). The equipment's recommended storage temperature is between 10°C (59°F) and 40°C.

(4005)

1. The battery is inserted to be charged upon the ambient temperature, or between 100°C (50°F) and 400°C (10/16). Never

2. The battery is intended to be a surgical when the implant can be performed

change the battery when ambient temperatures are outside this range.

The battery is not intended to be used at ambient temperature less than -10°C [4°F] or above ambient temperature of 600 (30V). The battery recommended changes in temperature between them [annotated words www].

40°C [104°F]. The battery's recommended storage temperature is between 15°C [59°F and 25°C 77°F].

7. Moving and Storage Instructions

Moving warning:

When transporting the electric scooter, ensure that the device is in the off-position to avoid accidental activation by in-servent

switch contact

Advisc users to adopt the correct lifting posture by using the electric scooter vertically to prevent the device from tilting.

- Invaline assets a turn adopt the contract being passed, will be Wha headling, where hold's more.

orating.When na Storage warning.

Storage Warning:

- When the electric scooter is not in use, keep it indoors where it is dry and cool.

- Do not put it outdoors for a long time.

Excessive sunlight, overheating and overcooling accelerate tire aging and compromise the electric bike and the battery pack's

lifevroom

Electric Scooter Usage, Storage, and Safety Guide

The battery of the electric scooter is built-in and should be stored within the temperature and humidity range specified in the product specifications; otherwise, it may lead to performance degradation, leakage, or rust.

It is recommended to store the electric scooter at room temperature (below 20°C), in a dry environment with humidity below 60%, dust free and free from corrosive gases. The battery charge level should be maintained between 30%-50%. It storing for an extended period, check the battery every 6 months and recharge if the charge falls below 30%. High valtages storage accelerates battery performance degradation. The battery operates through chemical reactions, so even under standard storage and usage conditions, its performance will naturally degrade over time. Because the battery relies on chemical processes, its capacity will gradually decline even when not in use for long periods.

If battery operating conditions (such as charging/discharging, ambient temperature) are not kept within specified limits, its lifespan may be shortened, and equipment damage could occur due to electrical leakage.

If the battery fails to hold a charge even after proper charging, and since the battery is built-in, this may indicate that professional inspection or replacement is required.

Warnings and Notes

Warning

- The charger must have a full-charge detection function (via timer, current monitoring, or open-circuit voltage detection). Charging must stop once the battery is fully charged. Trickle charging is strictly prohibited.

- Never threw the battery into fire or heat it. Keep the battery away from high temperatures and fire sources, and avoid storing it in hot environments.

* Do not reverse the battery's positive and negative terminals. Since the battery is built-in, special care must be taken to prevent connection.

- Battery terminals (+ and -) must not come into contact with metal objects (e.g., necklaces, hair clips), to avoid short circuits.

- Do not pierce, hammer, tied on, or otherwise strike the battery with any object. - Disassembly, modification of the battery housing, or welding is strictly prohibited. As the battery is built-in, unauthorized disassembly may cause serious damage to the device.

- Direct soldering on battery terminals is not allowed. Nor should the battery be disassembled, deformed, or modified. - Do not immerse the battery in water or store it in a wet condition.

- Avoid placing the battery near fire sources or direct sunlight while charging

* Do not touch leaked battery contents directly.

* Since the battery is built-in, users must never attempt any battery-related operations without professional guidance. All battery-related tasks must be performed by qualified personnel

Note

- Use the correct charger and follow the charging and discharging instructions.

- Users must not play with the battery or any battery-related components.

- As the battery is built-in, there is no risk of mixing it with other brands, battery types [dry calls, NiMH, NiCo], or old/new lithium

batteries. However, always use original equipment and accessories.

* Do not charge continuously for more than 12 hours, nor leave the battery connected to the charger for more than 24 hours.

- If the battery emits an unusual odor, heats up, changes shape or color, or leaks electrolyte, stop using it immediately and contact a non-invasive. Do not allow to press the battery contents.

• When not in use for a long time, keep the battery at 31%

- If electrolyte gets into the eyes, do not rub them. Rinse thoroughly with water and seek medical attention immediately to avoid serious injury

Battery Maintenance

- This product uses a built-in original battery pack. Replacing it with a non-original brand or model may pose safety risks.

- Do not touch the electrodes, disassemble, or puncture the casing. Keep the terminals away from metal objects to prevent short circuits that may cause damage or injury.

- Always use the original power adapter to prevent equipment damage or fire hazards.

- Improper disposal of used batteries can harm the environment. As the battery is built-in, please dispose of it according to local

regulations and through authorized recycling centers.

• After each use, fully charge the battery to extend its lifespan.

Do not expose the battery to environmental temperatures above 40°C or below -10°C (-23°F). For example, avoid leaving the scooter in a

If the electric scooter will not be used for more than 30 days, fully charge the battery, store it in a cool and dry place, and recharge it every 60 days to maintain battery health.

It is recommended to charge the battery before it is completely drained to prolong its life. The battery performs best at normal room

Temperature. At temperatures below 0°C (32°F), performance drops significantly. For instance, at -20°F (-29°C), the range may be reduced by half. Damage caused by prolonged storage without charging is irreversible and not covered under warranty. Once damaged, the battery may no longer accept a chance and would require professional repair.

1. Dangerous Actions (No Attempting!)
   

Line drawing of a person riding a bicycle on a road with a car in the background (no text or symbols)

Do not ride in traffic lanes or residential areas where vehicles and pedestrians are both allowed.

Do not keep your feet on the rear/mouth guard.

Do not keep the hands far from the handlebar.

9. Safety Reminder

• This electric scooter is a leisure device. But once they're in a public area, they'll be seen as vehicles, subjecting to any risks faced by vehicles. For your safety, please follow instructions in the manual and traffic laws and regulations set forth by government and regulatory agencies.
• At the same time, you should understand that risks cannot be entirely avoided as others may violate traffic regulations and drive incautiously, and you're exposed to road accidents just as when you're walking or biking. The faster the scooter is, the longer it takes to stop. On a smooth surface, the scooter may slip, lose balance, and even result in a fall. Thus it is crucial that you use caution, keep proper speed and distance, especially so when you're unfamiliar with the place.
• Respect pedestrians' Right at Way. Try not to startle them while driving, especially children. When you ride from behind pedestrians, ring your belt to give them a heads-up and slow your scooter to pass from their left applicable to countries where vehicles drive on the right. When you ride across pedestrians, keep to the right at a low speed. When you drive across pedestrians, keep the lowest speed or getting off the vehicle.
• Closely follow the safety instructions in the manual especially in the countries that lack relevant laws and regulations regarding electric scooters. I libay shall not be liable for any financial losses, physical injuries, accidents, legal disputes and other interest conflicts resulted from actions that violate user instructions.
• Do not lend your scooter to whoever doesn't know the operations. And when you do lend it to your friends, please take the responsibility to ensure he/she knows the operation and wears the safety gear.
• Check the scooter before every use. When you note loosen parts, low battery alerts, excessive wear, strange sounds, malfunctions and other abnormal conditions, stop riding immediately and call for professional support.
• Devices are not intended for use at elevations greater than 2000 m above sea level. Prolonged Exposure to UV Rays, Rain and the Elements May Damage the Enclosure Materials, Store Indoors When Not In Use.

WARNING - Risk of Fire - No User Serviceable Parts.

10. Daily Care and Maintenance

Cleaning:

If you see stains on the scooter's body, wipe them off with a damp cloth. If the stains won't scrub off, put on some toothpaste, and scrub them with a brush. Do not use sandpaper or other abrasive materials to polish them.

Notes: Do not clean the scooter with a high-pressure water gun or other water jets to avoid direct damage. Do not clean the scooter when it is turned on, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in electric shock or other major problems.

WARNING!

Battery maintenance:

1. Use original battery parts and accessories.

2. Do not touch the contacts. Do not dismantle or puncture the casing of the battery to prevent short circuit which may result in battery damage or even injuries and deaths.

3. Use original power adapter to charge the battery.
4. Mishandling of used batteries may cause tremendous harm to the environment. To protect nature, please follow local regulations to properly dispose used batteries.
5. After every use, fully charge the battery to prolong its lifespan.

Do not place the battery in an environment where the ambient temperature is higher than 104°F or lower than 14°F (e.g. do not leave the scooter or the battery pack in a car under direct sunlight for an extended time.

Do not throw the battery pack into fire as it may load to battery failure, battery overheating, and even another fire. If the scooter is expected to be belt idle for more than 30 days, please fully charge the battery and place it in a dry and coal place. Keep in mind to recharge it every 60 days to protect the battery from potential damage which is beyond limited warranty. Always charge before exhausting the battery to prolong the battery's lifespan. The battery pack performs better at normal temperature, and poor when it is below 32°F. For instance, when it is below -4°F, the riding range is only half or less abnormal state. When the temperature rises, the riding range resolues. Damage caused by prolonged lack of charging is irreversible and is not covered by the limited warranty. Once the damage is done, the battery can not be recharged.

ISED Canada Statement:

- This device contains licence-exempt transmitter(s)/receiver(s) that comply with innovation, Science and Economic Development Canada's licence exempt RSS(s). Operation is subject to the following two conditions:

| 1 | this device may not cause interference, and

| 2 | this device must accept any interference, including interference that may cause undesired operation of the device.

- Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

- To maintain compliance with IC's RF Exposure guidelines, this equipment should be installed and operated with minimum distance of 5mm from the radiator to your body. This device and its antennas[5] must not be co-located or operated in conjunction with any other antenna or transmitter.

FCC Warning

- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

[1] This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

- NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

- NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

- The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

1. Specifications 12. Limited Warranty Statement

Joyfuli	Item	Specifications
Dimension	Size	34.65 x 1.20 - 32.60 in (85 x 10^4 - 83 cm)
	Vertical Height	5.17 inch [10 cm]
Weight	Maximum Load	110 m, 30 kg
	Net Weight	29.4 inch, 29.12 kg
Riding Requirements	Recommended Age	<10 Years, Old
	Required Height	31.5-59.1 in (60-150 cm)
	Maximum Speed	9.5 inch (1.5 cm/s)
	Maximum Damp	5 inches [8 km]
Machine	Operating Temperature (°C)	-30-42°C
	Storage Temperature (°C)	-30-42°C
Parameters	Climbing Degree	5%
	Waterproof Rating	10%
Motor	Motor Size	0.5 in motor
	Tire Size (Inner-Tire)	0.5 in
	Tire Slope (Border)	8.5 in
	Tire Type	5000 Tires
Battery Pack	Rated Voltage (V)	21.6
	Maximum Voltage (W)	22.2
	Rated Energy (Wh)	50.10W
	Maximum Charging Current (A)	1 A
Motor Parameters	Rated Power	100 W
Charger	Output Voltage (V)	23.2 V
	Output Power (W)	13.12 W
	Maximum Output Current	0.6 A
	Charging Time	45 min

[Item height: from 100 ground to the top of the scalar,
[2]May, and the maximum strucile weight shall be kept within. Till the drawer and sheets included in any race, Corourier an extraweight of the clothes or other exercise with us
during the trip and the gravity generator by speed, the seacoater will not support it. If this load limit is concealed.

The real helixy life varies with different barbers at the end, typically went speed and opening habits.

30 DAY SATISFACTION GUARANTEED RETURN POLICY

If you are unsatisfied with your purchase, Hilboy's return policy allows you to return your undamaged Hilboy product purchased on the Authorization channel within 30 days counting from the date of receipt of shipment, and request a refund from the Authorization channel for any reason. Note: The cost of return shipping will be borne by the customer if the product has no quality issue.

For the return request, Hlacy is not responsible for lost packages due to the carrier, or products received that cannot be verified. Received products that have damage determined to have been caused by the end-user may be subject to denial of the return request.

TO QUALIFY FOR A REFUND, ALL THE FOLLOWING CONDITIONS MUST BE MET:

1.A Return Merchandise Authorization (RMA) must be requested from Hiboy within 30 days from the date of receipt of shipment. To request an RMA, contact Hiboy Service Team at [e-mail].

1. The cost of return shipping will be borne by the customer.

2. For warranty service, please keep your receipt and/or invoice to validate proof of purchase

3. Returned product must be in good physical condition (not physically broken or damaged).

4. All accessories originally included with your purchase must be included with your return.

5. If you return a product to Hiboy, [a] without an RMA from Hiboy [b] without all parts included in the original package, Hiboy retains the right to refuse delivery of such return.

LIMITED PRODUCT WARRANTY

Hiboy product basically will be free from defects in materials and workmanship under normal use for a period aforementioned. Hiboy does not warrant the operation of the product will be uninterrupted or error-free.

Hiboy is not responsible for damage arising from failure to follow instructions relating to the product's usage.

REMEDIES

If a hardware defect is found and a valid claim is received by Hiboy within the Warranty Period, Hiboy will, at its option and to the extent permitted by law, either (1) repair the product at no charge, using now or refurbished replacement parts or, [2] replace the product with a new or refurbished product. In the event of a defect, to the extent permitted by law, these are your sole and exclusive remedies. Shipping and handling charges may apply except where prohibited by applicable law. This Limited Warranty is valid only in the jurisdictions where the products are sold by www.hibay.com, and is valid to the extent permitted by the applicable laws of such jurisdictions. Any replacement hardware product will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer, or for any additional period of time that may be applicable in your jurisdiction.

HOW TO OBTAIN WARRANTY SERVICE

A Warranty Service Order must be requested from Hibey within Warranty Period from the date of receipt of shipment. To request a Warranty Service Order, contact Hibey Service Team [e-mail]. To obtain warranty service, you must deliver the product, in either its original packaging or packaging providing an equal degree of protection, to the address specified by Hibey. In accordance with applicable law, Hibey may require the customer to furnish proof of purchase details and/or comply with registration requirements before receiving warranty service, period or thirty 130 days, whichever is longer, or for any additional period of time that may be applicable in your jurisdiction.

LIMITATION OF DAMAGES

Except to the extent prohibited by applicable law, Hiboy shall not be liable for any incidental, indirect, special, or consequential damages, including but not limited to loss of profits, revenue or data, resulting from any breach of express or invalid warranty or condition, or under any other legal theory, even when Hiboy has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of special, indirect, incidental or consequential damages, so the above limitation or exclusion may not apply to you.

13. Question & Answer

Q: Is there any necessary information that needs to be included before contacting the Hiboy Support Team?

A: Yes, if you need any support from Hiboy, please contact us at [e-mail], and please always include your order number correct model No., descriptions of the problem, pictures, and videos that can show details about the issue in the email, thanks.

Q: My scooter can't be turned on, what can I do?

At first, please make sure you are not trying to turn on the scooter while it is charging. For safety reasons, the scooter cannot be turned on during charging. Second please make sure the scooter has been charged for a while to have enough battery to support it can be turned an, otherwise please contact us at [e-mail] for further support.

0: I can't charge my scooter, what's the problem?

A: Please note if the scooter is charging, then the LED on the charger will show red color, if the scooter is fully charged, then the LED on the charger will show green color.

To check if the charger is defective, plug the charger into the socket without connecting it to the scooter. If the charger's LED is not on or is not green, the charger may be defective. If the charger is not defective, please contact us at [e-mail] for further support.

Q: What if the E-Scooter arrived missing accessory or broken part?

A: Please take a photo and send to Hiboy Support Team's email: [e-mail], Hiboy Support Team will reply you soon and send correct accessory or part replacement.

D: My scooter was stolen. Can you help me?

A: We are sorry, but we are unable to track the location or serial number of your scooter. Please contact your local police for assistance.

Q: I have written several emails to [e-mail], but no responses received, why?

A. Our Hiboy Support Team will reply to you within 1 working day, if you didn't receive any reply from us, please also kindly check your spam box, and add [e-mail] on your whitelist to make sure our reply is not blocked. In addition, you can also contact us on the platform where you purchased the scooter for example Amazon chat box, leave message on hiboy.com website, eBay chat box...etc.

D: Why the speed can't reach 7.3 mph?

A: Please make sure you have double clicked the power button to set the speed mode to Sport mode, because we have three speed modes, 100 mode (energy-saving), D mode (Standard), and S mode (Sports).

Q: Can I ride the scooter in the rainy days?

A: Kindly note the scooter waterproof level is IPX4, we don't suggest you to ride it in the rainy days.

Q. Is there any caution for storing the scooter if I need to go out for a long time vacation?

A: Please make sure the scooter is stored in a dry & cool place. Do not leave it outdoors for a long time, and if the scooter is expected to be left idle for more than 30 days, please fully charge the battery, keep in mind to recharge it every 60 days to protect the battery from potential damage which is beyond limited warranty.

14. Contact Us

Contact us if you have any questions, comments or need assistance.

E-mail Service [e-mail]

@Hiboy_Official

@Hiboy Official

@Hiboy

www.hiboy.com

Line drawing of a three-wheeled electric scooter with wheels and suspension (no text or symbols)

Cargador

Leave Hexagonal (4mm, 5mm)

Side profile illustration of a person's head and neck with a close-up view of the shoulder area (no text or symbols)

Line drawing of a scooter with wheels and a small inset showing a digital timer (no text or symbols on the scooter itself)

Simple line drawing of a person standing in the rain with water droplets (no text or symbols)

!

Simple line drawing of a person standing in front of a door, no text or symbols present

A

Simple line drawing of a person riding a scooter on a flat surface (no text or symbols)

!

Electric Scooter Usage, Storage, and Safety Guide

The battery of the electric scooter is built-in and should be stored within the temperature and humidity range specified in the product specifications; otherwise, it may lead to performance degradation, leakage, or rust.

It is recommended to store the electric scotler at room temperature (below 20°C), in a dry environment, with humidity below 60%, dust-free and free from corrosive gases. The battery charge level should be maintained between 30%–30%. If storing for an extended period, check the battery every 6 months and recharge if the charge falls below 30%. High-voltage storage accelerates battery performance degradation. The battery operates through chemical reactions, so even under standard storage and usage conditions. Its performance will naturally degrade over time. Because the battery relies on chemical processes, its capacity will gradually decline even when not in use for long periods.

If battery operating conditions (such as charging/discharging, ambient temperature) are not kept within specified limits, its lifespan may be shortened, and equipment damage could occur due to electrolyte leakage.

If the battery falls to hold a charge even after proper charging, and since the battery is built-in, this may indicate that professional inspection or replacement is required.

Warnings and Notes

Warning

- The charger must have a full-charge detection function (via timer, current monitoring, or open-circuit voltage detection). Charging must stop once the battery is fully charged. Trickle charging is strictly prohibited.

- Never throw the battery into fire or heat it. Keep the battery away from night temperatures and fire sources, and avoid storing it in hot environments.

- Do not reverse the battery's positive and negative terminals. Since the battery is built-in, special care must be taken to prevent connection errors.

* Battery terminals (+ and -) must not come into contact with metal objects (e.g., necklaces, hair clips), to avoid short circuits.

- Do not pierce, lantern, step on, or otherwise strike the battery with any object. - Disassembly, modification of the battery housing, or welding is strictly prohibited. As the battery is built-in, unauthorized disassembly may cause serious damage to the device.

- Direct soldering on battery terminals is not allowed. Nor should the battery be disassembled, deformed, or modified.

- Do not immarse the battery in water or store it in a wet condition.

- Avoid placing the battery near fire sources or direct sunlight while charging. - Do not touch locked battery contacts directly.

- De not touch leaked battery contents directly. - Since the battery is built-in, users must never attempt any battery-related operations without professional guidance. All battery-related tasks must be performed by qualified personnel.

Note

- Use the correct charger and follow the charging and discharging instructions.

- Users must not play with the battery or any battery-related components. - As the battery is built-in, there is no risk at mixing it with other brands, battery types [dry calls, NiMH, NiCo], or old/new lithium batteries. However, always use original equipment and accessories.

- Do not charge continuously for more than 12 hours, nor leave the battery connected to the charger far more than 24 hours. - If the battery emits an unusual odor, heats up, changes shape or color, or leaks electrolyte, stop using it immediately and contact a professional. Do not attempt to remove the battery yourself.

- When not in use for a long time, keep the battery at 30%–50% charge and store the scooter in a cool, dry place.

* I'll electrolyte gets into the eyes, do not rub them. Rinse thoroughly with water and seek medical attention immediately to avoid serious injury.

Battery Maintenance

- This product uses a built-in original battery pack. Replacing it with a non-original brand or model may pose safety risks.

- Do not touch the electrodes, disassemble, or puncture the casing. Keep the terminals away from metal objects to prevent short circuits that may cause damage or injury.

• Always use the original power adapter to prevent equipment damage or fire hazards.

- Improper disposal of used batteries can harm the environment. As the battery is built-in, please dispose of it according to local

regulations and through authorized recycling centers.

• After each use, fully charge the battery to extend its lifespan.

Do not expose the battery to environmental temperatures above 40°C or below -10°C (-23°F). For example, avoid leaving the scooter in a car exposed to direct sunlight for long periods.

Never threw the battery into fire, as this may cause malfunction, overheating, or even fire.

If the electric scooter will not be used for more than 30 days, fully charge the battery, store it in a coal and dry place, and recharge it every 60 days to maintain battery health.

It is recommended to charge the battery before it is completely drained to prolong its life. The battery performs best at normal room

temperature. At temperatures below 0°C (32°F), performance drops significantly. For instance, at -20°F (-20°C), the range may be reduced by halt. Damage caused by prolonged storage without charging is irreversible and not covered under warranty. Once damaged, the battery may no longer accept a charge and would require professional repair.

Line drawing of a person riding a bicycle on a road with a car in the background (no text or symbols)

ISED Canada Statement:

- This device contains licence-exempt transmitter[s]/receiver[s] that comply with Innovation, Science and Economic Development Canada's licence exempt RSS[s]. Operation is subject to the following two conditions:

| 1 | this device may not cause interference, and

| 2 | this device must accept any interference, including interference that may cause undesired operation of the device.

- Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

- To maintain compliance with IC's RF Exposure guidelines, this equipment should be installed and operated with minimum distance of 5mm from the radiator to your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

FCC Warning

- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

[1] This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

- NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

- NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

- The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.