DO7091P - Ironing board DOMO - Free user manual and instructions

USER MANUAL DO7091P DOMO

Modern folding table with metal legs and adjustable armrest (no text or symbols visible)

GARANTIEVOORWAARDEN

CONDITIONS DE GARANTIE

This appliance has a two year warranty period. During this period the manufacturer is responsible for any failures which are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party. The warranty will only be valid if the warranty application has been completed by the dealer at the time of purchase. All parts, such as brushes and batteries, which are subject to wear, are excluded from the warranty.

RECYCLAGE INFORMATIE

RECYCLING INFORMATIONEN

RECYCLING INFORMATION

The symbol 📄 on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be brought to the applicable collection point for recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service of the shop where you purchased the product.

Labeled diagram of a folding table with numbered parts for identification

GEBRUIK

Labeled diagram of a folding table with numbered parts for identification

VERWENDUNG

For safety purpose you should read these instructions carefully before using the appliance

The appliance is designed for domestic use and may only be operated in accordance with these instructions for use.

- Check the mains voltage stated on the rating plate corresponds to the local electricity supply

- Unwind and straighten the power cord before use

- Disconnect appliance from the mains supply. Before plug in or unplug any ironing machine to appliance. Before remove any part from the appliance or refi t any part to the appliance. Before cleaning and/or maintenance. If work improperly. After used

- Keep away the appliance from children

- Turn the power switch off before disconnect the appliance from mains supply

- The iron board shall only be used in conjunction with iron or iron with separate boiler

- The supply voltage of the iron or iron with separate boiler being connected shall correspond with the voltage marked for the socket.

- The max load of the socket is

2200 W (for AC220 V)

2300 W (for AC230 V)

2400W (for AC240V)

- If the power cord/any part of the appliance is damaged, the manufacturer or its service agent or similarly qualified person must replace it in order to avoid hazard

- Do not allow children touch the appliance or the power cord when operating

- Do not use an extension power cord set unless competent authority has approved it.

- Do not touch any hot part of appliance.

- Do not using a steam iron / generator when the ironing board is cold or unventilated as this might cause humidity to accumulate within the ironing board

- Do not contact with the metal parts of the device that are subject to heat.

- Do not leave the appliance unattended when it is connected to a mains supply outlet.

- Avoid that fi ngers becomes squeezed during closing the board

- Do not use the appliance when it is damaged or performs abnormally

GET TO KNOW YOUR IRONING BOARD

1. Ironing board
2. Feet
3. Air (intake/off/outward) switch
4. Power on/off switch
5. Power indicator
6. Rolling wheel
7. Non-skid rubber footings
8. Handle
9. Inro supprot
10. Iron support heat insulation
11. Height adjusting lever
12. Circulation fan
13. Power point base

ONING BOARD 1 2 3 4 5 6 7 8 9 10 11 12 13

HOW TO USE

How to Open

• Place the ironing board in a horizontal position (fi g. 1) and the iron support upwards drive the height adjusting lever and pull the feet outwards until the desired height is reached.
• It is also possible to change the height of the ironing board according to the different positions. All you need to do is pull the handle and adjust the ironing board to position.
• The ironing board must be firmly supported on the ground
• Place the iron on the iron support and plug the iron's feed cable in to power point b base.
• Connect the plug of the iron into the mains. Make sure that the tension of the mains is the same as that indicated on the feature plate on the device.
• Start the device by pressing on the power switch.
• Ironing Board gradually heat up (LED Power indicator will light up always)
• Simply by select air (intake/off/outfl ow) switch for airfl ow upward, airfl ow off airfl ow downward respectively

NOTE: After you have fi nished ironing, leave the ironing board plugged in for 3 or 4 Minutes, so as to ensure that there is no humidity trapped inside the board. This will contribute to extend the board's life span.

HOW TO CLOSE

• Turn off the ironing board by pressing on the switch; Disconnect the iron from the power point basis, disconnect the ironing board.
• Pull the handle to release the feet
• As soon as the ironing board is cold, place in vertical position with the iron support

upward (fi g. 2), drive the height adjusting lever and pull the feet outwards unit the board is completely folded.

CLEANING

Disconnect the appliance before cleaning it. Gently remove the ironing board cloth from the appliance.

IMPORTANT : never remove the ironing board cloth with zipper, it may damage your ironing board. Never submerge the appliance in water nor any other liquid, and do not let it stand under a running tap. Do not use solvents nor abrasive products to clean it.

STORAGE

The appliance equipped with Easy rolling wheel, for easy storage/relocate