MDT24P6CST - Dishwasher MIDEA - Free user manual and instructions
Find the device manual for free MDT24P6CST MIDEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in dishwasher |
| Brand | Midea |
| Model | MDT24P6CST |
| Color | Stainless steel |
| Width | 60 cm |
| Depth | 55 cm |
| Height | 85 cm |
| Net weight | 40 kg |
| Capacity | 14 place settings |
| Energy class | E (former A+) |
| Water consumption per cycle | 9.5 L |
| Noise level | 44 dB(A) |
| Wash programs | 6 programs including Eco, Intensive, Quick, Glass |
| Options | Delayed start, Half load, Extra drying |
| Drying type | Condensation with heat exchanger |
| Drying class | A |
| Power supply | 230 V / 50 Hz / 10 A |
| Repairability index | 8.2/10 (estimated) |
| Spare parts availability | 7 years after end of commercialization |
| Filter cleaning | Every month |
| Child safety | Yes, key lock |
Frequently Asked Questions - MDT24P6CST MIDEA
How to install the Midea MDT24P6CST dishwasher?
Install requires connecting the appliance to a grounded 230 V socket, connecting cold water supply (3/4 inch) and drainage (minimum diameter 32 mm). Ensure the appliance is level. Refer to the built-in diagram in the manual.
What to do if the dishwasher does not start?
Check that the door is properly closed, that the power supply is present (cable plugged in, circuit breaker not tripped) and that the program is selected. If the problem persists, clean the filter and check the water supply.
How to clean the dishwasher filter?
Turn the filter counterclockwise to unlock it, remove it and rinse under running water. Use a soft brush if necessary. Replace by turning clockwise until it clicks. Clean it monthly to avoid bad odors.
What type of regeneration salt to use?
Use specific regeneration salt for water softener. Fill the reservoir (located at the bottom of the dishwasher) to the brim before first wash, then regenerate according to water hardness level.
How to resolve error code E1 on the Midea MDT24P6CST?
Error code E1 indicates a filling problem. Check that the water supply tap is open, the hose is not kinked and the water inlet filter is not clogged. If the problem persists, contact after-sales service.
Can you open the dishwasher during a cycle?
Yes, you can open the door carefully. A safety mechanism stops the cycle. Close the door and the cycle will resume automatically. Beware of hot steam.
What is the water and energy consumption of the Eco program?
The Eco program consumes approximately 9.5 L of water and 0.83 kWh of electricity for a capacity of 14 place settings. It is the most economical program for normally soiled dishes.
How to use the delayed start?
Select the desired program, then press the Delayed start button to choose the number of hours delay (1 to 24 h). Press Start to confirm. The cycle will start automatically after the delay.
What to do if the dishes remain humid after drying?
Make sure you have selected an additional drying option if available. Check that the rinse aid is sufficient and the compartment is filled. Clean the spray arms and the filter.
How to activate child lock?
Hold down the lock button (often a padlock) for 3 seconds until a padlock symbol appears. To deactivate, repeat the operation.
User questions about MDT24P6CST MIDEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual MDT24P6CST - MIDEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MDT24P6CST by MIDEA.