PBR 36 A1 - Radio PARKSIDE - Free user manual and instructions

Product Type	Portable DAB+ radio with Bluetooth and AUX
Brand	Parkside
Model	PBR 36 A1
Power Supply	18 V DC mains adapter (supplied) or 12 V/20 V battery (not supplied)
Reception Modes	DAB+, FM
Bluetooth	Yes, wireless connection for audio streaming
AUX Input	3.5 mm jack on the front
Control Buttons	On/Off, Volume dial, Band, Pause/Play, Presets 1-4
Display	Digital screen for DAB+ interface
Auto Scan	Yes, in DAB+ mode after power on
Standby Function	Yes, press the On/Off button
Battery Compatibility	12 V or 20 V batteries from the Parkside range
Accessories Included	Mains adapter, quick start guide
Maintenance	Clean with a dry cloth; avoid moisture
Safety Instructions	Read the manual before use; do not expose to liquids; use the correct adapter
Spare Parts	Mains adapter available as a spare part
Repairability	Professional repair recommended; no user-serviceable parts

Frequently Asked Questions - PBR 36 A1 PARKSIDE

How to connect my phone via Bluetooth?

Press the BAND button to switch to Bluetooth mode. Enable Bluetooth on your phone and select "PBR 36 A1" from the device list. The connection is established automatically.

How to search for DAB+ stations?

Turn on the radio by pressing ON/OFF. The automatic DAB+ station search starts immediately. You can also press BAND to switch between modes.

Can I use the radio without a battery?

Yes, plug the supplied 18 V mains adapter into the DC socket on the back and into a wall outlet. The radio works without a battery.

How to use the AUX input?

Press BAND until you reach AUX IN mode. Connect your audio device (MP3 player, etc.) via an AUX cable to the front jack. The sound plays automatically.

How to adjust the volume?

Turn the volume dial clockwise to increase, counterclockwise to decrease. The level is shown on the display.

How to turn the radio on and off?

Press the ON/OFF button to turn on the radio and switch to DAB mode. Press again to put it in standby. Hold down to turn off completely (if applicable).

What types of batteries are compatible?

Use Parkside 12 V or 20 V batteries (e.g., PX series). Insert the battery into the compartment on the back.

How to use presets?

In DAB or FM mode, tune to a station. Press and hold one of the 1-4 buttons to save the station. Recall it by briefly pressing the corresponding button.

What to do if the radio does not turn on?

Check that the mains adapter is properly connected or that the battery is charged and correctly inserted. Try a different wall outlet. If the problem persists, consult a professional.

How to clean the radio?

Use a soft, dry cloth. Do not use chemical or abrasive cleaners. Avoid letting water enter the interior.

USER MANUAL PBR 36 A1 PARKSIDE

Black Parkside portable electronic device with control panel and display screen (no readable text or symbols)

AKKU-BAUSTELLENRADIO / RUGGED RADIO / RADIO DE CHANTIER SANS FIL PBR 36 A1

DE AT CH

D2

Technical line drawing of a device casing with control panel and buttons (no text or symbols)

● Quick Start Guide

This information sheet is an integral part of the operating instructions. Keep it in a safe place together with the instruction manual. If you give the product to third parties, all documentation should be passed on to them as well. Before using the product, read the instruction manual and pay particular attention to the safety notes it contains.

Initial setup

1) Insert the 18V DC plug of the power adapter into the DC socket of speaker charging port. And then plug the AC power adapter into mains outlet.

2) Alternatively, you can insert 12V/ 20V battery into battery socket of speaker to power up this speaker.

Turning on the product

Press the ON/OFF button to enter display interface, and enter into DAB mode to auto start searching broadcast DAB+ station. Press ON/OFF button again to turn into standby mode and display will turn OFF.

C

Volume adjustment

You can also turn volume up/down via this rotator knob button. Turn clockwise to increase volume, and anti-clockwise to reduce volume.

D1

Connecting to playback device via Bluetooth

Press the BAND button to switch into Bluetooth mode and enable a Bluetooth connection. ACCEPT the product identification "PBR 36 A1" on the playback device. Then you can start to stream your music to this speaker via Bluetooth once connection ready.

D2

You can also use the Bluetooth control button "1" to "4" on speaker to playback music. Press briefly the Pause/Playback button to start play back. Press again briefly during playback to pause or continue playing.

E

AUX IN

Press the BAND button to switch into AUX IN mode, and then plug in the AUX cable at the front AUX IN socket to start use this function.

Line drawing of a device with control panel and cable (no text or symbols)

D2

Technical line drawing of a device with control panel and wiring (no text or symbols)

● Quick-Start-Guide

D2

Technical line drawing of a device with labeled ports and wiring (no text or symbols)

D2

Line drawing of a device with a digital display and cable (no text or symbols)

D2

Technical line drawing of a device with digital display and cable (no text or symbols)

1) Zasuňte 18 V DC zástrčku napájacieho adaptéra do sieťovej zásuvky na nabíjacom porte reproduktora. A potom zapojte sieťový adaptér do elektrickej zásuvky.

D2

Technical line drawing of a portable electronic device with control panel and power cord (no text or symbols)

D2

Technical line drawing of a device with labeled ports and cables (no readable text or symbols)

Quick-start-guide

D2

Technical line drawing of a device with labeled ports and wiring (no text or symbols)

● Guida rapida

D2

Technical line drawing of a device with labeled ports and wiring (no readable text or symbols)

D2

Technical line drawing of a device with control panel and cable (no text or symbols)