SCSKD01-30 - Barbecue accessory Vevor - Free user manual and instructions

Find the device manual for free SCSKD01-30 Vevor in PDF.

Vevor SCSKD01-30 - Barbecue accessory
📄 64 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Vevor SCSKD01-30 - page 1
1 / 64
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Barbecue Fire Ring Cover
Brand Vevor
Model SCSKD01-30
Category Barbecue Accessory
Compatible Dimensions Fire ring diameter: 30 inches (76 cm)
Color Black (typical)
Material Heat-resistant coated steel
Number of panels 4 panels (A, B, C, D) + handle (E)
Package contents Panels, handle, 12 bolts, 12 washers, 12 nuts, hex key, wrench, poker
Main functions Protect the barbecue fire ring, prevent ember projections
Care and cleaning Clean with a damp cloth after complete cooling. Do not use abrasive products.
Safety Do not place the cover on a hot fire pit. Keep out of reach of children. Avoid sharp objects.
Assembly Requires assembly by 2 people. Tighten the bolts after adjusting the panel positions.
Warranty Electronic warranty via www.vevor.com/support
Repairability Spare parts available upon request from the manufacturer
Markings VEVOR logo, inscription "TOUGH TOOLS, HALF PRICE"
Country of origin China (Shanghai)

Frequently Asked Questions - SCSKD01-30 Vevor

What is the diameter of model SCSKD01-30?
The SCSKD01-30 model is designed for a 30-inch (approximately 76 cm) diameter fire ring.
How to install the fire ring cover?
Assemble panels A, B, C, D by bolting them together, then attach the handle. It is recommended to have two people and not to fully tighten the bolts before everything is aligned.
Is this cover compatible with all barbecues?
It is designed for 30-inch diameter fire rings. Check the dimensions of your fire pit before purchase.
What material is used?
The cover is made of robust steel with a heat-resistant coating.
Can I use the cover when the barbecue is hot?
No, wait until the barbecue has completely cooled to avoid damaging the cover or burning yourself.
How to clean the cover?
Clean it with a damp cloth after cooling. Avoid abrasive cleaners that could scratch the surface.
Is the cover delivered with tools?
Yes, the package includes a hex key and a wrench for assembly, as well as a poker.
What to do if parts are missing?
Contact VEVOR customer service at www.vevor.com/support to get replacement parts.
Can I paint the cover?
It is not recommended to paint the cover as the paint may not withstand heat and may alter the coating properties.
Where can I find the complete manual?
The complete manual is available for free download at notice-facile.com for the Vevor model SCSKD01-30.

User questions about SCSKD01-30 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Barbecue accessory in PDF format for free! Find your manual SCSKD01-30 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SCSKD01-30 by Vevor.

USER MANUAL SCSKD01-30 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

FIRE RING COVER

MODEL: SCSKD01-20" / SCSKD01-27" /

SCSKD01-30" / SCSKD01-36" / SCSKD01-40"

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands, and do not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

MODEL: SCSKD01-20" / SCSKD01-27" / SCSKD01-30" / SCSKD01-36" / SCSKD01-40"

Diagram of a circular fan or solar panel with radial blades and a central hub, no text or symbols present.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

IMPORTANT SAFEGUARDS

Vevor SCSKD01-30 - IMPORTANT SAFEGUARDS - 1

WARNING: Read and understand this entire manual before operating or servicing this product. Failure to follow these warnings and instructions can cause personal injury or damage to valuable property.

  • Before placing the lid on the brazier, please make sure that the brazier is cool to avoid burning the lid.
  • Avoid children using the device. This product is not a toy. Do not allow children to play with it.
  • Keep away from sharp points, blades and other items, so as not to scratch the product.

SAVE THESE INSTRUCTIONS

PRODUCT SPECIFICATIONS:

Diagram of a circular fan or solar panel with radial blades and grid pattern, no text or symbols present.

Model#Product Size (mm)Internal Size (mm)Weight (kg)
SCSKD01-20" φ 485*170 φ 478*160 2.25
SCSKD01-27" φ 670*185 φ 663*170 3.05
SCSKD01-30" φ 760*215 φ 755*200 3.55
SCSKD01-36" φ 910*245 φ 895*215 4.45
SCSKD01-40" φ 1025*255 φ 1020*225 5.15

SIMPLE INSTRUCTIONS

A B C D

Step 1: Use 2 Bolts (T), 2 Washers (U), and 2 Nuts (V) to connect screen A with B.

A B C D

Step 2: Using the same method, connect panel C to B, and panel D to C in turns.

Diagram of a solar panel structure with a labeled component E, showing internal components and a magnified inset (no text or symbols)

E

Step 3: After all panels are assembled, using the same method, connect the handle (E) to panels A and B using 1 bolt (T), 1 washer (U), and 1 nut (V).

Step 4: Using the same method, connect the handle (E) to panels C and A in turns.

ATTENTION:

  • It is recommended to find someone to assist with the installation.
  • Do not tighten the bolts until you have finished all the installation.
  • If there is an improper gap during the installation, adjust the gap manually before fixing the screws. Make sure that the fire ring cover panels are installed in the proper position, and then finally tighten the screws with the plate handle.

PACKAGE INCLUDES

NOCOMPONENTSPICTURESYMBOLQ'TY
FITS MODEL #
SCSKD01-20"/SCSKD01-27" SCSKD01-30"/SCSKD01-36" SCSKD01-40"
1boltVevor SCSKD01-30 - ATTENTION: - 1T12pcs
2washerVevor SCSKD01-30 - ATTENTION: - 2U12pcs
3nutVevor SCSKD01-30 - ATTENTION: - 3V12pcs
4Hexagonal wrenchVevor SCSKD01-30 - ATTENTION: - 4/1pcs
5wrenchVevor SCSKD01-30 - ATTENTION: - 5/1pcs
6pokerVevor SCSKD01-30 - ATTENTION: - 6/1pcs

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangcheng Road 803, Nong 11, Hao 1602A-1609 Shi, Baoshan District, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Modèle#Taille du produit (mm)Taille interne (mm)Poids (kg)
SCSKD01-20"485*170φ478*1602.25
SCSKD01-27"φ670*185φ663*1703.05
SCSKD01-30"φ760*215φ755*2003,55
SCSKD01-36"φ910*245 φ895*2154.45
SCSKD01-40"φ1025*255φ1020*2255.15

SIMPLE INSTRUCTION

A B C D

YH CONSULTING LIMITED. C/O YH Consulting

Limited Bureau 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

FIRE RING COVER

MODEL: SCSKD01-20" / SCSKD01-27" /

SCSKD01-30" / SCSKD01-36" / SCSKD01-40"

Modell#Produktgröße (mm)Interne Größe (mm)Gewicht (kg)
SCSKD01-20"ÿ485*170ÿ478*1602,25
SCSKD01-27"ÿ670*185ÿ663*1703.05
SCSKD01-30"ÿ760*215ÿ755*2003,55
SCSKD01-36"ÿ910*245ÿ895*2154,45
SCSKD01-40"ÿ1025*255ÿ1020*2255.15

SIMPLE INSTRUCTIONS

A B C D

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

Vevor SCSKD01-30 - SIMPLE INSTRUCTIONS - 2

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

electronics www.vevor.com/support

FIRE RING COVER

MODEL: SCSKD01-20" / SCSKD01-27" /

SCSKD01-30" / SCSKD01-36" / SCSKD01-40"

Modello#Dimensioni del prodotto (mm)Dimensioni interne (mm)Peso (kg)
SCSKD01-20"ÿ485*170ÿ478*1602.25
SCSKD01-27"ÿ670*185ÿ663*1703.05
SCSKD01-30"ÿ760*215ÿ755*2003.55
SCSKD01-36"ÿ910*245ÿ895*2154.45
SCSKD01-40"ÿ1025*255ÿ1020*2255.15

SIMPLE INSTRUCTIONS

A B C D

A B C D

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

RAPPRESENTANZA DEL REGNO UNITO

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Modelo#Tamaño del producto (mm)Tamaño interno (mm)Peso(kilogramo)
SCSKD01-20"485*170 φ 478*160 2.25
SCSKD01-27" φ 670*185 φ 663*170 3.05
SCSKD01-30" φ 760*215 φ 755*200 3,55
SCSKD01-36" φ 910*245 φ 895*215 4.45
SCSKD01-40" φ 1025*255 φ 1020*225 5.15

SIMPLE INSTRUCTION

A B C D

Step 1: Use 2 bolts (T), 2 washers (U),

A B C D

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRESENTANTE CE

E-CrossStu GmbH

NEED HELP? CONTACT US!

Model#Rozmiar produktu (mm)Rozmiar wewnętrzny (mm)Waga (kg)
SCSKD01-20" φ 485*170 478*160 2,25
SCSKD01-27" 670*185 663*170 3.05
SCSKD01-30" 760*215 755*200 3,55
SCSKD01-36" 910*245 895*215 4,45
SCSKD01-40" 1025*255 1020*225 5.15

SIMPLE INSTRUCTION

A B C D

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

Przedstaw ciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

PRODUCT SPECIFICATIONS:Diagram of a circular fan or solar panel with radial blades and a central hub, no text or symbols present.

Model#Productgrootte (mm)Interne grootte (mm)Gewicht (kg)
SCSKD01-20"ÿ485*170ÿ478*1602.25
SCSKD01-27"ÿ670*185ÿ663*1703.05
SCSKD01-30"ÿ760*215ÿ755*2003.55
SCSKD01-36"ÿ910*245ÿ895*2154.45
SCSKD01-40"ÿ1025*255ÿ1020*2255.15

SIMPLE INSTRUCTION

A B C D

YH CONSULTING LIMITED. C/O YH Consulting

Limited Kantoor 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC-REP

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

BRANDRINGSKÄLL

MODEL: SCSKD01-20" / SCSKD01-27" /

SCSKD01-30" / SCSKD01-36" / SCSKD01-40"

NEED HELP? CONTACT US!

Modell#Produktstorlek (mm)Inre storlek (mm)Vikt (kg)
SCSKD01-20"ÿ485*170ÿ478*1602,25
SCSKD01-27"ÿ670*185ÿ663*1703.05
SCSKD01-30"ÿ760*215ÿ755*2003,55
SCSKD01-36"ÿ910*245ÿ895*2154,45
SCSKD01-40"ÿ1025*255ÿ1020*2255.15

SIMPLE INSTRUCTION

A B C D

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : SCSKD01-30

Category : Barbecue accessory