J10-406-50-70 - Construction tool Vevor - Free user manual and instructions

Find the device manual for free J10-406-50-70 Vevor in PDF.

Vevor J10-406-50-70 - Construction tool
📄 45 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vevor J10-406-50-70 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeJ-shaped rebar stakes
ModelJ10-406-50-70
Stake Length16 inches (406 mm)
Diameter10 mm
ShapeJ (J-hook)
MaterialHRB400E Steel
Number of Pieces24 pieces (standard) / 16 pieces (depending on version)
Net Weight7.15 kg
Product Dimensions406 × 70 × 10 mm
Main ApplicationsSecuring fences, tarps, tents, garden nets, plants
InstallationDrive with a hammer or rubber mallet; pre-drill if soil is hard
StorageCool, dry place
CleaningRinse with water to remove dirt and debris
SafetyWear gloves to avoid sharp edges; do not hammer too hard
RepairabilityParts not repairable; replace if damaged
WarrantyElectronic warranty certificate available at www.vevor.com/support
ComplianceEuropean Directive 2012/19/EU (WEEE)

Frequently Asked Questions - J10-406-50-70 Vevor

What are the available models of Vevor rebar stakes?
The listed models are J-10-304-40-80 (12 inches, 16 pieces), J10-406-50-70 (16 inches, 24 pieces), and J10-406-50-70 (16 inches, 16 pieces).
What material is used for these stakes?
The stakes are made of HRB400E steel, offering superior strength and durability.
How to install the rebar stakes?
Use a hammer or rubber mallet to drive them into the ground. If the soil is very hard, pre-drill a small hole beforehand.
What safety precautions should be taken?
Wear gloves to avoid sharp edges and do not hammer too hard to avoid bending the bar. Avoid leaving the J-hook exposed in walkway areas.
How to maintain the stakes?
Store them in a cool, dry place. Clean them occasionally with clear water to remove dirt, especially after use in humid environments.
Can these stakes be used to secure a tent?
Yes, you can attach a rope or other device around the J-hook to anchor a tent, garden nets, or tarps.
What is the length and diameter of the J10-406-50-70 model?
The length is 16 inches (406 mm) and the diameter is 10 mm.
How much does a pack of 24 stakes of model J10-406-50-70 weigh?
The net weight is approximately 7.15 kg for the pack of 24 pieces.
Where to find technical support and warranty?
Technical support and the electronic warranty certificate are available at www.vevor.com/support.
What to do if a stake is damaged?
The stakes are not repairable. If damaged, it is recommended to replace them to ensure safety and effectiveness.

User questions about J10-406-50-70 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Construction tool in PDF format for free! Find your manual J10-406-50-70 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. J10-406-50-70 by Vevor.

USER MANUAL J10-406-50-70 Vevor

REBAR STAKE USER MANUAL

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

Three identical black metal rods with pointed tips, arranged vertically (no text or symbols)

Vevor J10-406-50-70 - REBAR STAKE USER MANUAL - 2Warning-To reduce the risk of injury, user must read instructi manual carefully.
Vevor J10-406-50-70 - REBAR STAKE USER MANUAL - 3Vevor J10-406-50-70 - REBAR STAKE USER MANUAL - 4This device complies with Part 15 of the FCC Rules. Operat subject to the following two conditions:(1)This device may not harmful interference, and (2)this device must accept any inter received, including interference that may cause undesired operThis product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in European Union. This applies to the product and all accesso marked with this symbol. Products marked as such may not discarded with normal domestic waste, but must be taken to collection point for recycling electrical and electronic devices

INSTRUCTIONS

Thank you very much for choosing this rebar stake. Please read all instructions before using it. The information will help you achieve the best possible results.

Product ModelJ-10-304-40-80J10-406-50-70J10-406-50-70
Product Length(inch)121616
Product Diameter(mm)101010
Product ShapeJJJ
Number of Products16pcs24pcs16pcs
Product MaterialHRB400EHRB400EHRB400E
Net Weight of the Product3.8kg7.15kg4.8kg
Product Dimensions300*60*10mm406*70*10mm406*70*10mm

Multiple Application:

These stakes are ideal for securing fences, tarps, tents, plants, and garden or construction needs. The rebar material provides superior strength and longevity.

Easy installation: These stakes are easy to install. Use a hammer or rubber mallet to drive them into the ground.

Tips:

  1. Wear gloves when handling the rebar to avoid sharp edges.
  2. Do not hammer too forcefully, as this could bend the rebar.
  3. If the soil is very hard or rocky, consider pre-drilling a small hole to make driving the stake easier.
  4. Once the stake is in place, you can loop a rope, wire, or other material around the J Hook to fasten the item you want to anchor (tent ropes, garden netting).
  5. If you are anchoring something in an area with heavy foot traffic, be cautious not to leave the J Hook exposed in a way that could trip people.

Storage & Maintenance:

Storage: Store rebar stakes in a cool, dry place when not in use. Occasionally clean the stakes to remove dirt or debris, especially if used in wet or muddy conditions. A simple rinse with water should be sufficient.

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

Three identical black metal rods with pointed tips, arranged vertically (no text or symbols)

Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

REINFORCEMENT BAR BENDER

USER MANUAL

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

Three identical black metal rods with pointed tips, arranged vertically (no text or symbols)

Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

REBAR BENDER USER MANUAL

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

Three identical black metal rods with pointed tips, arranged vertically (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

REBAR TIE WIRE MANUAL USER

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

Three identical black metal rods with pointed tips, arranged vertically (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

OPERATING INSTRUCTIONS FOR REBAR TIE WIRE

MODELS: J-10-304-40-80/J10-406-50-70/J10-406-50-70

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODELS: J-10-304-40-80/J10-406-50-70/J10-406-50-70

Three identical black metal rods with pointed tips, arranged vertically (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

REBAR TIE WIRE

USER MANUAL

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

Three identical black metal rods with pointed tips, arranged vertically (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Affordable. Reliable. Home Improvement.

REBAR STAKE USER MANUAL

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

Three identical black metal rods with pointed tips, arranged vertically (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : J10-406-50-70

Category : Construction tool