J-10-304-40-80 - Construction tool Vevor - Free user manual and instructions

Product Type	Steel Rebar Stakes
Model	J-10-304-40-80
Dimensions	300 x 60 x 10 mm
Length	12 inches (approximately 30 cm)
Diameter	10 mm
Shape	J Hook
Material	HRB400E (high-strength steel)
Net Weight	3.8 kg
Number of Pieces	16
Applications	Securing fences, tarps, plants, etc.
Installation	Drive with a hammer or rubber mallet
Installation Tips	Wear gloves, do not hammer too hard, pre-drill in hard soil
Storage	Cool and dry place
Cleaning	Rinse with water
Safety	Beware of sharp edges, avoid tripping over the hook
Compliance	European Directive 2012/19/EC (WEEE)
Manufacturer	Shanghaimuxinmuyeyouxiangongsi
Importer (Australia)	SIHAO PTY LTD
Importer (United States)	Sanven Technology Ltd.

Frequently Asked Questions - J-10-304-40-80 Vevor

How to install the rebar stakes?

Use a hammer or a rubber mallet to drive the stakes into the ground. Wear gloves to avoid cuts.

What is the material of the stakes?

They are made of HRB400E steel, a high-strength steel used in construction.

How to maintain the stakes?

Clean them regularly with a water rinse to remove dirt and debris. Store them in a cool, dry place.

What are the dimensions of the J-10-304-40-80 model?

The dimensions are 300 x 60 x 10 mm, with a length of 12 inches (approximately 30 cm) and a diameter of 10 mm.

How many pieces are in the lot?

The lot contains 16 pieces for this model.

Can these stakes be used in hard or rocky soil?

Yes, but it is recommended to pre-drill a small hole to facilitate driving and avoid bending the stake.

Are the stakes rust-resistant?

The HRB400E material offers good resistance, but it is recommended to clean and dry them after use in wet conditions to prolong their lifespan.

Can these stakes be used for a tent?

Yes, they are ideal for anchoring tents, tarps, nets and other light structures. Pass a rope around the J hook.

What tools are needed for installation?

You will need a hammer or a rubber mallet, and possibly a drill for pre-drilling in hard soil.

What safety precautions should be taken?

Wear gloves to avoid sharp edges, do not hammer too hard, and ensure that the J hook is not left exposed in pedestrian areas to prevent tripping.

USER MANUAL J-10-304-40-80 Vevor

REBAR STAKE USER MANUAL

MODEL: J-10-304-40-80 / J10-406-50-70 / J10-406-50-70

Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80 / J10-406-50-70 / J10-406-50-70

Warning-To reduce the risk of injury, user must read instructi manual carefully.

This device complies with Part 15 of the FCC Rules. Operat subject to the following two conditions:(1)This device may not harmful interference, and (2)this device must accept any inter received, including interference that may cause undesired operThis product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in European Union. This applies to the product and all accesso marked with this symbol. Products marked as such may not discarded with normal domestic waste, but must be taken to collection point for recycling electrical and electronic devices

INSTRUCTIONS

Thank you very much for choosing this rebar stake. Please read all instructions before using it. The information will help you achieve the best possible results.

Product Model	J-10-304-40-80	J10-406-50-70	J10-406-50-70
Product Length(inch)	12	16	16
Product Diameter(mm)	10	10	10
Product Shape	J	J	J
Number of Products	16pcs	24pcs	16pcs
Product Material	HRB400E	HRB400E	HRB400E
Net Weight of the Product	3.8kg	7.15kg	4.8kg
Product Dimensions	300*60*10mm	406*70*10mm	406*70*10mm

Multiple Application:

These stakes are ideal for securing fences, tarps, tents, plants, and garden or construction needs. The rebar material provides superior strength and longevity.

Easy installation: These stakes are easy to install. Use a hammer or rubber mallet to drive them into the ground.

Tips:

1. Wear gloves when handling the rebar to avoid sharp edges.
2. Do not hammer too forcefully, as this could bend the rebar.
3. If the soil is very hard or rocky, consider pre-drilling a small hole to make driving the stake easier.
4. Once the stake is in place, you can loop a rope, wire, or other material around the J Hook to fasten the item you want to anchor (tent ropes, garden netting).
5. If you are anchoring something in an area with heavy foot traffic, be cautious not to leave the J Hook exposed in a way that could trip someone.

Storage & Maintenance:

Storage: Store rebar stakes in a cool, dry place when not in use. Occasionally clean the stakes to remove dirt or debris, especially if used in wet or muddy conditions. A simple rinse with water should be sufficient.

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

REINFORCEMENT PILE

USER MANUAL

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

REBAR BENDING TOOL USER MANUAL

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

REBAR TYING TOOL USER MANUAL

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

REBAR TYING TOOL USER MANUAL

MODELS: J-10-304-40-80/J10-406-50-70/J10-406-50-70

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODELS: J-10-304-40-80/J10-406-50-70/J10-406-50-70

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

REBAR TYING TOOL

USER MANUAL

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

REBAR STAKE USER MANUAL

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

MODEL: J-10-304-40-80/J10-406-50-70/J10-406-50-70

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP