FS10281-CP-G - Shower head Vevor - Free user manual and instructions

Find the device manual for free FS10281-CP-G Vevor in PDF.

Vevor FS10281-CP-G - Shower head
📄 122 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vevor FS10281-CP-G - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Shower wand (square shower head)
Brand Vevor
Model FS10281-CP-G
Head Dimensions 30.48 cm x 30.48 cm (12 inches x 12 inches)
Flow Rate 2.2 GPM (8.3 L/min)
Connection G1/2" (male thread)
Color Chrome (CP)
Material Chrome-plated plastic (ABS) or chrome-plated brass
Features Fixed shower head, adjustable spray (not specified), rubber nozzles for descaling
Maintenance and Cleaning Clean with a soft cloth and water; descale with white vinegar (soak 30 min); do not use abrasive products
Installation Wall mounting with included bracket; Teflon tape recommended; requires a hole 17.8 cm x 14 cm x 7-8 cm
Safety Wear gloves during installation; check seal tightness; close the switching valve when not in use
Included Parts Control valve (common), shower hose, cover plate, screws, bolts, washers, hex key, Teflon tape
Repairability Spare parts available: seals, nozzle, plate. Disassembly possible with basic tools
Warranty Not specified, but recommended proper use

Frequently Asked Questions - FS10281-CP-G Vevor

How to install the Vevor FS10281-CP-G shower wand?
Make sure the wall connection is G1/2. Wrap Teflon tape around the thread to prevent leaks. Attach the wall plate with the provided screws, then screw on the shower wand. Tighten by hand, do not force.
What is the recommended water pressure?
The shower wand works with standard pressure. The flow rate is 2.2 GPM (8.3 L/min). Too high pressure may require a reducer.
How to clean limescale deposits?
Disassemble the shower wand and soak it in white vinegar for 30 minutes (or longer if very dirty). Gently rub the rubber nozzles. Rinse with clean water.
What to do if the shower wand leaks at the connection?
Check that the Teflon tape is properly applied. Make sure the O-ring is in place and undamaged. Tighten again, but not excessively.
Can I adjust the shower wand direction?
Yes, the rose is articulated. You can tilt the head in different directions to adjust the spray.
Is the shower wand compatible with a tankless water heater?
Yes, the shower wand is suitable for most installations. The flow rate of 8.3 L/min is compatible with standard water heaters.
How to replace clogged nozzles?
The nozzles are rubber and clean easily by rubbing. If clogged, use a fine needle to dislodge particles, then rinse.
Does the shower wand come with a wall bracket?
Yes, the kit includes a cover plate and a screw-on wall bracket. All necessary parts are supplied.
What is the difference between model FS10281 and FS10280?
The FS10281 has a square head of 12 inches and a constant temperature valve, while the FS10280 has a common valve.
Is the shower wand under warranty?
The warranty is not specified in the manual. Please contact Vevor customer service for more information.

User questions about FS10281-CP-G Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Shower head in PDF format for free! Find your manual FS10281-CP-G - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FS10281-CP-G by Vevor.

USER MANUAL FS10281-CP-G Vevor

MULTIPLE SHOWER HEADS

MODEL: FS10282-BN, FS10282-BN-G, FS10282-MB, FS10282-MB-G,

FS10281-CP, FS10281-CP-G, FS10281-BG, FS10281-BG-G,

MULTIPLE SHOWER HEADS

FS10280-BN, FS10280-BN-GFS10280-MB, FS10280-MB-GFS10281-CP, FS10281-CP-GFS10281-BG, FS10281-BG-GFS10281-MB, FS10281-MB-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 1Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 2
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 3Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 4
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 5Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 6Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 7
FS10282-BN, FS10282-BN-GFS10282-MB, FS10282-MB-GFS10283-CP, FS10283-CP-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 8Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 9
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 10Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 11 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 12
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 13 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 14 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 15
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 16 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 17Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 18
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 19 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 20

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are technology or software updates on our product.

Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 21

Warning: To reduce the risk of injury, user must read instructions manual carefully.

INSTRUCTIONS

Warning Tips:

  1. During the installation process, it is best to wear gloves to prevent sharp corners on the panel from scratching the palm of the hand.
  2. When installing the shower, ensure that all joints are fully tightened to avoid water leakage.
  3. When the shower is not in use, please close the switch valve of the shower.
  4. Not be liable for any of the following claims: 1. Damage and/or breakdown caused by improper use and/or maintenance; or any unauthorized rebuild; including any damage caused by abuse (e.g. falls, drops, etc.) 2. Hire a professional plumber. Not responsible for any damage and/or failure caused by incorrect installation. 3. Damage and/or failure caused by removal after installation or other factors.
  5. Damage and/or failure caused by applications beyond the scope of use.
  6. Damage and/or failure caused by sand, dust and other impurities
  7. Damage and/or failure caused by improper / inadequate maintenance; Rust surface treatment, etc.
  8. Damage and/or failure caused by fire, earthquake, flood, lightning and other natural disasters, pollution, harmful gas, salt, abnormal voltage, and other factors.

Installation precautions.

  1. Before installing the spool, clean the dirty water, residue, sand, and impurities remaining in the pipe before installing the spool. Do not open the protective cover before installing the spool to avoid impurities
  2. Faucets and hot and cold water pipes must be installed correctly. Facing the faucet, connect hot water on the left and cold water on the right
  3. Check the installation size. Do not forcibly install the product to avoid damaging the parts. How to Clean a shower head: In order to maintain the external brightness and good performance of the shower, please care for the shower in the following ways:

a. Rinse with water only and dry with a soft cotton cloth.

b. Place the shower head in a pot and fill the pot with enough white vinegar to cover the shower head. The acid in the vinegar helps dissolve the deposits on the

white mineral nozzle. Let the shower head soak in vinegar for 30 minutes. The dirtier the shower head, the longer you'll need to soak it in vinegar.

c. Mild liquid and colorless glass cleaner can be used to remove surface dirt and dirt film, not abrasive polish agent 4. Do not use acid detergent, insoluble granul detergent, soap, etc.

SAVE THESE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

ModelFS10280FS10281FS10282FS10283
Control ValveCommon TemperatureConstant TemperatureCommon TemperatureCommon Temperature
Head's Shower12 Inch12 Inch10 Inch10 Inch
Head's ShowerSquareStripStripStrip
Arm's Shower6 Inch6 Inch6 InchNull
Back's ShowerNullNullNull2 Inch
Flow Rate Description2.2 GPM (8.3L/min)
Pipe ThreadsNull=NPT1/2” -G=G1/2”
Color-BN=Brushed Nickel, -MB=Matte Black,-BG=Brushed Gold, -CP=Chrome Plating,

PARTS LIST

Tools you may need

WrenchVevor FS10281-CP-G - Tools you may need - 1

ScrewdriverVevor FS10281-CP-G - Tools you may need - 2

Teflon TapeVevor FS10281-CP-G - Tools you may need - 3

Install Accessories
Hexagon Wrench (1pcs)Teflon Tape (1pcs)Screws (4pcs)Bolt (4pcs)Flat (4pcs)
Vevor FS10281-CP-G - Tools you may need - 4Vevor FS10281-CP-G - Tools you may need - 5Vevor FS10281-CP-G - Tools you may need - 6Vevor FS10281-CP-G - Tools you may need - 7Vevor FS10281-CP-G - Tools you may need - 8

Technical line drawing of a mechanical control box with multiple circular components and mounting brackets (no text or symbols)

FS10281

Parts included

Technical line drawing of a mechanical housing or bracket with mounting holes and internal components (no text or symbols)

① Faucet Body

Simple diagram of a square with four circular holes and one circle inside (no text or symbols)

② Panel

③ ShowerheadVevor FS10281-CP-G - Parts included - 3

④ Shower armVevor FS10281-CP-G - Parts included - 4

⑤ ShowerheadVevor FS10281-CP-G - Parts included - 5

Pure technical line drawing of mechanical components without any text or symbols

⑥ Shower Socket

⑦ Shower HoseVevor FS10281-CP-G - Parts included - 7

⑧ ShowerheadVevor FS10281-CP-G - Parts included - 8

Vevor FS10281-CP-G - Parts included - 9

⑨ Shower armVevor FS10281-CP-G - Parts included - 10

Technical line drawing of a mechanical or electrical component with three circular ports and a rectangular base (no text or symbols)

FS10280

FS10282

FS10283

Parts included

Technical line drawing of a mechanical component with mounting holes and internal slots (no text or symbols)

① Faucet Body

Simple line drawing of a rectangular frame with three circular cutouts and a centered square (no text or symbols)

② Panel

③ HandleVevor FS10281-CP-G - Parts included - 3

④ ShowerheadVevor FS10281-CP-G - Parts included - 4

⑤ Shower armVevor FS10281-CP-G - Parts included - 5

Technical line drawing of a handheld device with a mesh cover and two side views (no text or symbols)

⑥ Showerhead

Pure technical line drawing of mechanical components without any text or symbols

⑦ Shower Socket

⑧ Shower HoseVevor FS10281-CP-G - Parts included - 8

⑨ ShowerheadVevor FS10281-CP-G - Parts included - 9

+

⑩ Shower armVevor FS10281-CP-G - Parts included - 10

⑨ Back Spray*6Vevor FS10281-CP-G - Parts included - 11

Suggested Installation DimensionsShower Head Shower Head 5.5-6.3' Shower Handset 39.3-47.2' 11.8-15.7' 47.2-59' 43.3-51.1' 7.8-9.8' HOT COLD (Hot water inlet) (Cold water inlet) Finish surface

  1. According to the site conditions and installation size requirements, make a hole with dimensions of 7 inches (length) x 5.5 inches (width) x 2.75-3.15 inches (depth).

Isometric line drawing of a mechanical or architectural component with no text or symbols

  1. According to the site conditions and installation size requirements, set up the pipe line. (2) Connect the plastic box to the pipe, place the plastic box on the hole, then adjust the levels (the bubble in the middle of the leveler). (3) Make the positioning holes.

Technical line drawing of a mechanical device with multiple ports and mounting brackets (no text or symbols)

outlet 1 outlet 2 outlet 3 hot water inlet cold water inlet

  1. Remove the protective cover when the finished wall is completed and install the escutcheon (B) to the valve (A) and press it against the finished wall. Then, install the handle (C), tighten set screws (E) with Allen key (F), and put on the indication buttons (G).

Technical diagram showing two mechanical assembly setups labeled A and B, with components like probes, switches, and gauges marked.

  1. Turn the water on for 1 minute to flush any debris. Apply Teflon tape to the threaded tail pipe and install the shower hose (I) into the outlet of the wall. Then connect the top shower (P) to the spout.

H I P

H I P

  1. Apply Teflon tape (H) to the thread end, then fix the cover plate (D) onto the wall supply holder (K) and screw the wall supply holder (K) into the hand shower outlet. Then screw (E) with Allen key (F).
  2. The distance between the bottom of the opening and the surface of the tile is 30mm. Twist the nozzle to the pipe embedded in the wall.

Technical diagram showing mechanical assembly with labeled parts K, E, F, H, and J, including directional arrows and a hand holding a ring.

Line drawing of a hand holding a coiled cable connected to a square component with a grid pattern (no text or symbols)

Product Usage

Simple diagram with three circles above a small circle and a small square on the right (no text or symbols)

Rotating temperature control key switch

Simple diagram with three circles above a rectangular frame and dashed lines forming a triangular shape (no text or symbols)

Rotating temperature control key switch

CLEANING

  1. To maintain proper working conditions, cleaning is required when mineral deposits appear on spray nozzles. To clean mineral deposits, gently rub rubber nozzles on the face of the shower head to dislodge.
  2. To clean heavier deposits, remove the shower head and soak face down in a cup of white vinegar for 2-3 hours. Replace the shower head and run in each spray setting to flush out vinegar. DO NOT use harsh chemicals, heavy-duty cleaners, or abrasives. This may damage parts or the finished product and may void the warranty.

Vevor FS10281-CP-G - CLEANING - 1

Vevor FS10281-CP-G - CLEANING - 2

Vevor FS10281-CP-G - CLEANING - 3

Vevor FS10281-CP-G - CLEANING - 4

Vevor FS10281-CP-G - CLEANING - 5

Warning symbol image showing a bottle with hazard symbol and crossed-out X signs

Abstract black cross symbol on a textured gray background (no text or symbols)

Close-up of a fingerprint pattern with no visible text or symbols

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

MODEL: FS10282-BN, FS10282-BN-G, FS10282-MB, FS10282-MB-G,

FS10281-CP, FS10281-CP-G, FS10281-BG, FS10281-BG-G,

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

FS10280-BN, FS10280-BN-GFS10280-MB, FS10280-MB-GFS10281-CP, FS10281-CP-GFS10281-BG, FS10281-BG-GFS10281-MB, FS10281-MB-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 1Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 2
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 3Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 4
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 5
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 6Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 7
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 8
FS10282-BN, FS10282-BN-GFS10282-MB, FS10282-MB-GFS10283-CP, FS10283-CP-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 9Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 10
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 11Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 12 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 13
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 14 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 15 [ZCCCA]
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 16Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 17

FS10281

Parts included

Technical line drawing of a mechanical housing or bracket with mounting flanges and internal components (no text or symbols)

① Faucet Body

Simple diagram of a square with three circles and one circle inside, no text or symbols present.

② Panel

③ ShowerheadVevor FS10281-CP-G - Parts included - 3

④ Shower armVevor FS10281-CP-G - Parts included - 4

⑤ ShowerheadVevor FS10281-CP-G - Parts included - 5

Pure technical line drawing of mechanical components without any text or symbols

⑥ Shower Socket

⑦ Shower HoseVevor FS10281-CP-G - Parts included - 7

⑧ ShowerheadVevor FS10281-CP-G - Parts included - 8

Vevor FS10281-CP-G - Parts included - 9

⑨ Shower armVevor FS10281-CP-G - Parts included - 10

Technical line drawing of a mechanical or electrical component with three circular ports and a rectangular base (no text or symbols)

FS10280

FS10282

FS10283

Parts included

Technical line drawing of a mechanical component with mounting holes and internal slots (no text or symbols)

① Faucet Body

Simple line drawing of a rectangular frame with three circular cutouts and a centered square (no text or symbols)

② Panel

③ HandleVevor FS10281-CP-G - Parts included - 3

④ ShowerheadVevor FS10281-CP-G - Parts included - 4

⑤ Shower armVevor FS10281-CP-G - Parts included - 5

Technical line drawing of a handheld device with a mesh cover and two side views (no text or symbols)

⑥ Showerhead

Pure technical line drawing of mechanical components without any text or symbols

⑦ Shower Socket

⑧ Shower HoseVevor FS10281-CP-G - Parts included - 8

⑨ ShowerheadVevor FS10281-CP-G - Parts included - 9

+

⑩ Shower armVevor FS10281-CP-G - Parts included - 10

⑨ Back Spray*6Shower Head Shower Head 5.5-6.3' Shower Handset 39.3-47.2' 11.8-15.7' 47.2-59' 43.3-51.1' 7.8-9.8' HOT COLD (Hot water inlet) (Cold water inlet) Finish surface

Outlet 1 Outlet 2 Outlet 3 Hot water inlet Cold water inlet

Line drawing of a hand holding a coiled cable connected to a square panel with a grid pattern (no text or symbols)

Rotating temperature control Key switch

Simple diagram with three circles above a rectangular frame and dashed lines forming a cross shape (no text or symbols)

Rotating temperature control Key switch

CLEANING

Lieu, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Vevor FS10281-CP-G - CLEANING - 1

VEVOR

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

MODEL: FS10282-BN, FS10282-BN-G, FS10282-MB, FS10282-MB-G,

FS10281-CP, FS10281-CP-G, FS10281-BG, FS10281-BG-G,

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

FS10280-BN, FS10280-BN-GFS10280-MB, FS10280-MB-GFS10281-CP, FS10281-CP-GFS10281-BG, FS10281-BG-GFS10281-MB, FS10281-MB-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 1Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 2
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 3Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 4
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 5
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 6Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 7
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 8
FS10282-BN, FS10282-BN-GFS10282-MB, FS10282-MB-GFS10283-CP, FS10283-CP-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 9Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 10
[WTIT]Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 11 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 12
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 13 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 14 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 15
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 16
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 17Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 18 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 19

FS10281

Parts included

Technical line drawing of a mechanical housing or bracket with mounting holes and internal components (no text or symbols)

① Faucet Body

Simple diagram of a square with four circular holes and one circle inside (no text or symbols)

② Panel

③ ShowerheadVevor FS10281-CP-G - Parts included - 3

④ Shower armVevor FS10281-CP-G - Parts included - 4

⑤ ShowerheadVevor FS10281-CP-G - Parts included - 5

Pure technical line drawing of mechanical components without any text or symbols

⑥ Shower Socket

⑦ Shower HoseVevor FS10281-CP-G - Parts included - 7

⑧ ShowerheadVevor FS10281-CP-G - Parts included - 8

Vevor FS10281-CP-G - Parts included - 9

⑨ Shower armVevor FS10281-CP-G - Parts included - 10

Technical line drawing of a mechanical or electrical component with three circular ports and a rectangular base (no text or symbols).

FS10280

FS10282

FS10283

Parts included

Technical line drawing of a mechanical component with mounting holes and internal slots (no text or symbols).

① Faucet Body

Simple line drawing of a rectangular frame with three circular cutouts and a centered square (no text or symbols).

② Panel

③ HandleVevor FS10281-CP-G - Parts included - 3

④ ShowerheadVevor FS10281-CP-G - Parts included - 4

⑤ Shower armVevor FS10281-CP-G - Parts included - 5

Technical line drawing of a handheld device with a mesh cover and labeled 'OR' (no text or symbols on the device itself).

⑥ Showerhead

Pure technical line drawing of mechanical components without any text or symbols.

⑦ Shower Socket

⑧ Shower HoseVevor FS10281-CP-G - Parts included - 8

⑨ ShowerheadVevor FS10281-CP-G - Parts included - 9

+

⑩ Shower armVevor FS10281-CP-G - Parts included - 10

⑨ Back Spray*6Shower Head Shower Head 5.5-6.3' Shower Handset 39.3-47.2' 11.8-15.7' 47.2-59' 43.3-51.1' 7.8-9.8' HOT COLD (Hot water inlet) (Cold water inlet) Finish surface

outlet 1 outlet 2 outlet 3 hot water inlet cold water inlet

Key switch Rotating temperature control

Simple diagram with three circles above a rectangular frame and dashed lines forming a cross shape (no text or symbols).

Key switch Rotating temperature control

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Vevor FS10281-CP-G - Parts included - 14

VEVOR

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

MODEL: FS10282-BN, FS10282-BN-G, FS10282-MB, FS10282-MB-G,

FS10281-CP, FS10281-CP-G, FS10281-BG, FS10281-BG-G,

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

FS10280-BN, FS10280-BN-GFS10280-MB, FS10280-MB-GFS10281-CP, FS10281-CP-GFS10281-BG, FS10281-BG-GFS10281-MB, FS10281-MB-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 1Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 2
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 3Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 4
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 5Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 6Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 7
FS10282-BN, FS10282-BN-GFS10282-MB, FS10282-MB-GFS10283-CP, FS10283-CP-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 8Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 9
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 10Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 11 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 12
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 13 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 14 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 15
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 16Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 17
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 18Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 19 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 20

FS10281

Parts included

Technical line drawing of a mechanical housing or bracket with mounting flanges and internal components (no text or symbols).

① Faucet Body

Simple diagram of a square with four circular holes and one circle inside (no text or symbols).

② Panel

③ ShowerheadVevor FS10281-CP-G - Parts included - 3

④ Shower armVevor FS10281-CP-G - Parts included - 4

⑤ ShowerheadVevor FS10281-CP-G - Parts included - 5

Pure technical line drawing of mechanical components without any text or symbols.

⑥ Shower Socket

⑦ Shower HoseVevor FS10281-CP-G - Parts included - 7

⑧ ShowerheadVevor FS10281-CP-G - Parts included - 8

Vevor FS10281-CP-G - Parts included - 9

⑨ Shower armVevor FS10281-CP-G - Parts included - 10

Technical line drawing of a mechanical or electrical component with three circular ports and a rectangular base (no text or symbols).

FS10280

FS10282

FS10283

Parts included

Technical line drawing of a mechanical component with mounting holes and internal slots (no text or symbols).

① Faucet Body

Simple line drawing of a rectangular frame with three circular cutouts and a centered square (no text or symbols).

② Panel

③ HandleVevor FS10281-CP-G - Parts included - 3

④ ShowerheadVevor FS10281-CP-G - Parts included - 4

⑤ Shower armVevor FS10281-CP-G - Parts included - 5

Technical line drawing of a handheld device with a mesh cover and two side views (no text or symbols).

⑥ Showerhead

Pure technical line drawing of mechanical components without any text or symbols.

⑦ Shower Socket

⑧ Shower HoseVevor FS10281-CP-G - Parts included - 8

⑨ ShowerheadVevor FS10281-CP-G - Parts included - 9

+

⑩ Shower armVevor FS10281-CP-G - Parts included - 10

⑨ Back Spray*6Shower Head, Shower Head, 5.5-6.3', Shower Handset, 39.3-47.2', 11.8-15.7', 47.2-59', 43.3-51.1', 7.8-9.8', HOT, COLD, (Hot water inlet), (Cold water inlet), Finish surface.

Outlet 1, outlet 2, outlet 3, hot water inlet, cold water inlet.

Line drawing of a hand holding a coiled cable connected to a square mechanical component with a grid pattern (no text or symbols).

Rotating temperature control Key switch

Simple diagram with three circles above a rectangular frame and dashed lines forming a cross shape (no text or symbols).

Rotating temperature control Key switch

CLEANING

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Vevor FS10281-CP-G - CLEANING - 1

VEVOR

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

MODEL: FS10282-BN, FS10282-BN-G, FS10282-MB, FS10282-MB-G,

FS10281-CP, FS10281-CP-G, FS10281-BG, FS10281-BG-G,

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

FS10280-BN, FS10280-BN-GFS10280-MB, FS10280-MB-GFS10281-CP, FS10281-CP-GFS10281-BG, FS10281-BG-GFS10281-MB, FS10281-MB-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 1Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 2
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 3Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 4
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 5
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 6Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 7
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 8
FS10282-BN, FS10282-BN-GFS10282-MB, FS10282-MB-GFS10283-CP, FS10283-CP-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 9Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 10
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 11Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 12 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 13
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 14 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 15 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 16
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 17 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 18Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 19 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 20 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 21

FS10281

Parts included

Technical line drawing of a mechanical housing or bracket with mounting flanges and internal components (no text or symbols).

① Faucet Body

Simple diagram of a square with four circular holes and one circle inside (no text or symbols).

②Panel

③ShowerheadVevor FS10281-CP-G - Parts included - 3

④Shower armVevor FS10281-CP-G - Parts included - 4

⑤ShowerheadVevor FS10281-CP-G - Parts included - 5

Pure technical line drawing of mechanical components without any text or symbols.

⑥Shower Socket

⑦Shower HoseVevor FS10281-CP-G - Parts included - 7

⑧ShowerheadVevor FS10281-CP-G - Parts included - 8

Vevor FS10281-CP-G - Parts included - 9

⑨Shower armVevor FS10281-CP-G - Parts included - 10

Technical line drawing of a mechanical or electrical component with three circular ports and a rectangular base (no text or symbols).

FS10280

FS10282

FS10283

Parts included

Technical line drawing of a mechanical component with mounting holes and internal structure (no text or symbols).

① Faucet Body

Simple line drawing of a rectangular frame with three circular cutouts and a centered square (no text or symbols).

②Panel

③HandleVevor FS10281-CP-G - Parts included - 3

④ShowerheadVevor FS10281-CP-G - Parts included - 4

⑤Shower armVevor FS10281-CP-G - Parts included - 5

Technical line drawing of a handheld device with a mesh cover and two side views (no text or symbols).

⑥Showerhead

Pure technical line drawing of mechanical components without any text or symbols.

⑦Shower Socket

⑧Shower HoseVevor FS10281-CP-G - Parts included - 8

⑨ShowerheadVevor FS10281-CP-G - Parts included - 9

+

⑩Shower armVevor FS10281-CP-G - Parts included - 10

⑨Back Spray*6Shower Head Shower Head 5.5-6.3' Shower Handset 39.3-47.2' 11.8-15.7' 47.2-59' 43.3-51.1' 7.8-9.8' HOT COLD (Hot water inlet) (Cold water inlet) Finish surface

outlet 1 outlet 2 outlet 3 hot water inlet cold water inlet

Key switch Rotating temperature control

Simple diagram with three circles above a rectangular frame and dashed lines forming a cross shape (no text or symbols)

Key switch Rotating temperature control

CLEANING

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Vevor FS10281-CP-G - CLEANING - 1

VEVOR

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

MODEL: FS10282-BN, FS10282-BN-G, FS10282-MB, FS10282-MB-G,

FS10281-CP, FS10281-CP-G, FS10281-BG, FS10281-BG-G,

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

FS10280-BN, FS10280-BN-GFS10280-MB, FS10280-MB-GFS10281-CP, FS10281-CP-GFS10281-BG, FS10281-BG-GFS10281-MB, FS10281-MB-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 1Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 2
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 3Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 4
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 5
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 6Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 7
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 8
FS10282-BN, FS10282-BN-GFS10282-MB, FS10282-MB-GFS10283-CP, FS10283-CP-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 9Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 10
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 11Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 12 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 13
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 14 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 15 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 16
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 17Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 18

FS10281

Parts included

Technical line drawing of a mechanical housing or bracket with mounting flanges and internal components (no text or symbols)

① Faucet Body

Simple diagram of a square with four circular holes and one circle inside (no text or symbols)

②Panel

③ ShowerheadVevor FS10281-CP-G - Parts included - 3

④ Shower armVevor FS10281-CP-G - Parts included - 4

⑤ ShowerheadVevor FS10281-CP-G - Parts included - 5

Pure technical line drawing of mechanical components without any text, numbers, or symbols

⑥ Shower socket

⑦ Shower hoseVevor FS10281-CP-G - Parts included - 7

⑧ ShowerheadVevor FS10281-CP-G - Parts included - 8

Vevor FS10281-CP-G - Parts included - 9

⑨ Shower armVevor FS10281-CP-G - Parts included - 10

Technical line drawing of a mechanical or electrical component with three circular ports and a rectangular base (no text or symbols)

FS10280

FS10282

FS10283

Parts included

Technical line drawing of a mechanical component with mounting holes and internal slots (no text or symbols)

① Faucet body

Simple line drawing of a rectangular frame with three circular cutouts and a centered square (no text or symbols)

② Panel

③ HandleVevor FS10281-CP-G - Parts included - 3

④ ShowerheadVevor FS10281-CP-G - Parts included - 4

⑤ Shower armVevor FS10281-CP-G - Parts included - 5

Technical line drawing of a handheld device with a mesh cover and two side views (no text or symbols)

⑥ Showerhead

Pure technical line drawing of mechanical components without any text or symbols

⑦ Shower socket

⑧ Shower hoseVevor FS10281-CP-G - Parts included - 8

⑨ ShowerheadVevor FS10281-CP-G - Parts included - 9

+

⑩ Shower armVevor FS10281-CP-G - Parts included - 10

⑨ Back spray *6Shower Head Shower Head 5.5-6.3' Shower Handset 39.3-47.2' 11.8-15.7' 47.2-59' 43.3-51.1' 7.8-9.8' HOT COLD (Hot water inlet) (Cold water inlet) Finish surface

outlet 1 outlet 2 outlet 3 hot water inlet cold water inlet

Key switch rotating temperature control

Simple diagram with three circles above a rectangular frame and dashed lines forming a cross pattern (no text or symbols).

Key switch rotating temperature control

CLEANING

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Vevor FS10281-CP-G - CLEANING - 1

VEVOR

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

MODEL: FS10282-BN, FS10282-BN-G, FS10282-MB, FS10282-MB-G,

FS10281-CP, FS10281-CP-G, FS10281-BG, FS10281-BG-G,

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

FS10280-BN, FS10280-BN-GFS10280-MB, FS10280-MB-GFS10281-CP, FS10281-CP-GFS10281-BG, FS10281-BG-GFS10281-MB, FS10281-MB-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 1Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 2
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 3Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 4
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 5
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 6Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 7
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 8
FS10282-BN, FS10282-BN-GFS10282-MB, FS10282-MB-GFS10283-CP, FS10283-CP-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 9Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 10
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 11Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 12 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 13
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 14 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 15 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 16
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 17Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 18
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 19Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 20 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 21

FS10281

Parts included

Technical line drawing of a mechanical housing or bracket with mounting flanges and internal components (no text or symbols).

① Faucet Body

Simple diagram of a square with four circular holes and one circle inside (no text or symbols).

②Panel

③ShowerheadVevor FS10281-CP-G - Parts included - 3

④Shower armVevor FS10281-CP-G - Parts included - 4

⑤ ShowerheadVevor FS10281-CP-G - Parts included - 5

Pure technical line drawing of mechanical components without any text or symbols.

⑥ Shower Socket

⑦ Shower HoseVevor FS10281-CP-G - Parts included - 7

⑧ ShowerheadVevor FS10281-CP-G - Parts included - 8

Vevor FS10281-CP-G - Parts included - 9

⑨ Shower armVevor FS10281-CP-G - Parts included - 10

Technical line drawing of a mechanical or electrical component with three circular ports and a rectangular base (no text or symbols).

FS10280

FS10282

FS10283

Parts included

Technical line drawing of a mechanical component with mounting holes and a central housing (no text or symbols).

① Faucet Body

Simple line drawing of a rectangular frame with three circular cutouts and a centered square (no text or symbols).

② Panel

③ HandleVevor FS10281-CP-G - Parts included - 3

④ ShowerheadVevor FS10281-CP-G - Parts included - 4

⑤ Shower armVevor FS10281-CP-G - Parts included - 5

Technical line drawing of a handheld device with a mesh cover and two side views (no text or symbols).

⑥ Showerhead

Pure technical line drawing of mechanical components without any text or symbols.

⑦ Shower Socket

⑧ Shower HoseVevor FS10281-CP-G - Parts included - 8

⑨ ShowerheadVevor FS10281-CP-G - Parts included - 9

+

⑩ Shower armVevor FS10281-CP-G - Parts included - 10

⑨ Back Spray*6Shower Head Shower Head 5.5-6.3' Shower Handset 39.3-47.2' 11.8-15.7' 47.2-59' 43.3-51.1' 7.8-9.8' HOT COLD (Hot water inlet) (Cold water inlet) Finish surface

Outlet 1 Outlet 2 Outlet 3 Hot water inlet Cold water inlet

Key switch Rotating temperature control

Simple diagram with three circles above a rectangular frame and dashed lines forming a cross shape (no text or symbols)

Key switch Rotating temperature control

CLEANING

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Vevor FS10281-CP-G - CLEANING - 1

VEVOR

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

MODEL: FS10282-BN, FS10282-BN-G, FS10282-MB, FS10282-MB-G,

FS10281-CP, FS10281-CP-G, FS10281-BG, FS10281-BG-G,

Affordable. Reliable. Home Improvement.

MULTIPLE SHOWER HEADS

FS10280-BN, FS10280-BN-GFS10280-MB, FS10280-MB-GFS10281-CP, FS10281-CP-GFS10281-BG, FS10281-BG-GFS10281-MB, FS10281-MB-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 1Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 2
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 3Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 4
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 5
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 6Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 7
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 8
FS10282-BN, FS10282-BN-GFS10282-MB, FS10282-MB-GFS10283-CP, FS10283-CP-G
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 9Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 10
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 11Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 12 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 13
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 14 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 15 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 16
Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 17Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 18Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 19 Vevor FS10281-CP-G - MULTIPLE SHOWER HEADS - 20

FS10281

Parts included

Technical line drawing of a mechanical housing or bracket with mounting flanges and internal components (no text or symbols)

① Faucet Body

Simple diagram of a square with four circular holes and one circle inside (no text or symbols)

② Panel

③ ShowerheadVevor FS10281-CP-G - Parts included - 3

④ Shower armVevor FS10281-CP-G - Parts included - 4

⑤ ShowerheadVevor FS10281-CP-G - Parts included - 5

Pure technical line drawing of mechanical components without any text or symbols

⑥ Shower Socket

⑦ Shower HoseVevor FS10281-CP-G - Parts included - 7

⑧ Showerhead +Vevor FS10281-CP-G - Parts included - 8

⑨ Shower armVevor FS10281-CP-G - Parts included - 9

Technical line drawing of a mechanical or electrical component with three circular ports and a rectangular base (no text or symbols)

FS10280

FS10282

FS10283

Parts included

Technical line drawing of a mechanical component with mounting holes and internal slots (no text or symbols)

① Faucet Body

Simple line drawing of a rectangular frame with three circular cutouts and a centered square (no text or symbols)

② Panel

③ HandleVevor FS10281-CP-G - Parts included - 3

④ ShowerheadVevor FS10281-CP-G - Parts included - 4

⑤ Shower armVevor FS10281-CP-G - Parts included - 5

Technical line drawing of a handheld device with a mesh cover and two side views (no text or symbols)

⑥ Showerhead

Pure technical line drawing of mechanical components without any text or symbols

⑦ Shower Socket

⑧ Shower HoseVevor FS10281-CP-G - Parts included - 8

⑨ShowerheadVevor FS10281-CP-G - Parts included - 9

+

⑩Shower armVevor FS10281-CP-G - Parts included - 10

⑨Back Spray*6Shower Head Shower Head 5.5-6.3' Shower Handset 39.3-47.2' 11.8-15.7' 47.2-59' 43.3-51.1' 7.8-9.8' HOT COLD (Hot water inlet) (Cold water inlet) Finish surface

Outlet 1 Outlet 2 Outlet 3 Hot water inlet Cold water inlet

Line drawing of a hand holding a coiled cable connected to a square component with a grid pattern (no text or symbols).

Product Use

Simple diagram with three circles above a small circle and a small square on the right (no text or symbols).

Rotating temperature control Key switch

Simple diagram with three circles above a rectangular frame and dashed lines forming a cross pattern (no text or symbols).

Rotating temperature control Key switch

CLEANING

Cross-shaped symbol with a black 'X' on a textured gray background (no text or numbers).

Close-up of a fingerprint pattern with no visible text or symbols.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Vevor FS10281-CP-G - CLEANING - 3

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : FS10281-CP-G

Category : Shower head