DOP259 - Pasta machine LIVOO - Free user manual and instructions

USER MANUAL DOP259 LIVOO

Thank you for choosing a Livoo product!

The collaboration between Marmiton and Livoo is a breath of fresh air. By exploring our shared expertise, we've come up with a product that will simplify your life in the kitchen. How do we do it? By slipping you 15 gourmet recipes with your new pasta maker. Simply scan the Qr code on the product to access the recipes at any time. The product is adorned with coral buttons, Marmiton's signature color, to bring a positive touch to your kitchen. Find our entire collection on our website www.livoo.en.

Livoo, your daily companion till social networks

@Livoo

@livoo_officiel

@Livoo

Safety Instructions

Please, take time to read well the instruction sheet before the first use and keep them for a future use.

A misuse of the appliance can damage it or hurt the user. Assure that you use the appliance for the use for which it is designed. We refuse any responsibilities as for the damages by an incorrect use or a bad manipulation.

1. This device is intended for making and processing pasta dough.

2. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.

3. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards.

4. Children shall not play with the appliance.
5. This device is for personal use only and is not intended for commercial applications.
6. The device should not be used if it is damaged.
7. There may still be some production residues on the device. To avoid harmful effects to your health, clean the device and all accessories thoroughly before using them for the first time.
8. Only use fresh ingredients which have not passed their best-before date.
9. Never immerse the device, the mains plug or the cable in water or other liquids. Do not place the device near to any sink or wash basin so that the device, the mains plug and the cable cannot accidentally come into contact with water.
10. Do not touch the device, cable or mains plug with wet hands.

11. Never use the appliance outside and always place it in a dry environment.

12. Place the device on a stable, plane surface.

13. Maintain a sufficient distance from heat sources such as hobs or ovens in order not to damage the device.
14. The device should only be connected to a properly installed socket with earthing contacts. The socket must also be readily accessible after connection. The mains voltage must match the technical data for the device. Only use suitable extension cables whose technical data is the same as that of the device.
15. Ensure that it is not possible to trip over the connected mains cable. Do not allow the cable to hang over the edge of tables or kitchen counters.
16. Position the cable in such a way that it does not become squashed or bent and does not come into contact with hot surfaces.
17. Do not expose the device to extreme temperatures, strong temperature fluctuations, direct sunlight or moisture.
18. Do not insert any foreign bodies through into the housing, the slots or in the mixing container in order to prevent damage to the device. Do not introduce any objects into the ventilation slots of

the device and make sure that no objects block the ventilation slots.

1. Keep hair, body parts, jewellery and clothing away from rotating parts of the device in order to prevent injuries.
2. The device should be used only when it is fully assembled. Always make sure that the lid is placed on correctly as the device will only work properly when the mixing container lid is placed on correctly.
3. Only use accessories which are recommended by the manufacturer in order to prevent damage to the device.
4. Never leave the device unsupervised during operation.
5. Do not drop the device or allow it to be knocked violently.
6. In the event of damage/faults, switch the device off immediately.
7. Always pull the plug and never the cable.

8. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.

9. Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.

10. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard () .
11. It is absolutely necessary to keep this appliance clean at all times as it comes into direct contact with food.
12. Regarding the instructions for cleaning surfaces in contact with food or oil, thanks to refer to the below paragraph "cleaning" in the manual.
13. Regarding the instructions for cleaning, the use of accessories and operation times, thanks to refer to the below paragraphs.
14. There's a potential injury from misuse.
15. Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
16. This appliance is intended to be used in household and similar applications such as:
17. staff kitchen areas in shops, offices and other

working environments

• farm houses
• by clients in hotels, motels and other residential type environments
• bed and breakfast type environments

(*) Competent qualified electrician: after sales department of the producer or importer or any person who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In any case you should return the appliance to this electrician.

Technical characteristics

Voltage: 220V - 240V 50Hz - 60Hz Power:150W

Maximum time of use in automatic mode: 18 min / 2 minutes off

Consumption in on/off mode: 0W and in standby mode: 0.41 W. The device goes into standby mode after 30 seconds of non-use.

1	Motor base	5	Connecting part
2	Cover	6	Locking ring
3	Drive shaft	7	Bowl
4	Worm screw	8	Bowl nozzle

Assembly (figures 1 and 3)

Remove the bowl from its location. Take the different elements out of the bowl and place them in front of you. Carefully place the drive shaft in the bowl and then replace the bowl by clipping the drive shaft into the hole in the motor base. Insert the bowl nozzle into the bowl, then engage the worm screw into the drive shaft. Choose the right tip for the type of dough you want to make, insert it firmly into the connecting piece. Snap the notch of the connection piece into the notch of the outlet port of the bin and screw in the locking ring. Close the lid.

Caution: If your cover is not properly installed, the red light will stay on and two dry beeps will be heard when you want to start a mode.

Using the device (figure 2)

Make sure the appliance is in the OFF position before plugging it in.

Open the lid.

Kneading mode: add the flour to the bowl, maximum 360 grams. Use a measuring cup to measure the amount of water needed (see table). Pour the water into the bowl (with or without eggs). Close the lid and press "Kneading" and then "on/off" to begin the operation.

Egg-free recipe
Number of people	Flour	Water	Time
1-2	180gr	63ml	10min
3-4	360gr	126ml	18min
Recipe with eggs
1-2	180gr and an egg	30 ml	10min
3-4	360gr and an egg	60ml	18min

Check regularly that your mixture is homogeneous. If you lift the lid, the device pauses. Put the lid back on after checking the consistency of your dough and press the On/Off button.

After a 2-minute break without any intervention on your part, the device stops.

When the consistency of the dough is correct (it should not be too dry or too wet) you can press "extrusion" to form the pasta.

If the dough is too dry, add a little liquid (water or vegetable juice) little by little. If the dough is too wet, add flour and then press "kneading" until the dough has a suitable consistency.

Extrusion Mode: Press "Extrusion". Guide the pasta as it comes out and lay it separately on a smooth floured surface and dust flour straight out of the machine. This will prevent the pasta from sticking together. When the manufacturing process is complete, turn off and then unplug the appliance.

Auto mode: in automatic mode, the machine performs kneading and extrusion. Nevertheless, we advise you to follow the steps above and to check your dough regularly before extrusion.

If you lift the lid during this mode, you have 2 minutes to rebalance your dough and restart the automatic mode by putting the lid back on.

Note: If the ingredients are used in excessive amounts, it can cause damage to the device. If you want to make larger quantities of pasta, repeat the operation several times, respecting a break time of at least 2 minutes and an operating time of no more than 18 minutes.

Make sure the openings in the pasta piece don't clog when extruding the dough! If this is the case, turn the switch on the appliance to the OFF position and unclog them. If the dough gets stuck during kneading or if the drive shaft does not rotate evenly, unplug the unit. Open the lid to identify the reason for the blockage.

Tip: Vegetable juices made from, for example, spinach, carrots or tomatoes are ideal for adding colour to your pasta or refining the taste.

If you add a little olive oil to the dough, it will glide better and adhere less to the parts of the machine. Fresh pasta can be stored for about 1-2 days in the refrigerator and freezer. To prevent the pasta from sticking, you can put it to dry for about 1-2 hours before putting it in the fridge or freezer.

Cleaning and maintenance

Disassemble the device systematically after each use to clean it (proceed in reverse to the assembly steps above). Unplug the appliance before cleaning. Do not use corrosive or abrasive cleaning products to clean the appliance. They could damage the surface. Do not immerse the motor base in water.

Clean all accessories and bowl by hand with warm water and a mild detergent. If necessary, soak the accessories in water to better remove food residues.

Clean the motor base with a slightly damp cloth and then wipe the unit with a clean cloth.

product.

Correct disposal of the unit (Electrical and Electronic Equipment).

(Applicable in the European Union and the rest of Europe that have adopted separate collection systems countries). The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal household waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The symbol of the crossed out dustbin is marked on all products to remind the obligations of separate collection. Consumers should contact their local authority or retailer for information concerning the correct disposal of their

Non contractual illustration
- Product information is subject to change without prior notice.