YJXXGZ-007 - Entry table Vevor - Free user manual and instructions

USER MANUAL YJXXGZ-007 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SLAB ENTRYWAY TABLE USER MANUAL

MODEL NO.: YJXXGZ-007; YJXXGZ-007-1; YJXXGZ-007-2

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Slab Entryway Table

MODEL NO.: YJXXGZ-007; YJXXGZ-007-1; YJXXGZ-007-2

Line drawing of a rectangular metal frame with a vertical cable and hanging component, no text or symbols present

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure do so may result in serious injury.

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps that come the package.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly c create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3. Keep the assembly area clean and well-lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the influence of alcohol drugs or medication.

6. The product capabilities apply to properly and completely assembled products only.

7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Slab Entryway Table.

8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy Do not allow children to play with or r item.

2. Do not exceed weight capacities, before moving.

3. Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Slab Entryway Table.

4. Use as intended only.

5. Inspect before every use; do not use if parts are loose or damage

TECHNICAL SPECIFICATIONS

Model	YJXXGZ-007	YJXXGZ-007-1YJXXGZ-007-2
Rating(s)	12A 124Vac 60Hz1500W	220-240Vac,50/60Hz, 16A Max
Product Dimensions(LxWxH)(mm)	1060*295*735
Net Weight(kg)	About 7.3

*Products such as specifications, appearance, and design are subject to modification without prior notice.

PACKAGE CONTENTS

○×1 ②×1 ③[SS42]×4 ⑤ ×2 ×1 ×8	④×1
	⑧×4
⑨×1 ⑩×1 ⑪×1	⑫×2
⑬×2 ⑭×1 ⑮×1
AM6×35mm ×16 BM6×10mm ×44 C×4 D[M6 ×4
E∅3.5×12mm ×2 F×1 ×2 G×2 HM4 ×1

Technical diagram of a modular assembly with numbered components for identification and assembly reference.

ASSEMBLY STEPS

step 1

M6×10mm

B × 16pcs

graph TD
    A["Top Diagram"] --> B["Component ⑦: Arrow to top"]
    B --> C["Component ⑧: Arrow to bottom"]
    C --> D["×4"]
    D --> E["Bottom Diagram"]
    E --> F["Component ⑦: Arrow to bottom"]
    F --> G["Component ⑧: Arrow to bottom"]
    G --> H["Cross-sectional Diagram"]
    H --> I["Component ⑦: Arrow to bottom"]
    I --> J["Cross-sectional Diagram"]
    J --> K["Component ⑧: Arrow to bottom"]
    K --> L["Cross-sectional Diagram"]

step 2

ep 2 M6×10mm B × 20pcs C × 4pcs 15 B H C 14 9 10 11 6 5 4 ↓ 9 10 11 B H

step 3

A×4pcs

H A ③ ×2 12 ③

step 4

Technical diagram of a metal frame structure with numbered components and mounting holes

H B ① ③ ③

step 5

H B 14 5 15 2 7 8 7

step 6

B × 4pcs	D× 4pcs

H B 13 13 2 1 D

step 7

G× 2pcs

Technical diagram of a metal frame structure with labeled components and assembly steps

step 8

Ø3.5×12mm E× 2pcs F× 1pc

E× 2pcs F× 1pc ① ②

COMPLETION

Line drawing of a rectangular metal frame structure with supports and a hanging cable, no text or symbols present

Correct Disposal

This product is subject to the provision of european Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products mark as such may not be discarded with normal domestic waste, but must taken to a collection point for recycling electrical and electronic devices.

FCC Information:

CAUTION: Changes or modifications not expressly approved by the pa responsible for compliance could void the user's authority to operate t equipment!

This device complies with Part 15 of the FCC Rules. Operation is so the following two conditions:

1) This product may cause harmful interference.
2) This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the product.

Note: This product has been tested and found to comply with the line a Class B digital device pursuant to Part 15 of the FCC Rules; these are designed to provide reasonable protection against harmful interferer in a residential installation.

This product generates, uses and can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If product does cause harmful interference to radio or television reception which can be determined by turning the product off and on, the user encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the distance between the product and the receiver.
• Connect the product to an outlet on a circuit different from that to the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assista

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a simple metal frame structure with no text or symbols

BESOIN D'AIDE? CONTACTEZ-NOUS!

Technical diagram showing exploded view of a modular assembly with numbered components for assembly or maintenance.

ÉTAPES D'ASSEMBLAGE

step 1

M6×10mm

B × 16pcs

graph TD
    A["Top Diagram"] --> B["Component ⑦: Arrow pointing to a cylindrical rod"]
    B --> C["Component ⑧: Arrow pointing to a rectangular shaft"]
    C --> D["Downward Arrow to a multi-axis ×4 dimension"]
    D --> E["Bottom Diagram"]
    E --> F["Component ⑦: Arrow pointing to a cylindrical rod"]
    F --> G["Cross-sectional diagram with labeled parts B and H"]
    style A fill:#f9f,stroke:#333
    style E fill:#ccf,stroke:#333

step 2

ep 2 M6×10mm B × 20pcs C × 4pcs 15 B H C 14 9 10 11 6 5 4 ↓ 9 10 11 B H

step 3

A× 4pcs

H A ③ ×2 12 ③

step 4

B × 4pcs

Technical diagram of a metal frame structure with numbered annotations indicating components

H B ① ③ ③

step 5

A× 12pcs

H B 1 2 5 14 7 8 7

step 6

B × 4pcs	D× 4pcs

H B ② 13 ① 13 D

step 7

G× 2pcs

Technical diagram of a metal frame structure with labeled components and assembly steps

step 8

Ø3.5×12mm E× 2pcs F× 1pc

E× 2pcs F× 1pc ① ②

ACHÈVEMENT

Line drawing of a simple metal frame structure with support legs and a hanging cable, no text or symbols present.

Symbol of a trash bin crossed with no text or labels, accompanied by a solid black rectangle below (no text or symbols present)

A/S YH Consulting Limited Bureau 147, Centurion

Maison, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELL-NR.: YJXXGZ-007; YJXXGZ-007-1; YJXXGZ-007-2

MODELL-NR.: YJXXGZ-007; YJXXGZ-007-1; YJXXGZ-007-2

Line drawing of a simple metal frame structure with no text or symbols

Technical diagram of a modular assembly with numbered components for identification and assembly reference.

MONTAGEANLEITUNG

step 1

M6×10mm

B × 16pcs

graph TD
    A["Top Diagram"] --> B["Component ⑦: Arrow pointing to a cylindrical rod"]
    B --> C["Component ⑧: Arrow pointing to a rectangular shaft"]
    C --> D["Bottom Diagram"]
    D --> E["Component ⑦: Arrow pointing to a horizontal rod"]
    E --> F["Crossed section ×4"]
    F --> G["Bottom Panel"]
    G --> H["Component ⑧: Ring with two sensors"]
    H --> I["Component ⑦: Ring with two sensors"]
    I --> J["Crossed section B/B"]
    J --> K["Component ⑧: Ring with two sensors"]
    K --> L["Crossed section H"]

step 2

ep 2 M6×10mm B × 20pcs C × 4pcs B H C 15 5 14 9 10 11 6 5 4 ↓ 9 10 11 B H

step 3

A× 4pcs

H A ③ ×2 12 ③

step 4

B × 4pcs

Technical diagram of a metal frame structure with numbered components and mounting points

H B ① ③ ③

step 5

A× 12pcs

H B 1 2 14 5 15 7 8 7

step 6

B × 4pcs

D× 4pcs

Technical diagram of a mechanical assembly with labeled components and structural details

step 7

G× 2pcs

Technical diagram of a metal frame structure with labeled components and assembly steps

step 8

Ø3.5×12mm E× 2pcs F× 1pc

E× 2pcs F× 1pc ① ②

FERTIGSTELLUNG

Line drawing of a simple metal frame structure with a hanging cable and base, no text or symbols present

Richtige Entsorgung

Symbol of a trash bin crossed with no text or labels, accompanied by a solid black rectangle below (no text or symbols present)

C/O YH Consulting Limited Office 147, Centurion

Haus, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELLO N.: YJXXGZ-007; YJXXGZ-007-1; YJXXGZ-007-2

MODELLO N.: YJXXGZ-007; YJXXGZ-007-1; YJXXGZ-007-2

Line drawing of a simple metal frame structure with no text or symbols

Technical diagram showing 15 labeled mechanical assembly components with numbered parts for identification.

FASI DI MONTAGGIO

step 1

M6×10mm

B × 16pcs

graph TD
    A["Top Diagram"] --> B["Component ⑦: Arrow pointing to a cylindrical rod"]
    B --> C["Component ⑧: Arrow pointing to a rectangular rod"]
    C --> D["Bottom View: Component ⑦: Arrow pointing to a cylindrical rod"]
    D --> E["Crossing ⑦ ×4"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333

step 2

ep 2 M6×10mm B × 20pcs C × 4pcs B H C 15 5 14 9 10 11 6 5 4 ↓ 9 10 11 B H

step 3

A× 4pcs

H A ③ ×2 12 ③

step 4

B × 4pcs

Technical diagram of a metal frame structure with numbered components and mounting points

H B ① ③ ③

step 5

A× 12pcs

H B 1 2 14 5 15 7 8 7

step 6

	[5×5C]
B × 4pcs	D× 4pcs

Technical diagram of a mechanical assembly with labeled components and structural details

step 7

G× 2pcs

Technical diagram of a metal frame structure with labeled components and assembly steps

step 8

Ø3.5×12mm E× 2pcs F× 1pc

E× 2pcs F× 1pc ① ②

COMPLETAMENTO

Line drawing of a simple metal frame structure with support legs and a hanging cable, no text or symbols present

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

Nuovo Galles del Sud 2122 Australia

C/O YH Consulting Limited Ufficio 147, Centurion

Casa, London Road, Staines-upon-Thames, Surrey, TW184AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a simple metal frame structure with no text or symbols

Technical diagram showing 15 labeled mechanical assembly components with numbered parts for identification.

PASOS DE MONTAJE

step 1

M6×10mm

B × 16pcs

graph TD
    A["Top Diagram"] --> B["Component ⑦: Arrow pointing to a cylindrical rod"]
    B --> C["Component ⑧: Arrow pointing to a rectangular rod"]
    C --> D["Bottom View: Component ⑦: Arrow pointing to a cylindrical rod"]
    D --> E["Crossing ⑦ ×4"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333

step 2

ep 2 M6×10mm B × 20pcs C × 4pcs B H C 15 5 14 9 10 11 6 5 4 ↓ 9 10 11 B H

step 3

A× 4pcs

H A ③ ×2 12 ③

step 4

B × 4pcs

Technical diagram of a metal frame structure with numbered components and mounting points

H B ① ③ ③

step 5

A× 12pcs

H B 1 2 5 14 7 8 7

step 6

B × 4pcs	D× 4pcs

Technical diagram of a mechanical assembly with labeled components and structural details

step 7

G× 2pcs

Technical diagram of a metal frame structure with labeled components and assembly steps

step 8

Ø3.5×12mm E× 2pcs F× 1pc

E× 2pcs F× 1pc ① ②

TERMINACIÓN

Line drawing of a simple metal frame structure with support legs and a hanging cable, no text or symbols present

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Casa, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL NO.: YJXXGZ-007; YJXXGZ-007-1; YJXXGZ-007-2

MODEL NO.: YJXXGZ-007; YJXXGZ-007-1; YJXXGZ-007-2

Line drawing of a simple metal frame structure with no text or symbols

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

Technical diagram of a modular assembly with numbered components for identification and assembly reference.

KROKI MONTAŻU

step 1

M6×10mm

B × 16pcs

graph TD
    A["Top Diagram"] --> B["Component ⑦: Arrow pointing to a cylindrical rod"]
    B --> C["Component ⑧: Arrow pointing to a rectangular shaft"]
    C --> D["Bottom Diagram"]
    D --> E["Component ⑦: Arrow pointing to a horizontal rod"]
    E --> F["Crossed section ×4"]
    F --> G["Bottom Panel"]
    G --> H["Component ⑧: Ring with two sensors"]
    H --> I["Component ⑦: Ring with two sensors"]
    I --> J["Crossed section B/B"]
    J --> K["Component ⑧: Ring with two sensors"]
    K --> L["Crossed section H"]

step 2

ep 2 M6×10mm B × 20pcs C × 4pcs B H C 15 5 14 9 10 11 6 5 4 ↓ 9 10 11 B H

step 3

A× 4pcs

H A ③ ×2 12 ③

step 4

B × 4pcs

Technical diagram of a metal frame structure with numbered components and mounting points

H B ① ③ ③

step 5

A× 12pcs

H B 1 2 5 14 7 8 7

step 6

B × 4pcs	D× 4pcs

H B ② 13 ① 13 D

step 7

G× 2pcs

Technical diagram of a metal frame structure with labeled components and assembly steps

step 8

Ø3.5×12mm E× 2pcs F× 1pc

E× 2pcs F× 1pc ① ②

UKOŃCZENIE

Line drawing of a simple metal frame structure with support legs and a hanging cable, no text or symbols present.

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

C/O YH Consulting Limited Biuro 147, Centurion Dom, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELNR.: YJXXGZ-007; YJXXGZ-007-1; YJXXGZ-007-2

MODELNR.: YJXXGZ-007; YJXXGZ-007-1; YJXXGZ-007-2

Line drawing of a simple metal frame structure with no text or symbols

HULP NODIG? NEEM CONTACT MET ONS OP!

Technical diagram showing 15 labeled mechanical assembly components with numbered parts for identification.

MONTAGESTAPPEN

step 1

M6×10mm

B × 16pcs

graph TD
    A["Top Diagram"] --> B["Component ⑦: Arrow pointing to a cylindrical rod"]
    B --> C["Component ⑧: Arrow pointing to a rectangular rod"]
    C --> D["Bottom View: Component ⑦: Arrow pointing to a cylindrical rod"]
    D --> E["Crossing ⑦ ×4"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333

step 2

ep 2 M6×10mm B × 20pcs C × 4pcs B H C 15 5 14 9 10 11 6 5 4 ↓ 9 10 11 B H

step 3

A× 4pcs

H A ③ ×2 12 ③

step 4

B × 4pcs

Technical diagram of a metal frame structure with numbered components and mounting points

H B ① ③ ③

step 5

A× 12pcs

H B 1 2 5 14 7 8 7

step 6

B × 4pcs	D× 4pcs

H B ② 13 ① 13 D

step 7

G× 2pcs

Technical diagram of a metal frame structure with labeled components and assembly steps

step 8

Ø3.5×12mm E× 2pcs F× 1pc

E× 2pcs F× 1pc ① ②

VOLTOOIING

Line drawing of a simple metal frame structure with support legs and a hanging cable, no text or symbols present.

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

C/O YH Consulting Limited Kantoor 147, Centurion Huis, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELLNR: YJXXGZ-007; YJXXGZ-007-1; YJXXGZ-007-2

MODELLNR: YJXXGZ-007; YJXXGZ-007-1; YJXXGZ-007-2

Line drawing of a simple metal frame structure with no text or symbols

BEHÖVER HJÄLP? KONTAKTA OSS!

Technical diagram showing exploded view of a modular assembly with numbered components for assembly or maintenance.

MONTERINGSSEG

step 1

M6×10mm

B × 16pcs

graph TD
    A["Top Diagram"] --> B["Component ⑦: Arrow pointing to a cylindrical rod"]
    B --> C["Component ⑧: Arrow pointing to a rectangular shaft"]
    C --> D["Bottom Diagram"]
    D --> E["Component ⑦: Arrow pointing to a horizontal rod"]
    E --> F["Crossed section ×4"]
    F --> G["Bottom Panel"]
    G --> H["Component ⑧: Ring with two springs"]
    H --> I["Component ⑦: Ring with two springs"]
    I --> J["Crossed section B/B"]
    J --> K["Component ⑧: Ring with two springs"]
    K --> L["Crossed section H"]

step 2

ep 2 M6×10mm B × 20pcs C × 4pcs B H C 15 5 14 9 10 11 6 5 4 ↓ 9 10 11 B H

step 3

A× 4pcs

H A ③ ×2 12 ③

step 4

B × 4pcs

Technical diagram of a metal frame structure with numbered components and mounting points

H B ① ③ ③

step 5

A× 12pcs

H B 1 2 5 14 7 8 7

step 6

B × 4pcs	D× 4pcs

H B ② 13 ① 13 D

step 7

G× 2pcs

Technical diagram of a metal frame structure with labeled components and assembly steps

step 8

Ø3.5×12mm E× 2pcs F× 1pc

E× 2pcs F× 1pc ① ②

KOMPLETTERING

Line drawing of a simple metal frame structure with support legs and a hanging cable, no text or symbols present

Korrekt avfallshantering

Symbol of a trash bin crossed with no text or labels, accompanied by a solid black rectangle below (no text or symbols present)

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support