TE23K1001 - Shower bench Vevor - Free user manual and instructions

USER MANUAL TE23K1001 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

CORNER SHOWER BENCH

MODEL:TE23K1001

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

CORNER SHOWER BENCH

MODEL:TE23K1001

Line drawing of a symmetrical mechanical or architectural component with four legs and a central top, no text or symbols present.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

ASSEMBLY PRECAUTIONS

1. Assemble needs to follow these instructions. Incorrect assembly can be a hazard.
2. Wear safety goggles and heavy-duty work gloves during assembly.
3. Do not assemble when tired or when under the influence of alcohol, drug medication.
4. Weight and other product properties are only applicable to correctly and completely assembled products.
5. Keep the assembly area clean and well-lit.

USE PRECAUTIONS

WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROI TIPPING:

1. This product is not a toy. Please keep the product away from children w assembling.
2. Use as intended only. Do not let children play or jump on the product. I stand on the item or use it as a step ladder.
3. Inspect before every use. Do not use it if parts are loose or damaged.
4. Tighten the lower screws every three months to prevent loosening of the
5. Do not exceed the listed weight capacity. Tighten all knobs securely before applying load. Be aware of dynamic loading! The sudden load movement may briefly create an excess load, causing product failure.

SAVE THESE INSTRUCTION

PART LIST

When unpacking this product, check to make sure the parts listed be are included and carefully inspect for any damage that may have occurred during transit. If any part is missing or damaged, do not attempt to assemble or use the product.

PART LIST ① ③ ④ ⑤ ⑦ 1 A spare x1 X6 B spare x2 X4 C spare x1 X1 D X6 E X6 F X1

PRODUCT PAREMETERS

Model	TE23K1001
Radius	12”
Height	17”
Rated Load	300lbs
Material	Teak

CLEANING AND MAINTENANCE

• You can use a soft cloth to clean the dust. If there are stains on the you can wipe it gently with a clean damp cloth, or use a professional cleaner to clean it.
• Do not store in direct sunlight. Store in a cool, dry place.
• Do not submerge in water. Please clean the stool with a soft cloth.

• Please dry the surface after each use and place it in a ventilated envirc

• Please avoid direct sunlight to the product surface for a long time.

• Regularly use teak oil for maintenance to maintain the gloss of the surface and extend its life.
• Do not store in extreme temperature environments. Too high or too low temperature can cause problems such as deformation and cracking. Place in an environment with a suitable temperature.
  • Periodically (every 90 days), make sure the screws are fully tightened.

INSTALLATION AND OPERATION INSTRUCTIONS

1. Installation Procedures

STEP1

⑦ ② C

STEP2

Diagram showing five sequential steps of a mechanical or electrical device with labeled components A and numbered positions 3 to 5.

STEP3

Technical diagram of a mechanical device with numbered components and an inset showing labeled parts A, D, E.

STEP4

Technical diagram of a mechanical device with labeled components and alignment indicators

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Imported to AUS:SIHAO PTY LTD.1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250,9166 Anaheim Place, Rancho Cucamonga, CA91730

UK

REP

Pooledas Group Ltd

Unit 5 Albert Edward House,

The Pavilions Preston, United Kingdom

[e-mail]

01772418127

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021,76351

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a symmetrical mechanical or architectural component with radial supports and a conical top (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

PARAMÈTRES DU PRODUIT

Diagram showing five sequential steps of a mechanical or electrical setup with labeled components A and directional arrows indicating movement.

ÉTAPE 3

Technical diagram of a mechanical device with numbered components and an inset view labeled A-E showing internal components.

ÉTAPE 4

Technical diagram of a mechanical device with labeled components and dashed lines indicating alignment or positioning.

Fabricant : Shanghaimuxinmuyeyouxiangongsi Adresse :

Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Importé en AUS :

SIHAO PTY LTD.1 ROKEVA STREETEASTWOOD NSW 2122 Australie

Line drawing of a dual-tiered table with a conical top and curved legs, no text or symbols present.

BRAUCHEN SIE HILFE? KONTAKTIERE UNS!

Diagram showing five sequential steps of a mechanical or electrical setup with labeled components A and numbered circles 3 to 5.

SCHRITT 3

Technical diagram of a mechanical device with numbered components and an inset view labeled A-E showing internal components.

SCHRITT 4

Technical diagram of a mechanical device with labeled components and dashed lines indicating alignment or positioning.

Hersteller: Shanghaimuxinmuyeyouxiangongsi Adresse:

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a symmetrical mechanical or architectural component with radial supports and a conical top (no text or symbols)

HO BISOGNO DI AIUTO? CONTATTACI!

Diagram showing five sequential steps of a mechanical or electrical setup with labeled components A and directional arrows indicating movement.

PASSO3

Technical diagram of a mechanical device with numbered components and an inset view labeled A-E showing internal components.

PASSO4

Technical diagram of a mechanical device with labeled components and dashed lines indicating alignment or positioning.

Importato in AUS:SIHAO PTY LTD.1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli Stati Uniti: Sanven Technology Ltd. Suite 250,9166 Anaheim Place, Rancho Cucamonga, CA91730

REP. DEL

REGNO UNITO

Gruppo Pooledas Ltd

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a symmetrical mechanical or architectural component with four legs and a central vertical beam (no text or symbols)

Diagram showing five sequential steps of a mechanical or electrical setup with labeled components A and numbered circles 3 to 5.

PASO 3

Technical diagram of a mechanical device with numbered components and an inset view labeled A-E showing internal components.

ETAPA 4

Technical diagram of a mechanical device with labeled components and dashed lines indicating alignment or positioning.

Fabricante: Shanghaimuxinmuyeyouxiangongsi

Line drawing of a symmetrical mechanical or architectural component with radial supports and a conical top (no text or symbols)

POTRZEBUJE POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Diagram showing five sequential steps of a mechanical or electrical setup with labeled components A and directional arrows indicating movement.

KROK 3

Technical diagram of a mechanical device with numbered components and an inset view labeled A-E showing internal components.

KROK 4

Technical diagram of a mechanical device with labeled components and dashed lines indicating alignment or positioning.

Producent: Shanghaimuxinmuyeyouxiangongsi Adres:

Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Szanghaj Import do AUS:SIHAO

PTY LTD.1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd. Suite 250,9166 Anaheim Place, Rancho Cucamonga, CA91730

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

HOEK DOUCHEBANK

MODEL:TE23K1001

Line drawing of a symmetrical mechanical or architectural component with radial supports and a conical top (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Diagram showing five sequential steps of a mechanical or electrical setup with labeled components A and directional arrows indicating motion.

STAP 3

Technical diagram of a mechanical device with numbered components and an inset view labeled A-E showing internal components.

STAP 4

Technical diagram of a mechanical device with labeled components and dashed lines indicating alignment or positioning.

Fabrikant: Shanghaimuxinmuyeyouxiangongsi Adres:

Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a symmetrical mechanical or architectural component with radial supports and a conical top (no text or symbols)

BEHÖVS HJÄLP? KONTAKTA OSS!

Diagram showing five sequential steps of a mechanical or electrical setup with labeled components A and numbered circles 3 to 5.

STEG 3

Technical diagram of a mechanical device with numbered components and an inset view labeled A-E showing internal components.

STEG 4

Technical diagram of a mechanical device with labeled components and dashed lines indicating alignment or positioning.

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Importerad till AUS:SIHAO PTY LTD.1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importerad till USA:Sanven Technology Ltd. Suite 250,9166 Anaheim Place, Rancho Cucamonga, CA91730

UK

REP

Pooledas Group Ltd

Enhet 5 Albert Edward House,

The Pavilions Preston, Storbritannien

[e-mail]

01772418127

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021,76351

Linkenheim-Hochstetten, Tyskland

[e-mail] +49

1727041930

Tillverkad i Kina

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support