TE23K1002 - Shower bench Vevor - Free user manual and instructions

Product Type	Corner Shower Bench
Brand	Vevor
Model	TE23K1002
Main Material	Teak
Radius	39.4 cm (15.5")
Height	47 cm (18.5")
Maximum Load Capacity	227 kg (500 lb)
Intended Use	Fixed Shower Seat
Assembly Required	Yes
Recommended Cleaning	Soft cloth, professional furniture cleaner
Wood Care	Regular application of teak oil
Usage Precautions	Do not use if parts are loose; do not exceed load capacity
Periodic Check	Every 90 days, tighten foot screws
Storage	In a cool, dry place, away from direct sunlight
Origin	Made in China
Technical Support	www.vevor.com/support
Warranty	Electronic warranty certificate available online
Included Accessories	Mounting hardware

Frequently Asked Questions - TE23K1002 Vevor

How to assemble the shower bench?

Follow the step-by-step instructions provided in the manual. Wear safety glasses and sturdy work gloves during assembly. Do not assemble if you are tired or under the influence of substances.

What is the maximum weight capacity of the bench?

The rated load capacity is 500 lbs (227 kg). Do not exceed this limit. Be aware of dynamic loading, as sudden movement may create excessive load.

How to clean and maintain the teak bench?

Use a soft cloth to remove dust. For stains, gently wipe with a clean, damp cloth or professional furniture cleaner. Apply teak oil regularly to maintain shine and extend lifespan.

How often should I tighten the screws?

It is recommended to tighten the lower screws every three months to prevent feet loosening and ensure bench stability.

Can I use this bench in an outdoor shower?

Yes, but avoid prolonged exposure to direct sunlight. Store it in a cool, dry place after use. Do not immerse in water and dry the surface after each use.

Is the bench delivered assembled?

No, the bench requires assembly according to the provided instructions. Check that all listed parts are present before starting.

What to do if a part is missing or damaged?

Contact customer service at www.vevor.com/support. Do not attempt to assemble or use the product if a part is missing or damaged.

How to maintain teak to preserve its appearance?

Apply teak oil regularly to nourish the wood and preserve its luster. Avoid extreme temperatures and prolonged direct sunlight.

Can I use this bench as a step stool or for standing?

No, the bench is designed only for sitting. Do not stand on it or use it as a step stool, as this could cause serious injury.

Where is this product made and who is the importer?

The bench is made in China. Imported into the United States by Sanven Technology Ltd. (Suite 250, 9166 Anaheim Place, Pavilions Preston, United Kingdom). CE representative: SHUNSHUN GmbH (Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany).

USER MANUAL TE23K1002 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

CORNER SHOWER BENCH

MODEL: TE23K1002

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us whether you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

CORNER SHOWER BENCH

MODEL: TE23K1002

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

ASSEMBLY PRECAUTIONS

1. Assembly needs to follow these instructions. Incorrect assembly can be a hazard.
2. Wear safety goggles and heavy-duty work gloves during assembly.
3. Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
4. Weight and other product properties are only applicable to correctly and completely assembled products.
5. Keep the assembly area clean and well-lit.

USE PRECAUTIONS

WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy. Please keep the product away from children while assembling.
2. Use as intended only. Do not let children play or jump on the product. Do not stand on the item or use it as a step ladder.
3. Inspect before every use. Do not use it if parts are loose or damaged.
4. Tighten the lower screws every three months to prevent loosening of the
5. Do not exceed the listed weight capacity. Tighten all knobs securely before applying load. Be aware of dynamic loading! The sudden load movement may briefly create an excess load, causing product failure.

SAVE THESE INSTRUCTIONS

PART LIST

When unpacking this product, check to make sure the parts listed below are included and carefully inspect for any damage that may have occurred during transit. If any part is missing or damaged, do not attempt to assemble or use the product.

PRODUCT PARAMETERS

Model	TE23K1002
Radius	15.5”
Height	18.5”
Rated Load	500lbs
Material	Teak

CLEANING AND MAINTENANCE

• You can use a soft cloth to clean the dust. If there are stains on the surface, you can wipe it gently with a clean damp cloth, or use a professional cleaner to clean it.
• Do not store in direct sunlight. Store in a cool, dry place.
• Do not submerge in water. Please clean the stool with a soft cloth.
• Please dry the surface after each use and place it in a ventilated environment.
• Please avoid direct sunlight to the product surface for a long time.
• Regularly use teak oil for maintenance to maintain the gloss of the surface and extend its life.
• Do not store in extreme temperature environments. Too high or too low temperature can cause problems such as deformation and cracking. Place in an environment with a suitable temperature.
• Periodically (every 90 days), make sure the screws are fully tightened.

INSTALLATION AND OPERATION INSTRUCTIONS

1. Installation Procedures

STEP1

STEP2

STEP3

STEP 4

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, Building 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Pooledas Group Ltd

UK

REP

Unit 5 Albert Edward House,

The Pavilions Preston, United Kingdom

[e-mail]

01772418127

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021, 76351

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

PRODUCT PARAMETERS

STEP 2

STEP 3

STEP 4

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported in AUS:

SIHAO PTY

Rancho Cucamonga, CA91730

REPRÉSENTANT

DU ROYAUME-UNI

Pooledas Group Ltd

Unit 5 Albert Edward House, The

NEED HELP? CONTACT US!

STEP 2

STEP 3

STEP 4

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Rancho Cucamonga, CA91730

UK

REP

Pooledas Group Ltd Unit

5 Albert Edward House, The

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

STEP 3

STEP 4

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported into the US: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA91730

REP. DEL

REGNO UNITO

Pooledas Group Ltd

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

STEP 3

STAGE 4

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Place, Rancho Cucamonga, CA91730

House, The Pavilions Preston, Reino

NEED HELP? CONTACT US!

STEP 2

STEP 3

STEP 4

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Import to

AUS:SIHAO PTY LTD.1 ROKEVA STREETEASTWOOD

Place, Rancho Cucamonga, CA91730

Pooledas Group Ltd

Unit 5 Albert Edward House,

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

CORNER SHOWER BENCH

MODEL: TE23K1002

NEED HELP? CONTACT US!

STEP 3

STEP 4

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported in AUS:

Place, Rancho Cucamonga, CA91730

Pooledas Group Ltd

Unit 5 Albert Edward House, The

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

STEP 3

STEP 4

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA91730

Pooledas Group Ltd

UK

REP

Unit 5 Albert Edward House,

The Pavilions Preston, United Kingdom

[e-mail]

01772418127

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021, 76351

Linkenheim-Hochstetten, Germany

[e-mail]

[phone]

Made in China

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support