TK-10T - Pulley winches Vevor - Free user manual and instructions

Product Type	Manual Pulley Hoists
Brand	Vevor
Model	TK-10T
Maximum Load Capacity (lb)	11,000 lb (approx. 5 tons)
Breaking Capacity (lb)	22,000 lb
Cable Type	Steel cable or synthetic rope
Recommended Cable Diameter	10-14 mm
Material	High strength steel
Intended Use	Lifting and pulling heavy loads
Maintenance	Grease regularly before use
Cleaning	Wipe with a dry cloth; avoid water
Safety Instructions	Do not overload; check for deformation before use; keep out of reach of children
Spare parts	Not specified; contact technical support
Warranty	Electronic warranty via www.vevor.com/support
Technical support	www.vevor.com/support
Approximate dimensions	Approximately 30 x 15 x 10 cm (estimate)
Approximate weight	Approximately 8-10 kg (estimate)

Frequently Asked Questions - TK-10T Vevor

What is the maximum capacity of the TK-10T hoist?

The maximum load capacity is 11,000 lb (approx. 5 tons). Never exceed this limit.

What type of cable should be used with the TK-10T?

Use a steel cable or synthetic rope with a diameter of 10 to 14 mm.

How to maintain the TK-10T hoist?

Before each use, add grease to the pulley to ensure smooth operation. Clean with a dry cloth.

Can I use the TK-10T to lift people?

No, this product is designed only for lifting loads. Never use it to lift people.

What to do if the hoist is deformed?

Check for deformation before use. If you notice deformation, immediately replace the product with a new one.

Is the TK-10T suitable for outdoor use?

Yes, but avoid prolonged exposure to rain or moisture. Store it in a dry place after use.

What is the breaking strength of the TK-10T?

The breaking load is 22,000 lb, twice the maximum working load.

How to get the user manual?

You can download the PDF manual for free at notice-facile.com on the product page.

Are spare parts available?

Spare parts are not listed in the manual. Contact technical support at www.vevor.com/support for assistance.

What is the warranty of the TK-10T?

Electronic warranty can be obtained at www.vevor.com/support. Keep the proof of purchase.

USER MANUAL TK-10T Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

PULLEY HOISTS USER MANUAL

MODEL: TK-10T & TK-15T & TK-13.5T

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared to the brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

MODEL: TK-10T / TK-15T / TK-13.5T

Note: The actual product you receive determines its look.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

SAFETY INSTRUCTION AND PRECAUTIONS

WARNING:

Read this material before using this product. Failure to do so may result in serious injury.

1. This product is not a toy. Do not allow children to play with this.
2. Use as intended only.
3. Do not overload; ensure use within its bearing capacity.
4. Follow manufacturer instructions and safety recommendations, especially in special environments.
5. Note: Model: TK-10T & TK-15T. Please check if it's deformed before use; if so, remember to replace it with new ones.
6. Note: Model: TK-10T & TK-15T. Add grease before use, so that the pulley can be used better.

DIRECTIONS FOR USE

Application example

Items	Model	TK-10T	TK-15T	TK-13.5T
1	Working Load Limit(lbs)	11000	33000	16000
2	Breaking Load(lbs)	22000	66000	32000
3	Rope type	steel cable or synthetic rope
4	Rope Size	10-14mm		≤3/8inch

Manufacturer: Shanghai Xinmu Ye You Xiangong Si

Address: Shuangcheng Lu 803 Nong 11 Hao 1602A-1609 Shi, Baoshan Qu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr. 69, 60329 Frankfurt am Main

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

USER MANUAL FOR CABLE PULLER

MODEL: TK-10T & TK-15T & TK-13.5T

Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

electronics www.vevor.com/support

USER MANUAL FOR PULLEY BLOCKS

MODEL: TK-10T, TK-15T, and TK-13.5T

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

CONSULTING YH LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, Via Roma, 101, 00186 Rome, Italy

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and warranty certificate

electronics www.vevor.com/support

USER MANUAL FOR PULLEY HOISTS

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX