SYD01 - Table and chair Vevor - Free user manual and instructions

Product Type	Weaning table and chair
Brand	Vevor
Model	SYD01
Table dimensions (L x W x H)	424 x 300 x 385 mm
Chair dimensions (L x W x H)	324 x 285 x 345 mm
Maximum load capacity of table	60 kg
Maximum load capacity of chair	40 kg
Recommended age	3 years and older
Seat height adjustment	3 positions
Assembly	Required by an adult
Main material	Wood and steel
Hardware	Screws, nuts and dowels included
Certification	CE
Use	Indoor, flat surface
Safety	Safety instructions included
Maintenance	Clean with a damp cloth and mild detergent
Warranty and support	Technical support via www.vevor.com/support
Manufacturer	Shanghaimuxinmuyeyouxiangongsi, Shanghai, China
EU representative	E-CrossStu GmbH, Frankfurt
UK representative	YH CONSULTING LIMITED

Frequently Asked Questions - SYD01 Vevor

How to assemble the SYD01 table and chairs?

Follow the step-by-step instructions in the manual. Use the provided dowels (type b), nuts (type c) and screws (type a). It is recommended to wear safety goggles and gloves. Assemble on a flat, clean surface.

What is the recommended age for this product?

This product is designed for children aged 3 years and older. Not suitable for children under 3 years due to small parts.

What is the load capacity of the table and chair?

The table supports a maximum load of 60 kg and the chair a maximum load of 40 kg. Do not exceed these limits.

How to clean the table and chair set?

Clean with a damp cloth and mild detergent. Avoid harsh solvents. Dry thoroughly after cleaning.

Where can I find spare parts?

Contact Vevor customer service via www.vevor.com/support. You can also refer to the EU or UK representative mentioned in the manual.

Is the seat height adjustable?

Yes, the seat plate can be adjusted to three different positions to accommodate the child's growth.

What are the exact product dimensions?

Table: 424 x 300 x 385 mm; Chair: 324 x 285 x 345 mm. Make sure you have enough space for installation.

Is this product certified?

Yes, the product is CE certified, compliant with European safety standards.

What to do if a part is missing or damaged?

Check the parts list in the manual. If a part is missing or damaged, contact Vevor support immediately via www.vevor.com/support for a replacement.

How to contact Vevor customer service?

Visit www.vevor.com/support for technical assistance and warranty inquiries. You can also contact the EU representative (E-CrossStu GmbH) or UK representative (YH CONSULTING LIMITED) indicated in the manual.

USER MANUAL SYD01 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

Adult assembly

WEANING TABLE AND CHAIR SET

USER MANUAL

MODEL:SYD01

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

WEANING TABLE AND

CHAIR SET

MODEL:SYD01

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

	Warning-To reduce the risk of injury, user must read instructions manual carefully.Note: Adult assembly required !
CE	Compliance is a CE security certification.
Ages	3 Years +

SAFETY INSTRUCTIONS

WARNING:

Read this material before using this product. Failure to do so may result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly may create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard, and smooth surface capable of safely supporting the WEANING TABLE AND CHAIR SET.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

Use precautions

1. Do not exceed weight capacities.
2. Use only on a flat, level, hard and smooth surface capable of supporting the fully loaded WEANING TABLE AND CHAIR SET.
3. Use as intended only.
4. Inspect before every use; do not use if parts are loose or damaged.

SAVE THESE INSTRUCTIONS

PARTS LIST

a		16PCS		c		8PCS
b		16PCS		d		1PC

INSTRUCTIONS (TABLE)

STEP 1: Dowel mounting

STEP 2

STEP 3: Mounting nut

STEP 4: Mounting screw

INSTRUCTIONS (CHAIR)

STEP 5: Dowel mounting

STEP 6

STEP 7: Mounting nut

STEP 8: Mounting screw

The seat plate can be adjusted in three gears.

Installation complete

PRODUCT PARAMETER

Model	SYD01
Safe Loading Weight	The table: 60kgThe chair: 40kg
Product Size	The table: 424*300*385mmThe chair: 324*285*345mm

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, China.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

INSTRUCTIONS (CHAIR)

PRODUCT PARAMETERS

A/S YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

WARNING

PRODUCT PARAMETERS

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

electronics www.vevor.com/support

WARNING

STEP 2

PRODUCT PARAMETER

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD

New South Wales 2122 Australia

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey,

Model TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

PRODUCT PARAMETER

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

PRODUCT PARAMETER

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

WARNING

Adult assembly

FEEDING TABLE AND CHAIR SET

USER MANUAL

MODEL: SYD01

NEED HELP? CONTACT US!

STEP 3 Mounting nut

STEP 4 Mounting screw

STEP 7 Mounting nut

STEP 8 Mounting screw

PRODUCT PARAMETERS

	SYD01Model
Veilig laadgewicht	De tafel: 60kgDe stoel: 40kg
Productgrootte	De tafel: 424*300*385mmDe stoel: 324*285*345mm

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000 CN.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

WARNING

Adult collection

WEANING TABLE AND CHAIR SET

USER MANUAL

MODEL: SYD01

NEED HELP? CONTACT US!

STEP 3 Mounting nut

STEP 4 Mounting screw

INSTRUCTIONS (CHAIR)

STEP 7 Mounting nut

STEG 8 Mounting screw

PRODUCT PARAMETERS

	SYD01Modell
Säker lastvikt	Bordet: 60 kgStolen: 40 kg
Produktstorlek	Bordet: 424*300*385mmStolen: 324*285*345mm

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

UK

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support