KDLRB50-158-31 - Acoustic insulation panels Vevor - Free user manual and instructions

Product Type	Acoustic Insulation Panels
Brand	Vevor
Model	KDLRB50-158-31
Material	Fiberglass
Dimensions (L×W)	600 × 300 mm
Thickness	50 mm ± 2 mm
Quantity per Lot	4 pieces
Color	Black
Back Adhesive	Yes, disposable sticker
Installation Method	Wall bonding, pressure fixation
Installation Precautions	Wear safety glasses and gloves; assemble with two people; clean and well-lit work area
Required Wall Conditions	Clean, smooth, flat and dry wall
Maintenance and Cleaning	Dust with a dry cloth or soft brush
Spare Parts	Not available separately (complete lot)
Repairability	Not repairable, replace damaged panel
Warranty	Technical support and electronic warranty certificate at www.vevor.com/support
Safety Standards	ANSI approved safety glasses recommended

Frequently Asked Questions - KDLRB50-158-31 Vevor

How to install Vevor acoustic panels?

Before installation, make sure the wall is clean, smooth, flat and dry. Mark the desired location, remove the protective paper from the back adhesive, then press the panel firmly against the wall. It is recommended to do it with two people.

What are the dimensions of the KDLRB50-158-31 panel?

Each panel measures 600 mm long by 300 mm wide, with a thickness of 50 mm ± 2 mm.

What color are the panels of this model?

The model KDLRB50-158-31 is black. Other variants exist in gray, beige and camel.

Can the panel be removed and repositioned after gluing?

No, the back adhesive is disposable. Once glued, it loses its adhesion if removed. Mark the position well before gluing.

What tools are needed for installation?

The required tools are: a tape measure, a right angle ruler, a pencil, and possibly a spirit level for perfect alignment.

How to clean the acoustic panels?

Use a dry cloth or soft brush to remove dust. Avoid liquid or abrasive products that could damage the surface.

Are the panels fireproof?

The manual does not mention a fire rating. If in doubt, contact Vevor support.

Where to find the serial number or warranty?

The electronic warranty certificate and technical support are available at www.vevor.com/support. Keep the proof of purchase.

Can I install these panels in a bathroom?

Not recommended if humidity is high. The manual recommends treating excessive humidity before installation or choosing a dry environment.

How many panels are delivered?

The lot contains 4 panels of dimensions 600x300 mm, covering approximately 0.72 m².

USER MANUAL KDLRB50-158-31 Vevor

FIBERGLASS SOUNDPROOF PANELS

MODEL: KDLRB50-158-31 / KDLRB50-158-26 / KDLRB50-158-33 / KDLRB50-158-2

Technical Support and E-Warranty Certificate

www.vevor.com/support

Model: KDLRB50-158-31 / KDLRB50-158-26 / KDLRB50-158-33 / KDLRB50-158-2

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING:

Read this material before using this product. Failure to do so can result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
6. Product capabilities apply to properly and completely assembled product only.
7. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
8. For safety reasons, this hardware is recommended to be installed by people
9. Products are installed away from children and pets;

SAVE THESE INSTRUCTIONS

PARAMETER LIST

Model	KDLRB50-158-31	KDLRB50-158-26	KDLRB50-158-33	KDLRB50-158-2
Size	L×W:600×300mm
Thickness	50mm±2mm
QTY	4pcs
Color	black	gray	Beige	Camel
Back glue	Yes

Install the required tools

Band Tape

Right angle ruler

Pencil

The Standard Installation Method

Notes noted before use:

Make sure the wall is clean, smooth, and flat before installing the pane. If the wall humidity is too high, it is recommended to treat it in advance to replace the dry environment before installation.

The product back adhesive viscosity is high, it is recommended to make position and then paste;

The product back glue is disposable, paste the wall and then remove product back glue will lose stickiness.

1. On the pasted wall, mark the required location and size.

1. Tear off the backing paper; Attach the soundboard to the marked wall.

1. Gently press the sound insulation board, let it firmly paste on wall;

4. Finish.

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

FIBERGLASS SOUND INSULATION PANELS

MODEL: KDLRB50-158-31/KDLRB50-158-26

KDLRB50-158-33/KDLRB50-158-2

1. Finish.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

YH CONSULTING LIMITED. C/O YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

Affordable. Reliable. Home Improvement.

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

4. Done.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported into the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

FIBERGLASS SOUNDPROOFING PANELS

MODEL: KDLRB50-158-31/KDLRB50-158-26

Model KDLRB50-158-33/KDLRB50-158-2

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

4. Finish.

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

Affordable. Reliable. Home Improvement.

GLASS FIBER SOUNDPROOFING PANELS

MODEL: KDLRB50-158-31/KDLRB50-158-26 KDLRB50-158-33/KDLRB50-158-2

1. Finish.

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

Affordable. Reliable. Home Improvement.

GLASS FIBER SOUNDPROOFING PANELS

MODEL: KDLRB50-158-31/KDLRB50-158-26

KDLRB50-158-33/KDLRB50-158-2

1. Finish.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP WIELKIEJ BRYTANII

YH CONSULTING LIMITED. C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Przedstawiciel UE

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

Affordable. Reliable. Home Improvement.

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Fiberglass soundproofing

panels

Model: KDLRB50-158-31/KDLRB50-158-26/KDLRB50-158-33/KDLRB50-158-24.

Finishing.

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd. Address:

Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

FIBERGLASS SOUNDPROOFING PANEL

MODEL: KDLRB50-158-31/KDLRB50-158-26

KDLRB50-158-33/KDLRB50-158-2

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Fiberglass soundproofing panels

Model: KDLRB50-158-31/KDLRB50-158-26/KDLRB50-158-33/KDLRB50-158-2

4. Finish.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

www.vevor.com/support