JNP02002 - Home Decor Vevor - Free user manual and instructions

Product type	Artificial green wall
Brand	Vevor
Model	JNP02002
Dimensions after splicing	20 x 20 inches (50.8 x 50.8 cm)
Weight	6.4 kg
Material	Plastic and fabric (artificial foliage)
Number of panels	1 panel
Color	Green (varied foliage)
Intended use	Indoor wall decoration
Assembly	No tools required for snap-lock
Installation method	Zip ties, staples, anchor screws or self-tapping screws depending on the surface
Connection system	Easy snap-lock between panels
Maintenance	Dust regularly with a soft cloth or duster
Cleaning	Avoid water; use an antistatic product for artificial plants
Safety	Do not sit or stand on it; do not use as a toy; keep out of reach of children
Package contents	1 artificial green wall panel
Warranty	Electronic warranty via www.vevor.com/support

Frequently Asked Questions - JNP02002 Vevor

How to install the panel on drywall?

Use staples and a Crown 20 stapler of 1/2 in x 1/2 in (not included). Attach the panel at the top of the wall, place 2 staples on the edges of each panel, then repeat going down.

How to install on concrete or brick?

Use round head concrete anchor screws of 3/16 in x 1 3/4 in. Drill holes in the wall at the locations of the panel's square holes, then screw in the anchors.

Can the panels be cut to the desired size?

It is not recommended to cut the panels as this may damage the structure and foliage. For specific dimensions, choose the appropriate model or assemble multiple panels.

How to clean the artificial green wall?

Dust regularly with a soft cloth or duster. Avoid water. For deeper cleaning, use a special antistatic product for artificial plants.

Is the green wall fireproof?

The product is made of plastic and fabric; it is not fireproof. Keep it away from heat sources and open flames.

Can this product be used outdoors?

This model is designed for indoor use. Outdoors, protect it from weather and UV to prevent discoloration and deterioration.

How many panels are needed to cover a large area?

Each panel measures 20 x 20 inches (50.8 x 50.8 cm). Calculate the area to cover and connect the panels using the snap-lock system. Buy the corresponding number of panels.

What tools are provided with the product?

No tools are included. The panel assembles without tools, but installation on different surfaces may require zip ties, staples, or screws not provided.

Can the panels be repositioned after installation?

The panels can be easily disassembled thanks to the snap-lock system. However, wall fasteners (staples or screws) may leave marks. Proceed with caution.

How to contact Vevor technical support?

Go to www.vevor.com/support for technical assistance and to obtain the electronic warranty certificate.

USER MANUAL JNP02002 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

ARTIFICIAL PLANT WALL

MODEL: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

We continue to be committed to providing you with tools at competitive prices. "Save Half," "Half Price," or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when placing an order with us if you are actually saving half in comparison with the top major brands.

Model: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

1. Technical Parameters

Model	Product size after splicing(inch)	Product Weight(kg)
JNP02001	20*20	8.8
JNP02101	15*15	1.74
JNP02201	40*120	6.8
JNP02202	60*120	10.4
JNP02102	15*15	3.6
JNP02002	20*20	6.4

2. Safety Precautions

WARNING:

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL

Assembly Precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or under the influence of alcohol, drugs, or medication.
6. Product capabilities apply to correctly and completely assembled products only.

Use Precautions

1. Do not sit or stand on this item.
2. This product is not a toy. Therefore, do not allow children to play with this item.
3. Use as intended only.

©

Drywall and Wood

Tools: 1/2 in. * 1/2 in. Crown 20 Gauge Staples & Stapler (Not Included)

1. Fasten the first panel or connected panels directly to the
2. top of the wall or surface. Use additional staples on the
3. top panel in each column hung.
4. Place 2 Staples on the edges of each panel, making your
5. way down to the bottom panel.
6. Repeat progressing laterally (clip panel sections together
7. before fastening to the support for a perfect fit.)

Concrete, Brick or Block

Tools: 3/16 in. x 1-3/4 in. Washer Head Concrete Screw Anchors, Drill & Drill Bit (Not Included)

1. Hold a single panel in place at the top of the wall or surface. Using your drill and drill bit, drill one hole in the top left & suitable holes found on the backing grid of the panel. Drill each hole approximately 1/4 inch deeper than the anchor screw being used.
2. Screw a washer head concrete anchor in each hole, securing the panel to the surface.
3. Repeat processing downward until a single column is complete, ensuring the panels are securely fastened as you progress. 4. Repeat steps 1 until your installation is complete.

Metal/Aluminum

Tools: 3/4 in. Truss Head Self-Tapping Screws & Drill (Not Included)

1. Hold a single panel in place at the top of the wall or surface. Using drill and 3/4 in self-tapping screws, place a screw in the top left & square holes found on the backing grid of the panel.
2. Repeat processing downward until a single column is complete, ensuring the panels are securely fastened as you progress.
3. Repeat steps 1 & 2 until your installation is complete.

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, China.

Imported to Australia: SIHAO PTY LTD. 1 Rokeva Street, Eastwood NSW 2122, Australia.

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730.

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX.

EC

REP

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: JNP02001/JNP02101/JNP02201/

JNP02202/JNP02102/JNP02002

Model: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP0202

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

NEED HELP? CONTACT US!

& Drill (not included)

Metal/Aluminum

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122

Consulting Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

MODEL: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

Model: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

Drywall and wood

Metal/Aluminium

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: JNP02001/JNP02101/JNP02201/

Model: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

Model JNP02001/JNP02002 Model JNP02101/JNP02102 Model JNP02201/JNP02202

Drywall and wood

Tools: 1/2 inch * 1/2 inch Crown 20 Gouge Staples and stapler (not included)

Metal/Aluminum

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122

Consulting Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

Model: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

©

Metal/Aluminum

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRESENTANTE CE

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: JNP02001/JNP02101/JNP02201/

JNP02202/JNP02102/JNP02002

Model: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

NEED HELP? CONTACT US!

Metal/Aluminium

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA:

Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED. C/O YH Consulting

REP WIEL KIEJ BRYTANII

Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Przedstaw ciel UE

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

Model: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

NEED HELP? CONTACT US!

Drywall and wood

Tool: 1/2in.*1/2in. Crown 20 Gauge Staples & Stapler (not included)

Concrete, brick, or block

Metal/Aluminum

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd. Address:

Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, CN.

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

Model: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

NEED HELP? CONTACT US!

Chain link, wire mesh & wrought iron

Gypsum and wood

Concrete, brick, or block

Metal/aluminum

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122

Consulting Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support