JNP02001 - Home Decor Vevor - Free user manual and instructions

Product Type	Artificial Green Wall
Brand	Vevor
Model	JNP02001
Dimensions (after splicing)	20 x 20 inches (50.8 x 50.8 cm)
Weight	8.8 kg
Material	Artificial plastic foliage with support grid
Intended Use	Indoor wall decoration
Installation	On wood, concrete, metal, mesh with cable ties, staples or screws (not included)
Safety Precautions	Not to be used as a toy, do not sit or stand on it, wear safety glasses and gloves during installation
Maintenance	Dust with a soft cloth or feather duster. Avoid excessive water
Package Contents	Artificial green wall panels (quantity varies by model)
Assembly	No tools required, snap-lock system
Required accessories (not included)	Cable ties, staples, screws depending on the support
Warranty	Electronic warranty certificate at www.vevor.com/support
Manufacturer	Shanghaiuxinmuyeyouxiangongsi, Baoshan District, Shanghai, China
Importer	USA: Sanven Technology Ltd.; Australia: SIHAO PTY LTD.; EU: YH CONSULTING LIMITED

Frequently Asked Questions - JNP02001 Vevor

How to assemble the green wall panels?

First, arrange the flowers and leaves in the correct direction (boxwood and feminine plants are multidirectional, ivy and lavender follow the direction of the foliage). Then, connect the panels using the easy snap-lock system. For fast installation, start with strips 2 panels wide.

What tools are needed for installation?

It depends on the support: for mesh, use green cable ties (not included); for drywall and wood, use staples and a 1/2 x 1/2 inch Crown 20 stapler; for concrete, brick or block, use 3/16 x 1 3/4 inch round head concrete anchor screws and a drill; for metal/aluminum, use 3/4 inch pan head self-tapping screws and a drill.

Can I install this green wall outdoors?

The product is designed for indoor decoration. Outdoor installation is not recommended as the materials could degrade from weather and UV exposure.

How to clean the artificial leaves?

Dust regularly with a soft cloth or feather duster. For deeper cleaning, you can use a slightly damp cloth, but avoid excessive water which could damage the panels.

Is the product fire resistant?

The instructions do not mention fire retardant treatment. As a safety measure, keep away from any heat source or open flame.

Can I cut the panels to the desired size?

The panels are designed to be assembled without cutting. If you must adjust them, use a utility knife or heavy-duty scissors, but this may damage the structure. It is better to buy the appropriate size.

Can the green wall support the weight of other objects?

No, the product is not designed to support additional weight. Do not sit or stand on it, and do not hang heavy objects on it.

How to attach the green wall to concrete?

Hold a panel in place, drill a hole at the top left and one at the top right through the grid, then insert round head concrete anchors. Screw them in to secure the panel. Repeat for each panel moving down and sideways.

What to do if a panel is damaged?

Contact customer service via www.vevor.com/support for replacement parts or advice. Do not use a damaged panel as it may not be safe.

Where to find warranty and technical support?

The electronic warranty certificate and technical support are available at www.vevor.com/support. Keep the proof of purchase for any claims.

USER MANUAL JNP02001 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

ARTIFICIAL PLANT WALL

MODEL:JNP02001/JNP02101/JNP02201/ JNP02202/JNP02102/JNP02002

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Artificial Plant Wall

Model:JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

1. Technical Parameters

Model	Product size after splicing(inch)	Product Weight(kg)
JNP02001	20*20	8.8
JNP02101	15*15	1.74
JNP02201	40*120	6.8
JNP02202	60*120	10.4
JNP02102	15*15	3.6
JNP02002	20*20	6.4

2. Safety Precautions

WARNING:

Read this material before using this product. Failure to do so can reserious injury. SAVE THIS MANUAL

Assembly Precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
   5.Do not assemble when tired or under the influence of alcohol, drug medication.
   6.Product capabilities apply to correctly and completely assembled products only.

Use Precautions

1. Do not sit or stand on this item .
2. This product is not a toy. Therefore, do not allow children to play this item.
3. Use as intended only.

3. Instructions for Use

Assembly(No tools required)

After receiving the sample, arrange the flowers and leaves of the product first

1. Observe the direction of the foliage

-Boxwood & Fem : Multi-directional

-ivy &Lavender. Follow the direction of the foliage.

1. Connect panels using the easy snap-to-lock system.

2. For simple and quick installation, from strips 2 panels wide by the desired height.

Chain Link, Wire Mesh & Wrought Iron

Tools: Green zip ties(Not Included)

1 . Fasten the first panel or connected set or panels directly to the s

1. Repeat progressing laterally (clip panel sections together

before fastening to the support for a perfect fit.)

Drywall and Wood

Tools:1/2in.*1/2in. Crown 20 Gouge Staples & Stapler (Not Included)

1. Fasten the first panel or connected panels directly to the
2. top of the wall or service. Use additional staples on the
3. top panel in each column hung.
4. Place 2 Staples on the edges of each panel, making your
5. way down to the bottom panel.
6. Repeat progressing laterally (clip panel sections together
7. before fastening to the support for a perfect ft.)

Concrete, Brick or Block

Tools: 3/16 in.*13/4 in. Washer Head Concrete Screw Anchors, Drill & Drill (Not Included)

1. Hold a single panel in place at the top of the wall or surface. Using your drill and drill bit, drill one hole in the top left & suitable holes found on the backing grid of the panel. Drill each hole approxi 1/4 inch deeper than the anchor screw being used.
2. Screw a washer head concrete anchor in each hole, securing the to the surface.
3. Repeat processing downward til a single column is complete ensuring the panels are securely fastened as you progress. 4. Repeat steps 1 until your installation is complete.

Metal/Aluminum

Tools: 3/4 in. Truss Head Self-Tapping Screws & Drill (Not Included)
1. Hold a single panel in place at the top of the wall or surface. L drill and 3/4 in self-tapping screws, place a screw in the top left & square holes found on the backing grid of the panel.
2. Repeat processing downward til a single column is complete ensuri the panels are securely fastened as you progress.
3. Repeat steps 1 & 2 till your installation is complete.

Manufacturer: Shanghaiuxinmuyeyouxianggsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Assistance technique et certificat de garantie electronique www.vevor.com/support

MUR VÉGÉTAL ARTIFICIEL

MODELE: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

Modèle: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP0202

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

BESOIN D'AIDE? CONTACTEZ-NOUS!

& Perceuse (non incluse)

Consulting Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

MODELL: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

Model: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

Cucamonga, CA 91730 YH CONSULTING

LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

MODELLO:JNP02001/JNP02101/JNP02201/

Modello:JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

Modello JNP02001/JNP02002 Modello JNP02101/JNP02102 Modello JNP02201/JNP02202

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importato in

USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED. C/O YH

Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 FrancofortesulMeno.

VEVOR

TOUGH TOOLS, HALF PRICE

MODELO:JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

Modelo: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

NECESITA AYUDA? iCONTÁCTENOS!

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

Modele: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London Road, Stainesupon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR

TOUGH TOOLS, HALF PRICE

MODEL: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

Model:JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

HULP NODIG? NEEM CONTACT MET ONS OP!

Cucamonga, CA 91730 YH CONSULTING

LIMITED. C/O YH Consulting Limited Kantoor 147,

Centurion House, London Road, Staines-upon

Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELL:JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

Modell: JNP02001/JNP02101/JNP02201/JNP02202/JNP02102/JNP02002

JNP02001/JNP02002 JNP02101/JNP02102 JNP02201/JNP02202

BEHÖVER HJÄLP? KONTAKTA OSS!

Consulting Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support