JM-XC-088 - Pet cage Vevor - Free user manual and instructions

USER MANUAL JM-XC-088 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

HAMSTER CAGE

USER MANUAL

MODEL:JM-XC-088

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represents estimate of savings you might benefit from buying certain tools with us compared to the brands and does not necessarily mean to cover all categories of tools offered by us. Y kindly reminded to verify carefully when you are placing an order with us if you are actual half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

HAMSTER CAGE

MODEL:JM-XC-088

3D wireframe model of a cat's cage with two large propeller-like structures inside (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully be operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or soi updates on our product.

SAFETY INSTRUCTIONS

WARNING:

Read this material before using this product. Failure to do so ca result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly c create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Hamster Cage.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unw and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or item.
3. Do not exceed specified weight capacities.
4. Use only on a flat, level, hard, and smooth surface that can safe support a fully loaded Hamster Cage.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damage

SAVE THIS MANUAL

PARTS LIST

ASSEMBLY STEP

Step 1

Assemble B and C together as shown, with hooks crossing left and right.

3D wireframe diagram of a geometric object with labeled points B and C (no text or symbols beyond labels)

B C

Step 2

Place the 6 H on top of A according to the in the diagram.

A H

H

Close-up of mechanical components with labeled section A and H (no readable text or symbols beyond labels)

Step 3

First place the metal cage body on top of the glass tank, ensuring that the wire is placed of H. Then assemble 4 spring clips E.

Technical diagram of a structural frame with metal grid and support components (no text or symbols)

3D wireframe diagram of a grid structure with labeled point E (no text or symbols beyond label)

E

Two-panel black-and-white image showing structural elements with diagonal lines and a small rectangular component, no visible text or symbols.

Step 4

First, assemble platform F and ladder G, then install them in the corresponding position of shown in the diagram).

Three-panel image showing a black metal cage with labeled components: a handle, a wire cage with internal black blocks labeled 'F', and an inset view of a metal cage structure (no text or symbols present)

Step 5

Assemble wheel I, bowl J, water bottle K, and avoidance nest L.

Diagram illustrating a mechanical assembly process with labeled components I, K, J, L and a wire meshing setup for machining or assembly.

Step 6

Assemble the top D.

graph TD
    A["Initial Structure"] --> B{Rotation}
    B --> C["Component 1"]
    B --> D["Component 2"]
    B --> E["Component 3"]
    C --> F["D"]
    D --> G["B"]
    E --> H["D"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333

PRODUCT PARAMETER

Model	JM-XC-088
Net Weight	14.5kg
Gross weight	17.2kg
Colour	Black
Product Size	29.5 x 17.3 x 24in

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

EC REP: E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Roac Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.

1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a cat-shaped enclosure with internal components (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Simple line drawing of two identical building silos with windows, no text or symbols present

BX1

C×1

DX1

EX4

FX2

G×2

HX6

IX1

J×1

K×1

L×1

KROK MONTAŻU

3D wireframe diagram of a geometric object with labeled points B and C (no text or symbols beyond labels)

B C

A H

H

Close-up of mechanical components with labeled section A and H (no readable text or symbols beyond labels)

Krok 3

Technical diagram of a metal cage structure with labeled component E (no text or symbols beyond label)

3D wireframe diagram of a rectangular grid structure with labeled point E (no text or symbols on the diagram itself)

E

Two-panel black-and-white architectural detail showing vertical lines and structural elements (no text or symbols)

Krok 4

Three-panel image showing a black device with labeled 'F' and 'G' components, alongside a wire cage with an arrow pointing to a metal frame (no text or symbols on the devices themselves)

Krok 5

Diagram illustrating a mechanical assembly process with labeled components I, K, J, and L, showing progressive assembly from wire mesh to final component.

Krok 6

Złóż górną część D.

graph TD
    A["Initial Structure"] --> B{Condition 1}
    B -->|Yes| C["Component D"]
    B -->|No| D["Component B"]
    C --> E["Final Structure"]
    D --> E
    style A fill:#f9f,stroke:#333
    style E fill:#bbf,stroke:#333

Zrobione

3D wireframe model of a multi-compartment cage-like structure with internal components (no text or symbols visible)

PARAMETR PRODUKTU

Model	JM-XC-088
Masa netto	14,5 kg
Masa brutto	17,2 kg
Kolor	Czarny
Rozmiar produktu	29,5 x 17,3 x 24 cale

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN.

C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

Importowane do AUS: SIHAO PTY LTD.

1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd.

Apartament 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a cat's cage with internal components (no text or symbols visible)

3D wireframe diagram of a geometric object with labeled points B and C (no text or symbols beyond labels)

B C

Passo 2Passo 1

Close-up of mechanical components with labeled section A and H (no readable text or symbols beyond labels)

Passo 3

Technical diagram of a wire cage structure with labeled component E (no text or symbols beyond label)

3D wireframe diagram of a rectangular grid structure with labeled point E (no text or symbols beyond label)

E

Two-panel black-and-white architectural diagram showing vertical lines and structural elements (no text or symbols)

Passo 4

Three-panel image showing a black device with labeled 'F' and 'G' components, alongside a wire cage with an arrow pointing to a metal frame (no text or symbols on the devices themselves)

Passo 5

I I K J L

Passo 6

3D wireframe model of a multi-compartment cage-like structure with internal components (no text or symbols visible)

PARAMETRO PRODOTTO

C/O YH Consulting Limited Ufficio 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Importato in AUS: SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a cat's cage with internal components (no text or symbols visible)

3D wireframe diagram of a geometric object with labeled points B and C (no text or symbols beyond labels)

B C

Paso 2 Paso 1

Close-up of mechanical components with labeled section A and H (no readable text or symbols beyond labels)

Paso 3

Technical diagram of a metal cage structure with labeled component E (no text or symbols beyond label)

3D wireframe diagram of a rectangular grid structure with labeled point E (no text or symbols beyond label)

E

Two-panel black-and-white architectural detail showing vertical lines and structural elements (no text or symbols)

Paso 4

Three-panel image showing a black metal cage with labeled components (F and G), an open cage, and a close-up of a metal cage structure (no text or symbols present)

Paso 5

Diagram illustrating a mechanical assembly process with labeled components I, K, J, and L, showing progressive assembly from wire mesh to final component.

Paso 6

Ensamble la parte superior D.

graph TD
    A["Building with grid lines"] --> B{Condition}
    B -->|Yes| C["Structure with D component"]
    B -->|No| D["Structure with B component"]
    C --> E["Final structural diagram with D and B labels"]
    D --> F["Final structural diagram with D and B labels"]

Hecho

3D wireframe model of a multi-compartment cage-like structure with internal components (no text or symbols visible)

PARÁMETRO DEL PRODUCTO

C/O YH Consulting Limited Oficina 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Importado a AUS: SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a cat's cage with internal components (no text or symbols visible)

BEHÖVER HJÄLP? KONTAKTA OSS!

Simple line drawing of two identical building silos with windows, no text or symbols present

BX1

C×1

DX1

EX4

FX2

G×2

HX6

IX1

J×1

K×1

L×1

MONTERINGSTEG

3D wireframe diagram of a geometric object with labeled points B and C (no text or symbols beyond labels)

B C

Steg 2Steg 1

Close-up of mechanical components with labeled section A and H (no readable text or symbols beyond labels)

Steg 3

Technical diagram of a metal cage structure with labeled component E (no text or symbols beyond label)

3D wireframe diagram of a rectangular grid structure with labeled point E (no text or symbols beyond label)

E

Two-panel black-and-white architectural detail showing vertical lines and structural elements (no text or symbols)

Steg 4

Three-panel image showing a black metal cage with labeled components (F and G), an open cage, and a close-up of a metal frame structure (no text or symbols present)

Steg 5

Diagram illustrating a mechanical assembly process with labeled components I, K, L, and J, showing progressive assembly from wire mesh to final component.

Steg 6

Montera toppen D.

graph TD
    A["Section D"] --> B["Flow Direction"]
    B --> C["Section D with Internal Structure"]
    C --> D["Section D with Arrows"]
    D --> E["Section D with Arrows"]
    E --> F["Section D with Arrows"]
    F --> G["Section D with Arrows"]
    G --> H["Section D with Arrows"]
    H --> I["Section D with Arrows"]
    I --> J["Section D with Arrows"]
    J --> K["Section D with Arrows"]
    K --> L["Section D with Arrows"]
    L --> M["Section D with Arrows"]
    M --> N["Section D with Arrows"]
    N --> O["Section D with Arrows"]
    O --> P["Section D with Arrows"]
    P --> Q["Section D with Arrows"]
    Q --> R["Section D with Arrows"]
    R --> S["Section D with Arrows"]
    S --> T["Section D with Arrows"]
    T --> U["Section D with Arrows"]
    U --> V["Section D with Arrows"]
    V --> W["Section D with Arrows"]
    W --> X["Section D with Arrows"]
    X --> Y["Section D with Arrows"]
    Y --> Z["Section D with Arrows"]

Gjort

3D wireframe model of a multi-compartment cage-like structure with internal components (no text or symbols visible)

PRODUKTPARAMETER

Modell	JM-XC-088
Nettovikt	14,5 kg
Bruttovikt	17,2 kg
Färg	Svart
Produktstorlek	29,5 x 17,3 x 24 tum

Tillverkare: Shanghaimuxinmuyeyouxiangongsi
Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
EC REP: E-CrossStu GmbH.
Mainzer Landstr.69, 60329 Frankfurt am Main.
UK REP: YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
Importerad till AUS: SIHAO PTY LTD.
1 ROKEVA STREETEASTWOOD NSW 2122 Australien
Importerad till USA: Sanven Technology Ltd.
Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

HAMSTERKOOI

GEBRUIKERSHANDLEIDING

MODEL: JM-XC-088

3D wireframe model of a cat-shaped enclosure with internal components (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

3D wireframe diagram of a geometric object with labeled points B and C (no text or symbols beyond labels)

B C

Stap 2

Close-up of mechanical components with labeled section A and H (no readable text or symbols beyond labels)

Stap 3

Technical diagram of a metal cage structure with labeled component E (no text or symbols beyond label)

3D wireframe diagram of a rectangular grid structure with labeled point E (no text or symbols beyond label)

E

Two-panel black-and-white architectural detail showing vertical lines and structural elements (no text or symbols)

Stap 4

Three-panel image showing a black metal cage with labeled components (F and G), an open cage, and a close-up of a metal cage structure (no text or symbols present)

Stap 5

Diagram illustrating a mechanical assembly process with labeled components I, K, J, and L, showing progressive assembly from wire mesh to final component.

Stap 6

3D wireframe model of a multi-compartment cage-like structure with internal components (no text or symbols visible)

PRODUCTPARAMETER

Model	JM-XC-088
Netto gewicht	14,5 kg
	17,2 kgBrutogewicht
Kleur	Zwart
Productgrootte	29,5 x 17,3 x 24 inch

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

EG-REP: E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Frankfurt am Main.

VK VERTEGENWOORDIGING: YH CONSULTING LIMITED.

C/O YH Consulting Limited Kantoor 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e- garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a cat's cage with internal components (no text or symbols visible)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Simple line drawing of two identical building silos with windows, no text or symbols present

BX1

C×1

DX1

EX4

FX2

GX2

HX6

IX1

J×1

K×1

L×1

ÉTAPE D'ASSEMBLAGE

3D wireframe diagram of a geometric object with labeled points B and C (no text or symbols beyond labels)

B C

Étape 2Étape 1

Close-up of mechanical components with labeled section A and H (no readable text or symbols beyond labels)

Étape 3

Technical diagram of a metal cage structure with labeled component E (no text or symbols beyond label)

3D wireframe diagram of a rectangular grid structure with labeled point E (no text or symbols beyond label)

E

Two-panel black-and-white architectural diagram showing vertical lines and structural elements (no text or symbols)

Étape 4

Three-panel image showing a black metal cage with labeled components (F and G), an open cage, and a close-up of a metal frame structure (no text or symbols present)

Étape 5

Diagram illustrating a mechanical assembly process with labeled components I, K, L, and J, showing progressive assembly from wire mesh to final component.

Étape 6

graph TD
    A["Section D"] --> B["Flow Direction"]
    B --> C["Section D with Internal Structure"]
    C --> D["Section D with Arrows"]
    D --> E["Section B with Arrows"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333

Fait

3D wireframe model of a multi-compartment cage-like structure with internal components (no text or symbols visible)

PARAMÈTRE DU PRODUIT

A/S YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Importé en AUS : SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australie

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a cat-shaped enclosure with internal structure (no text or symbols)

Simple line drawing of two identical building silos with windows, no text or symbols present

BX1

C×1

DX1

EX4

FX2

GX2

HX6

IX1

J×1

K×1

L×1

MONTAGESTRITT

Schritt 1

3D wireframe diagram of a geometric object with labeled points B and C (no text or symbols beyond labels)

B C

Schritt 2

Close-up of mechanical components with labeled section A and H (no readable text or symbols beyond labels)

Schritt 3

Technical diagram of a metal cage structure with labeled component E (no text or symbols beyond label)

3D wireframe diagram of a rectangular grid structure with labeled point E (no text or symbols beyond label)

E

Two-panel black-and-white architectural detail showing vertical lines and structural elements (no text or symbols)

Schritt 4

Three-panel image showing a black metal cage with labeled components (F and G), an open cage, and a close-up of a metal frame structure (no text or symbols present)

Schritt 5

Diagram illustrating a mechanical assembly process with labeled components I, K, L, and J, showing progressive assembly from wire mesh to final component.

Schritt 6

3D wireframe model of a multi-compartment cage-like structure with internal components (no text or symbols visible)

PRODUKTPARAMETER

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE