HZS003 - Shoe storage furniture Vevor - Free user manual and instructions

USER MANUAL HZS003 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SHOECABINET

USERMANUAL

MODEL:HZS003

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

SHOECABINET

MODEL:HZS003

Line drawing of a three-tiered cabinet or shelf unit with drawers, no text or symbols present

NEEDHELP?CONTACTUS!

Have product questions? Need technical support? Please feel free to contact us:

[e-mail]

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

SAFETYINSTRUCTIONS

WARNING:

Read this instructions carefully before using this product. Failure to do so can result in serious injury.

Assembly precautions

1. Assemble only should be according to these instructions. Improper assembly can result in hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the shoe cabinet.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this item.
3. Do not exceed weight capacities.
4. Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded shoe cabinet.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.

SAVETHESEINSTRUCTIONS

screw 4x40mm wood plug 6x30mm screw 4x16mm door pull 96mm screw 3.5x14mm4x12mm screw shackles A 18+2PCSB4PCS C6PCS D3PCSE36+2PCSF6PCSG4PCS Left and right plastic shoe rack bones H1H2 Three-piece nut Sticker sheet φ12mm Anti-falling iron sheet screw 3x14mm H 3SETSL I 6SETS J 16+2PCSK 4PCS2PCS Anti-dumping belt Plastic expansion nail 6x30mm pull rod eccentric (wheel) 6x35mm φ15x9mm spacer φ10mm4x12mm Umbrella hook M 2PCS N2PCS O4PCSP 4PCS Q 6PCS2P CSR S2PCS spanner 4x62mm T 1PC

©

2

graph LR
    A[" allele A"] -->|x16| B[" allele J"]
    B -->|x16| C[" allele A"]

Technical diagram of a mechanical assembly with labeled components and screw fasteners

	A x 16PCS
	J x 16PCS

5 O x 4PCS 6 P x 4PCS 180° ① ② ③ ④ ⑤ ⑥ P x 4PCS

7
	E x 18PCS
	H1 x 3PCS
	H2 x 3PCS
8
9	E
[XSG2]	E x 6PCS
10
11
		E x 6PCS
12
	C x 6PCS
	D x 3PCS
	Q x 6PCS

13

Technical diagram of a multi-level cabinet with numbered components and a 3x3 x3 scale indicator.

14

① ② ③ ④ ⑤ F I3 x3 F I3 x6

			F x 6PCS
			I3 x 6PCS

15

① ② ③ ④ ⑦ ⑤ x3

16

E x6

① ② ③ ④ ⑤ ⑥ E x3

E x 6PCS

17

K 1 K K L x2 3 4

	K×2PCS
	L×2PCS

18 A x 2PCS K x 2PCS N x 2PCS

19 M M M S R R R M x 2PCS R x 2PCS S x 2PCS

PRODUCTPARAMETER

Package size (mm)	1316×425×139
Size (mm)	600*237*1200
Colour White
Type 3 layers
Texture Chipboard
Base No legs
Load-bearing	≥100 lbs

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REPU

Pooledas Group Ltd

Knit 5 Albert Edward House, The Pavilions

Preston, United Kingdom

REPE

SHUNSHUN GmbH

Römeräcker 9 Z2021, 76351

TechnicalSupportandE-WarrantyCertificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a three-tiered cabinet with drawers, no text or symbols present

BESOIN D'AIDE ? CONTACTEZ-NOUS !

Technical diagram of a mechanical assembly with labeled components and bolted connections

	A×16PCS
	J×16PCS

7 E x 18PCS H1 x 3PCS H2 x 3PCS x3 E E E ⑤ x3 8 ⑦ ⑤ x3 9 E ⑦ ⑤ x3 E x6 E x 6PCS

E H2 E E E E H1 ⑤ x3

E x18

⑦ ⑤ x3

E ⑦ ⑤ x3

E x6

10
11	x3
	E x 6PCS
12
	C x 6PCS
	D x 3PCS
	Q x 6PCS

13

Technical diagram of a multi-level cabinet with numbered components and a 3x3 x3 scale indicator.

14

① ② ③ ④ ⑤ F I3 F I3 x3 F I3 x6

			F x 6PCS
			I3 x 6PCS

15

① ② ③ ④ ⑤ ⑦ x3

16

E x6

① ② ③ ④ ⑤ ⑥ E x3

E x 6PCS

17

Technical diagram of a multi-level storage or lifting cabinet with labeled components and an inset showing a mechanical setup with a load labeled L and cross-section view.

	K×2PCS
	L×2PCS

graph TD
    A["18"] --> B["Step 1: Screw, Drill Bit"]
    B --> C["Step 2: Drill Bit with N and K dimensions"]
    C --> D["Step 3: Drill Bit with N and K dimensions"]
    D --> E["Step 4: Drill Bit with N and K dimensions"]
    E --> F["End"]

19 M M M S R R R M x 2PCS R x 2PCS S x 2PCS

PARAMÈTRE DU PRODUIT

Line drawing of a three-tiered cabinet with drawers, no text or symbols present

Technical diagram of a multi-panel storage unit with numbered components and cross-sectional view labeled x3

1

I1 x6 I2 x6 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 ② ③

	I1 x 6PCS
	I2 x 6PCS

2

graph LR
    A[" allele: A"] -->|x16| B[" allele: J"]
    B -->|x16| C[" allele: A + J"]

Technical diagram of a mechanical assembly with labeled components and bolted connections

	A×16PCS
	J×16PCS

7 E x 18PCS H1 x 3PCS H2 x 3PCS x3 E E E ⑤ x3 8 ⑦ ⑤ x3 9 E ⑦ ⑤ x3 E x6 E x 6PCS

E H2 E E E E H1 ⑤ x3

E x18

⑦ ⑤ x3

E ⑦ ⑤ x3

E x6

10
11	x3
	E x 6PCS
12
	C x 6PCS
	D x 3PCS
	Q x 6PCS

13

Technical diagram of a multi-level cabinet with numbered components and a 3x3 x3 scale indicator.

14

① ② ③ ④ ⑤ F I3 F I3 x3 F I3 x6

			F x 6PCS
			I3 x 6PCS

15

① ② ③ ④ ⑤ ⑦ x3

16

E x6

① ② ③ ④ ⑤ ⑥ E x3

E x 6PCS

17

K 1 K K L x2 3 4

	K×2PCS
	L×2PCS

graph TD
    A["18"] --> B["Step 1: A x 2PCS"]
    B --> C["Step 2: K x 2PCS"]
    C --> D["Step 3: N x 2PCS"]
    D --> E["Step 4: A x 2PCS"]
    E --> F["Step 5: N x 2PCS"]
    F --> G["Step 6: A x 2PCS"]
    G --> H["Step 7: N x 2PCS"]
    H --> I["Step 8: A x 2PCS"]
    I --> J["Step 9: N x 2PCS"]
    J --> K["Step 10: A x 2PCS"]
    K --> L["Step 11: N x 2PCS"]
    L --> M["Step 12: A x 2PCS"]
    M --> N["Step 13: N x 2PCS"]
    N --> O["Step 14: A x 2PCS"]
    O --> P["Step 15: N x 2PCS"]
    P --> Q["Step 16: A x 2PCS"]
    Q --> R["Step 17: N x 2PCS"]
    R --> S["Step 18: A x 2PCS"]

19 M M M S R R R M x 2PCS R x 2PCS S x 2PCS

PRODUKTPARAMETER

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a three-tiered cabinet with drawers, no text or symbols present

Technical diagram of a mechanical assembly with labeled components and bolted connections

	A×16PCS
	J×16PCS

7 E x 18PCS H1 x 3PCS H2 x 3PCS x3 E E E ⑤ x3 8 ⑦ ⑤ x3 9 E ⑦ ⑤ x3 E x6 E x 6PCS

E H2 E E E E H1 ⑤ x3

E x18

⑦ ⑤ x3

E ⑦ ⑤ x3

E x6

10
11	x^3
		E x 6PCS
12
	C x 6PCS
	D x 3PCS
	Q x 6PCS

13

Technical diagram of a multi-level cabinet with numbered components and a 3x3 x3 scale indicator.

14

① ② ③ ④ ⑤ F Io3 F Io3 x3 x6

			F x 6PCS
			I3 x 6PCS

15

① ② ③ ④ ⑤ ⑦ x3

16

E x6

① ② ③ ④ ⑤ ⑥ E x3

E x 6PCS

17

Technical diagram of a multi-level storage or lifting cabinet with labeled components and an inset showing a mechanical setup with a load labeled L and cross-section view.

	K×2PCS
	L×2PCS

graph TD
    A["18"] --> B["Step 1: Screw, Drill Bit"]
    B --> C["Step 2: Drill Bit with N and K dimensions"]
    C --> D["Step 3: Drill Bit with N and K dimensions"]
    D --> E["Step 4: Drill Bit with N and K dimensions"]
    E --> F["End"]

19 M M M S R R R M x 2PCS R x 2PCS S x 2PCS

PARAMETRO DELPRODOTTO

Importato in AUS: SIHAO PTY LTD, 1 ROKESTAREETEASTWOOD

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a three-tiered cabinet with drawers, no text or symbols present

7 E x 18PCS H1 x 3PCS H2 x 3PCS x3 E E E E E x18 8 ⑦ ⑤ x3 9 E ⑦ ⑤ x3 E x6 E x 6PCS

E H2 E E E E H1 ⑤ x3

E x18

⑦ ⑤ x3

E ⑦ ⑤ x3

E x6

10
11	x3
	E x 6PCS
12
	C x 6PCS
	D x 3PCS
	Q x 6PCS

13

Technical diagram of a multi-level cabinet with numbered components and a 3x3 x3 scale indicator.

14

① ② ③ ④ ⑤ F I3 F I3 x3 F I3 x6

			F x 6PCS
			I3 x 6PCS

15

① ② ③ ④ ⑤ ⑦ x3

16

E x6

① ② ③ ④ ⑤ ⑥ E x3

E x 6PCS

17

K 1 K K L x2 3 4

	K×2PCS
	L×2PCS

graph TD
    A["18"] --> B["Step 1: Screw, Drill Bit"]
    B --> C["Step 2: A x 2PCS, K x 2PCS, N x 2PCS"]
    C --> D["Step 3: Drill Bit with N, K, A components"]
    D --> E["Step 4: Drill Bit with N, K, A components"]

19 M M M S R R R M x 2PCS R x 2PCS S x 2PCS

PARÁMETRO DELPRODUCTO

Importado a AUS: SIHAO PTY LTD, 1 ROKEVA STREET, EASTWOOD NSW 2122 Australia

Importado a EE. UU.: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REPRESENTANTE DEL REINOUNIDO

Grupo Pooledas Ltd

Line drawing of a three-tiered cabinet with drawers, no text or symbols present

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Technical diagram of a mechanical assembly with labeled components and bolted connections

	A×16PCS
	J×16PCS

	E x 18PCS
	H1 x 3PCS
	H2 x 3PCS

E x 6PCS

10
11	x3
	E x 6PCS
12
	C x 6PCS
	D x 3PCS
	Q x 6PCS

13

Technical diagram of a multi-level cabinet with numbered components and a 3x3 x3 scale indicator.

14

① ② ③ ④ ⑤ F I3 F x3 F I3 x6

			F x 6PCS
			I3 x 6PCS

15

① ② ③ ④ ⑤ ⑦ x3

16

E x6

① ② ③ ④ ⑤ ⑥ E x3

E x 6PCS

17

Technical diagram of a multi-level storage or lifting cabinet with labeled components and an inset showing a mechanical setup with a load labeled L and cross-section view.

	K×2PCS
	L×2PCS

graph TD
    A["18"] --> B["Step 1: A x 2PCS"]
    B --> C["Step 2: K x 2PCS"]
    C --> D["Step 3: N x 2PCS"]
    D --> E["Step 4: A x 2PCS"]
    E --> F["Step 5: N x 2PCS"]
    F --> G["Step 6: A x 2PCS"]
    G --> H["Step 7: N x 2PCS"]
    H --> I["Step 8: A x 2PCS"]
    I --> J["Step 9: N x 2PCS"]
    J --> K["Step 10: A x 2PCS"]
    K --> L["Step 11: N x 2PCS"]
    L --> M["Step 12: A x 2PCS"]
    M --> N["Step 13: N x 2PCS"]
    N --> O["Step 14: A x 2PCS"]
    O --> P["Step 15: N x 2PCS"]
    P --> Q["Step 16: A x 2PCS"]
    Q --> R["Step 17: N x 2PCS"]
    R --> S["Step 18: A x 2PCS"]

19 M M M S R R R M x 2PCS R x 2PCS S x 2PCS

PARAMETR PRODUKTU

Importowane do AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA1730

REP WIELKIEJBRYTANII

Grupa Pooledas Ltd

Jednostka 5 Albert Edward House, Pawilony

Line drawing of a three-tiered cabinet with drawers, no text or symbols present

HULP NODIG? NEEM CONTACT MET ONS OP!

[e-mail]

Technical diagram of a mechanical assembly with labeled components and bolted connections

	A×16PCS
	J×16PCS

7 E x 18PCS H1 x 3PCS H2 x 3PCS x3 E E E ⑤ x3 8 ⑦ ⑤ x3 9 E ⑦ ⑤ x3 E x6 E x 6PCS

E H2 E E E E H1 ⑤ x3

E x18

⑦ ⑤ x3

E ⑦ ⑤ x3

E x6

10
11	x3
E x 6PCS
12
	C x 6PCS
	D x 3PCS
	Q x 6PCS

13

Technical diagram of a multi-level cabinet with numbered components and a 3x3 x3 scale indicator.

14

① ② ③ ④ ⑤ F I3 F I3 x3 F I3 x6

			F x 6PCS
			I3 x 6PCS

15

① ② ③ ④ ⑤ ⑦ x3

16

E x6

① ② ③ ④ ⑤ ⑥ E x3

E x 6PCS

17

K 1 K K L x2 3 4

	K×2PCS
	L×2PCS

graph TD
    A["18"] --> B["Step 1: A x 2PCS"]
    B --> C["Step 2: K x 2PCS"]
    C --> D["Step 3: N x 2PCS"]
    D --> E["Step 4: A x 2PCS"]
    E --> F["Step 5: N x 2PCS"]
    F --> G["Step 6: A x 2PCS"]
    G --> H["Step 7: N x 2PCS"]
    H --> I["Step 8: A x 2PCS"]
    I --> J["Step 9: N x 2PCS"]
    J --> K["Step 10: A x 2PCS"]
    K --> L["Step 11: N x 2PCS"]
    L --> M["Step 12: A x 2PCS"]
    M --> N["Step 13: N x 2PCS"]
    N --> O["Step 14: A x 2PCS"]
    O --> P["Step 15: N x 2PCS"]
    P --> Q["Step 16: A x 2PCS"]
    Q --> R["Step 17: N x 2PCS"]
    R --> S["Step 18: A x 2PCS"]

19 M M M S R R R M x 2PCS R x 2PCS S x 2PCS

PRODUCTPARAMETER

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a three-tiered cabinet with drawers, no text or symbols present

BEHÖVER DU HJÄLP? KONTAKTA OSS!

7 E x 18PCS H1 x 3PCS H2 x 3PCS x3 E E E E E x18 8 ⑦ ⑤ x3 9 E ⑦ ⑤ x3 E x6 E x 6PCS

E H2 E E E E H1 ⑤ x3

E x18

⑦ ⑤ x3

E ⑦ ⑤ x3

E x6

10
11	x3
	E x 6PCS
12
	C x 6PCS
	D x 3PCS
	Q x 6PCS

13

Technical diagram of a multi-level cabinet with numbered components and a 3x3 x3 scale indicator.

14

① ② ③ ④ ⑤ F I3 F I3 x3 F I3 x6

		F x 6PCS
		I3 x 6PCS

15

① ② ③ ④ ⑤ ⑦ x3

16

E x6

① ② ③ ④ ⑤ ⑥ E x3

E x 6PCS

17

K 1 K K L x2 3 4

	K×2PCS
	L×2PCS

18 A x 2PCS K x 2PCS N x 2PCS

19 M M M S R R R M x 2PCS R x 2PCS S x 2PCS

PRODUKTPARAMETER

www.vevor.com/support