JQ-3025SMH - Garage flooring Vevor - Free user manual and instructions

Brand	Vevor
Model	JQ-3025SMH
Product Type	Garage Floor Covering
Covered Surface	25 square feet (approx. 2.32 m²)
Number of Pieces	25 pieces
Total Net Weight	6.96 kg
Material	Resistant Polymer Composite
Color	Light Gray (Silver)
Intended Use	Garage floor covering, protects concrete
Maintenance and Cleaning	Hand washing recommended; do not use corrosive detergents, metal brushes, or abrasive sponges
Safety	Do not expose to direct heat, flame, or boiling water; keep out of reach of children
Initial Odor	Mild non-toxic odor dissipating after a few days
Chemical Resistance	Do not contact with corrosive chemicals
Spare Parts	Not available separately; product sold as complete kit
Repairability	Not repairable; if damaged, replace the piece or the whole set
Warranty	Electronic warranty certificate available at www.vevor.com/support
Technical Support	www.vevor.com/support
Country of Origin	Made in China

Frequently Asked Questions - JQ-3025SMH Vevor

How to install the Vevor JQ-3025SMH floor covering?

Installation is done by interlocking the tiles. Make sure to prepare a clean, dry, and level surface. Start from a corner and extend the tiles by snapping them together. Consult the full manual for details.

Does the product have an odor?

Yes, a slight odor may be present upon opening. It is non-toxic and dissipates naturally after a few days of use.

How to clean this floor covering?

Hand wash with a soft cloth and soapy water. Never use corrosive detergents, metal brushes, or abrasive sponges.

Can I use this covering outdoors?

This product is designed for indoor use, particularly in garages. Prolonged exposure to weather could damage it.

What is the covered area of model JQ-3025SMH?

The JQ-3025SMH model covers 25 square feet (approx. 2.32 m²) and contains 25 tiles.

Is the covering resistant to oil stains?

Yes, the material is resistant to common stains such as oil and mild chemicals. Clean spills quickly to avoid marks.

Is this product slip-resistant?

The tiles offer good grip even when wet. However, be cautious when walking on wet surfaces.

Can I cut the tiles to adjust size?

Yes, you can cut the tiles to the desired size using a utility knife. Measure carefully before cutting.

How to get a spare part?

This product is sold as a kit and spare parts are not available individually. If damaged, contact Vevor support at www.vevor.com/support.

Is the product under warranty?

Yes, Vevor offers a warranty. To activate your electronic warranty, go to www.vevor.com/support with your certificate.

USER MANUAL JQ-3025SMH Vevor

GARAGE FLOORING

MODEL: JQ-3050BK / JQ-3025BK / JQ-3050SMH / JQ-3025SMH / JQ-3050SL / JQ-3050RD / JQ-3025RD / JQ-3050BU / JQ-3025BU

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us whether you are actually saving half in comparison with the top major brands.

MODEL: JQ-3050BK / JQ-3025BK / JQ-3050SMH / JQ-3025SMH / JQ-3050SL / JQ-3050RD / JQ-3025RD / JQ-3050BU / JQ-3025BU

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

PARAMETER LIST

Model	Total covered area(Sq.Ft)	Number of pieces(pcs)	total net weight(kg)
JQ-3050BK	50	50	13.9
JQ-3025BK	25	25	6.96
JQ-3050SMH	50	50	13.9
JQ-3025SMH	25	25	6.96
JQ-3050SL	50	50	13.9
JQ-3025SL	25	25	6.96
JQ-3050RD	50	50	13.9
JQ-3025RD	25	25	6.96
JQ-3050BU	50	50	13.9
JQ-3025BU	25	25	6.96

SECURITY & WARNINGS

General Safety Rules

WARNING: Please read carefully the following instructions in order to reduce the risk of injuries, accidents, or damage to the product.

1. When you first open the box, you will notice a pungent odor. Please don't worry; this odor is non-toxic and will dissipate after a few days of use.
2. Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
3. Please don't put the product beside a heating plant or fires, or pour water on it in case of fires, burns and deformation dangers.
4. Please don't allow babies and children to put fragments of this product

into their mouth.

1. Please do not put the product into the washing machine, it is recommended to wash by hand.
2. Please do not contact this product with corrosive chemicals and sharp knives.
3. Children and minors are not allowed to use this product to avoid personal injury.
4. The safety precautions and instructions given in this manual are up to cover in detail all the conditions and situations that may arise.
5. The operator and/or user must use common sense and caution when operating the product especially for any matters that are not referred above.

SAVE THESE INSTRUCTIONS

OPERATION

Installation instructions

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

Pooledas Group Ltd

Unit 5 Albert Edward House, The Pavilion Preston, United Kingdom

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021, 76351

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

L/JQ-3050RD/JQ-3025RD/JQ-3050BU/JQ-3025BU

L/JQ-3050RD/JQ-3025RD/JQ-3050BU/JQ-3025BU

NEED HELP? CONTACT US!

Installation instructions

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported in Australia:

SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Installation instructions

www.vevor.com/support

©

VEVOR®

TOUGH TOOLS, HALF PRICE

Installation instructions

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported in AUS:

SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Pooledas Ltd Group

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

L/JQ-3050RD/JQ-3025RD/JQ-3050BU/JQ-3025BU

Installation instructions

L/JQ-3050RD/JQ-3025RD/JQ-3050BU/JQ-3025BU

L/JQ-3050RD/JQ-3025RD/JQ-3050BU/JQ-3025BU

Installation instructions

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS:

SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP WIEL KIEJ BRYTANII

Pooledas Group Ltd.

Unit 5 Albert Edward House, Pavilions

Installation instructions

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Unit 5 Albert Edward House, De Paviljoens

Installation instructions

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS:

SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

Pooledas Group Ltd

Unit 5 Albert Edward House, The Pavilions

www.vevor.com/support