ALZM300-300-10 - Flooring Vevor - Free user manual and instructions

Product type	Removable WPC tile flooring
Brand	Vevor
Model	ALZM300-300-10
Main use	Event flooring, indoor/outdoor
Material	Wood-plastic composite (WPC)
Tile dimensions	300 mm x 300 mm (≈ 30.5 cm x 30.5 cm)
Number of tiles	10 pieces
Total coverage area	10 sq ft (≈ 0.93 m²)
Total net weight	4.73 kg
Installation type	Glueless interlocking (DIY system)
Floor preparation	Clean, flat, and firm; max deviation 5 mm/m
Required tools	Saw and work gloves
Routine maintenance	Regular cleaning with mild detergent or water
Deep cleaning	Detergent containing sodium hypochlorite (mold)
Products to avoid	Corrosive detergents, wire brushes, organic solvents (kerosene, gasoline)
Max. operating temperature	Avoid prolonged exposure to high temperatures (e.g., barbecue, heater)
Water resistance	Moderate water absorption; good drainage recommended
Usage precautions	Do not drop heavy objects, avoid sharp objects
Repairability	Individual tile replacement possible
Warranty	Technical support and electronic warranty certificate at www.vevor.com/support

Frequently Asked Questions - ALZM300-300-10 Vevor

How to install Vevor ALZM300-300-10 tiles?

Installation is done by simple interlocking without glue. Make sure the floor is clean, flat, and firm (max deviation 5 mm/m). Start from a corner, interlock the tiles one by one. Use a saw and work gloves to cut tiles if necessary.

Can I install these tiles directly on sand or soil?

No, it is not recommended to place WPC tiles directly on loose ground (soil, gravel, sand). The floor must be clean, flat, and firm to ensure stability and avoid deformation.

How to maintain Vevor ALZM300-300-10 tiles?

Clean regularly with a mild detergent or water to remove dirt. For mold stains, use a cleaner containing sodium hypochlorite. Avoid corrosive detergents, wire brushes, and organic solvents.

Are these tiles suitable for outdoor use?

Yes, they are suitable for outdoor event use. However, avoid prolonged exposure to high temperatures (barbecue, heater) and ensure good drainage to prevent water accumulation.

What area does a pack of 10 tiles cover?

The total coverage area is 10 sq ft (approximately 0.93 m²). Each tile measures 300 mm x 300 mm.

Can I replace a single damaged tile?

Yes, the tiles are independent and can be replaced individually. Lift the damaged tile and interlock a new one in its place.

Which chemicals should I avoid on WPC tiles?

Avoid contact with kerosene, gasoline and other organic solvents, as they can damage the material. Use only mild detergents.

Does the floor need to be perfectly level?

The floor must be clean, flat, and firm. A deviation of 5 mm per meter maximum is tolerated. Beyond that, the tiles could deform or interlock poorly.

How to clean rust stains on the tiles?

Use a phosphoric detergent for rust stains. Apply according to product instructions, rinse thoroughly with water.

Where to find the electronic warranty certificate?

Visit the website www.vevor.com/support to get technical assistance and download your electronic warranty certificate.

USER MANUAL ALZM300-300-10 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

EVENT-FLOORING

MODEL: ALSL300-300-36 (SH) / ALSL300-300-10 (SH) / ALSL300-300-54

(SH) / ALSL300-300-10 (SZ) / ALSL300-300-36 (SZ) / ALSL300-300-54

(SZ) / ALSL300-300-54 (SZ) / ALSM300-300-10 (SZ)

/ALZM300-300-10/ALZM300-300-27

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

MODEL: ALSL300-300-36 (SH) / ALSL300-300-10 (SH) / ALSL300-300-54 (SH) / ALSL300-300-10 (SZ) / ALSL300-300-36 (SZ) / ALSL300-300-54 (SZ) / ALSM300-300-27 (SZ) / ALSM300-300-10 (SZ) / ALZM300-300-10 / ALZM300-300-27

The picture is for reference only, the product is subject to the actual product.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

PARAMETER LIST

Model	Total covered area(Sq.Ft)	Number of pieces(pcs)	total net weight(kg)
ALSL300-300-36 (SH)	36	36	9
ALSL300-300-10 (SH)	10	10	2.5
ALSL300-300-54 (SH)	54	54	13.5
ALSL300-300-10 (SZ)	10	10	2.5
ALSL300-300-36 (SZ)	36	36	9
ALSL300-300-54 (SZ)	54	54	13.5
ALSM300-300-27 (SZ)	27	27	24.3
ALSM300-300-10 (SZ)	10	10	9
ALZM300-300-10	10	10	4.73
ALZM300-300-27	27	27	13.5

SECURITY & WARNINGS

General Safety Rules

WARNING: Please read the following instructions carefully to reduce the risk of injuries, accidents, or damage to the product. 1. Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product. 2. Do not place the product near heating plants or fires, or pour water on it, to avoid fire, burns, and deformation.

1. Do not allow babies and children to put fragments of this product into their mouths.
2. Do not let this product come into contact with corrosive chemicals or sharp knives.
3. Children and minors are not allowed to use this product to avoid personal injury.
4. The safety precautions and instructions given in this manual do not cover all conditions and situations that may arise.
5. The operator and/or user must use common sense and caution when operating the product, especially for any matters not referred to above.

SAVE THESE INSTRUCTIONS

REPAIR

Avoid exposing WPC tiles to high temperatures, such as from tools or equipment (e.g., heating, barbecuing, etc.). This can cause deformation, discoloration, or other damage.

• Do not allow kerosene, gasoline, or other organic solvents to come into contact with WPC tiles.
• Do not place metal materials on WPC tiles to avoid rust.
• Do not place heavy objects directly on WPC tiles, and do not place heavy objects on WPC tiles.

Avoid hitting or striking with sharp objects to prevent injury.

• During transportation, installation, and storage, be careful not to drop the product from high places.
• While WPC tiles require little maintenance, regular cleaning can help keep them beautiful, and the proper detergent can enhance the effect.
• Use the pressure washer carefully to avoid damaging the material.
• Clean the floor regularly with mild detergent or water to remove sun dirt.
• Mold, berry and leaf contamination: Clean with detergents and cleaners containing sodium hypochlorite.
• Rust and dirt: Use phosphorous detergent.
• Grease pollution: Use detergent and degreaser.
• Often use tools to remove foreign objects from the ground to make it possible. Ensure smooth drainage.

INSTALLATION

• Installing WPC tiles requires a chainsaw and work gloves.
• Note: We do not recommend placing WPC tiles directly on the floor (soil, gravel, sand or other loose ground).

- Surface area must be calculated before installation. The soil must be clean, flat and firm.

- It absorbs water very well.

- The deviation from the ground should not exceed 5 mm.

Place floor DIY tiles correctly

The second floor tile is connected to the first WPC tile.

And complete the installation of the entire floor as the last step

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Producent: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District,

Shanghai 200000 CN.

Importer in Australia: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD

Place, Rancho Cucamonga, California 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai, 200.000 CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD

NSW 2122, Australia

Imported into the USA: Sanven Technology Ltd. Suite 250, 9166 Anal Ort, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

NEED HELP? CONTACT US!

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Place the floor DIY tiles correctly

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200 000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOC NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

YH CONSULTING LIMITED. C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP