B-4637 - Pool accessory Vevor - Free user manual and instructions

Product Type	Pool Ramp (Handrail)
Brand	Vevor
Model	B-4637
Material	Stainless Steel
Number of Pieces	3 (A, B, C)
Installation Method	Ground Anchoring (recessed parts not included)
Usage	Helps entering and exiting the pool
Load Capacity	Do not overload (no specific value, follow safety instructions)
Safety	Solid installation required, do not use sharp objects, do not let children play with it
Maintenance	Clean with a clean cloth
Assembly Precautions	Wear safety goggles and gloves, assemble with two people
Warranty	Electronic warranty certificate available at www.vevor.com/support
Technical Support	www.vevor.com/support
Repairability	Contact customer service for spare parts
Power Supply	None (non-electric product)
Main Functions	Secure pool access, provide stable support
Included Accessories	Fixing screws (recessed parts not included)
Instructions	User manual included in PDF format
Available Languages	FR, DE, EN, IT, NL, PL, SV and more
Intended Use	Residential pool
Mounting Type	Inclined (ramp)

Frequently Asked Questions - B-4637 Vevor

How to install the B-4637 pool ramp?

Installation requires first preparing a base anchored in the ground (recessed parts not provided). Then insert the handrail into the base and tighten the screws clockwise. It is recommended to perform the installation with two people for safety. Refer to the assembly diagram in the manual.

What safety precautions should be followed?

Before use, ensure the ramp is securely fixed. Do not overload to avoid accidents. Do not use sharp or cutting objects on the ramp. This product is not a toy: do not let children play with it. Wear goggles and gloves during assembly.

What tools do I need for assembly?

You will need a screwdriver or wrench to tighten the provided screws. The manual also recommends ANSI-approved safety goggles and sturdy work gloves. No special power tools are required.

Is the ramp compatible with all pool types?

The ramp is designed for residential pools with a floor suitable for anchoring. Ensure the mounting surface is solid (concrete, tile, etc.). Anchoring parts (base) are not included; you must purchase them separately according to your floor type.

How to maintain the pool ramp?

For routine maintenance, wipe the ramp with a clean, dry cloth. Avoid using abrasive products that could scratch the surface. Regularly inspect the fasteners to ensure they remain tight.

Can I use the ramp as a toy for children?

No, this product is not a toy. It is designed to help adults and children enter and exit the pool safely, but should not be used as a play or climbing support. Always supervise children nearby.

What to do if the ramp rusts?

The ramp is made of stainless steel, so it is rust-resistant under normal conditions. In case of stubborn stains, you can clean with a soft cloth and soapy water. Avoid harsh chemicals. If rust appears, contact customer service for advice.

What is the maximum weight capacity?

The manual does not specify an exact maximum load, but it is imperative not to overload the ramp to avoid injury. Use it only as support for entering or exiting, not as a seat or jumping support.

Where to find spare parts or accessories?

For spare parts (screws, mounting elements), contact customer service via www.vevor.com/support. The manual states that recessed parts (base) are not provided; you will need to purchase them separately.

How to contact Vevor customer service?

Go to www.vevor.com/support for technical assistance, electronic warranty certificate, and to ask questions. You can also use the chat or contact form available on the site.

USER MANUAL B-4637 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

POOL HANDRAILS

MODEL: B-4637

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

MODEL: B-4637

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

SAFE INSTRUCTIONS

CAUTION: Carefully read instructions and procedures for safe operation. Failure to do so can result in serious injury.

WARNING:

Before using the handrail, ensure that the handrail is securely installed to prevent personal injury and accidents.

1. When using the handrail, do not overload the handrail to avoid personal injury or accident.
2. Do not draw, cut, or use sharp objects on the handrail to avoid damage.
3. If you need to disassemble the handrail, please follow the reverse procedure to disassemble and store it properly.
4. This product is not a toy. Do not allow children to play with this product.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or under the influence of alcohol, drugs, or medication.
6. Product capabilities apply to properly and completely assembled products only.
7. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
8. For safety reasons, this hardware is recommended to be installed by qualified people.

SAVE THESE INSTRUCTIONS

COMPONENTS

No.	Picture	QTY
A		1
B		1
C		1

TIPS: When there is a stain on the handrail, you can wipe it with a clean cloth.

INSTALLATION INSTRUCTIONS

I. BASE MOUNTING METHOD

Step 1: Mounting base.

Step 2: Insert handrail.

II. INSTALLATION METHOD OF EMBEDDED PARTS

Step 1: Bury the embedded parts.

Step 2: Insert handrail.

Step 3: Tighten the screws clockwise.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

II. INSTALLATION METHOD FOR INTEGRATED PARTS

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangcheng Road 803, Lane 11, Room 1602A-1609, Baoshan District, Shanghai 200000, CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr. 69,

II. INSTALLATION METHOD FOR EMBEDDED PARTS

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd. Address:

Shuangcheng Road 803, Lane 11, Room 1602A-1609, Baoshan District, Shanghai 200000, CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported into the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

II. INSTALLATION METHOD OF EMBEDDED PARTS

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

REP.CE

E-CrossStu GmbH

Magonza Landstr.69,

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

YH CONSULTING LIMITADO. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

NEED HELP? CONTACT US!

II. INSTALLATION METHOD FOR BUILT-IN PARTS

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Importer to Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importer to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho

Cucamonga, CA 91730

RESPONSIBILITY. C/O YH Consulting Limited Office

147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

POOL RAILINGS

MODEL: B-4637

NEED HELP? CONTACT US!

INSTALLATION INSTRUCTIONS

I. BASIC MOUNTING METHOD

Step 1: Mounting base.

II. INSTALLATION METHOD FOR EMBEDDED PARTS

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr. 69,

Warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

II. INSTALLATION METHOD FOR EMBEDDED PARTS

Step 1: Bury the embedded parts.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support